"lighting fittings"

This huge new cultural center, located in the heart of the capital, covers an area of 214,000 square meters, which equates to the area of thirty football fields. It includes a 2,000-seat opera house, the first in the Gulf emirate, as well as a music center, a conference center and a library of historical documents. Inaugurated on Monday, October 31st, 2016, it bears the name of former Emir Sheikh Jaber al-Amad. Barrisol® has installed immense lightening membranes, giving the illusion that they are endlessness. Architect : SSH International, Architects

Our client saved 70% installation time on mechanical services throughout their project using Walraven RapidRail system, prefabricated before delivery to site.

Creating a branded retail experience with Breeze acoustic baffles in Rosella Red and black channel to reflect Pearls Bubble Tea’s corporate colour and tie in with the overall theme of the store.

Nissan Sunderland is one of the largest, most efficient car plants in Europe. On average, the plant has built a Nissan car every two minutes since production started.Project/doors:10 Speedor Cleanrooms (Over 200 doors supplied to the plant)The challengeFollowing the manufacture of a new paint plant where Hart have a number of doors including several ATEX, Nissan identified a requirement for new repair lines to enable them to carry out both light and heavy repairs and not have to completely repaint the vehicles. This is fast moving environment with the need for a reliable and dust reducing solution.The solutionUsing a tried and tested solution, Hart installed these “hybrid” Speedor Cleanrooms with ATEX operators within the repair zone. We worked closely with site engineers to give them the solution they require, rather than a door to fit an opening. The Speedor Cleanroom maintains strict air leakage requirements over specified pressure differentials and a non-touch safety light curtain which ensures maximum protection to personnel. The successHart is a trusted supplier to Nissan and its subcontractors. Having worked on the site since it’s inception, Nissan approached Hart to supply the doors. Following this Hart were approached by an OEM who provided a full spray booth, after Nissan insisted Hart Doors were specified due to the success of the earlier installations.The review“Speedor is a tried and tested product that is why we keep using them.” Nissan Motor Manufacturing UK Ltd

Following in the footsteps of a string of successful installations at the Northern General Hospital, Sheffield, Yeoman Shield products were again chosen as part of the refurbishment of the hospital’s Firth C & D floor corridors.With the need to refresh the interior walls and doors, as well as future proof them from further damage and marking, a variety of products from Yeoman Shield’s range were employed.Corridor doors, which are on the frontline when it comes to impact damage, were fitted out with Yeoman Shield Door Edge Protectors and PVCu clad glazing beads, both in a graphite colour. Contrasting Mid Grey Door Protection Panels were installed to both sides of the doors with vulnerable architrave and framework also protected by Yeoman Shield products.This comprehensive, fire rated, door protection system will extend the life cycle of expensive fire doors helping to keep them in good working order.Yeoman Shield Guardian Handrails in the same colour scheme were fitted along the hospital passageways. Bespoke metal brackets were manufactured by Yeoman Shield to implement the spanning of the rail over pillars though out a glazed corridor.Beneath the handrail 2mm thick FalmouthEx Wall Protection Panels were fixed to offer low level protection. A cream colour was chosen for the panels accompanied by Mid Grey Corner Protection Angles to keep a light and airy feel to the scheme.Pete Trenchard, who specified and project managed the scheme on behalf of Sheffield Teaching Hospitals added “When carrying out improvements and refurbishment of the corridors, in line with the STH standard colour scheme and standard fit out, I was keen to incorporate the Yeoman Shield range of products to achieve a long-term solution.“The specification of Yeoman Shield products on corridor walls, vulnerable corners, doors, frames & architraves, protects the fabric of the corridors without detracting from the visible aesthetic appearance expected of a hospital environment.“I worked closely with the Yeoman Shield team through the design and specification phase, drawing on their expertise to find a cost-effective fit for purpose solution. The site survey and installation offered a start to finish package which has been contributory to the successful and well received outcome of the project”.

The Quadrangle building in the historic heart of Cheltenham, once a 1970s landmark, has been completely transformed into a contemporary mixed-use commercial development featuring exclusively AluK window, door and curtain walling systems.Designed by AWW Architects from their Bristol studio and completed by Beard Construction, it now features an inner courtyard, ground floor retail space, four storeys of open plan workspace and the town’s first rooftop restaurant.The fenestration package was absolutely key to retaining the design language of the original building within a more contemporary aesthetic, whilst also meeting the requirement for improved thermal efficiency, more natural light and better natural ventilation.Having been impressed with the design and quality of AluK products on previous projects, AWW specified a comprehensive mix of AluK systems at the Quadrangle – the SG52 capless curtain walling system to give a frameless appearance to the retail façade, the more conventional SL52 capped curtain walling system for the courtyard area and rooftop restaurant, the GT55 system for the entrance doors, and the tried and trusted 58BW window system for the 400+ windows fitted into the existing openings around the façade.The entire fenestration programme was carried out by AluK fabricator Aluminium Sashes, which used its extensive experience in the repair and replace sector to overcome the challenges inherent in surveying, fabricating and fitting windows into openings which, in many cases, were irregular in shape and form and not aligned with the concrete slab finish.Aluminium Sashes worked closely with AluK at planning and detailed design stage to achieve the contemporary look for the façade that the client and architect wanted. For example, where the original windows had a transom and modesty spandrel panel below, the slimmer sightline replacements replicated the line of the transom but with fritted glass below to provide a similar level of privacy with more natural light. They also designed a solution for fixing the anthracite grey windows to the metallic bronze louvre sections specified to break up the uniformity of the façade, give users the option of manual ventilation and to provide fresh air and exhaust points for the AHUs. The reinforcing bar in the windows has effectively become the carrier bar for the louvres and gives the impression that there are two colours in one window panel.

The Cabin is a stunning residential project in West Wales.Featuring motorised roller blinds, motorised curtain tracks and specialist tensioned rooflight blinds, this project has a little bit of everything when it comes to shading.Being as this was one of the most aesthetically pleasing projects we have ever worked on, it was vital that the shading provided functionality and style simultaneously. Umbra's' wide range of hardware options and powder coating services meant that the blinds and curtains could fit both the interior design style and the stunning scenery flawlessly.Being a modern style, it was absolutely vital that the shading solutions were smart home compatible. Every blind that Umbra fitted was controllable via a smartphone app. This meant that the home owner had complete control over the blinds directly from their phone. With the ability to set scenes, create automatic schedules, and make use of various sensors, (including light, weather and presence detectors) to gain fully autonomous control over their shading.Another unique challenge that the project posed was that of temperature control. The project had the dual challenge of large glazed windows and a costal location, (meaning the weather has the capability to go from scorching heat to vicious gales at the drop of a hat). Specialist fabrics were selected from Umbra's very own fabric range to provide optimal heat gain and loss control.All of these factors came together in perfect harmony to create one of the most visually pleasing and functionally robust projects Umbra have completed to date.

INNOVATIVE OFFICE INSTALL CREATES STYLISH AND SUSTAINABLE SPACE Forbo Flooring Systems’ Allura Luxury Vinyl Tile (LVT) range was specified by design and fit out company, Oktra, to transform an office building into a stylish and modern workspace. It was also installed adhesive free using IOBAC MagTabsÒ, to help achieve Akoya’s sustainability requirements.  Oktra were recruited by Akoya and Brunswick Property Partners, to repurpose an office building to create a vibrant and attractive space for young professionals and entrepreneurs to work in. Formally known as Knollys and Stephenson House, the building will be rebranded as Mosaic East, a comprehensive refurbishment of one of East Croydon’s most iconic office developments.  Typically, carpet tiles or exposed raised access flooring are the go-to solution in these scenarios, however with a premium design required, Oktra opted for something different, as Danielle La Porte, Designer at Oktra explains: “Akoya wanted to create a range of category A office suites that would be memorable to tenants, while also meeting sustainability requirements. With this brief in mind, we specified Forbo’s Allura Flex LVT, which is available in range of elegant colourways and wood effect designs – perfect for this project! “We wanted to add some brand identity within the category A suites, so we decorated some of them in a light pink colour with linear LED lighting, and other suites in a light sage green colour. To complement the colour palettes, we chose Allura Flex LVT in the Light Honey Oak shade. We then asked the flooring contractors, The Commercial Flooring Company, to install the planks in a beautiful herringbone pattern to really enhance the aesthetics of the space.” However, appearance wasn’t the only area of concern, with Akoya also conscious of the sustainability requirements. Danielle addressed this, saying: “The aesthetics of the flooring weren’t the only thing we had to keep in mind, we also had to ensure that whatever floor covering we specified would meet Akoya’s sustainability aims. It was for this reason that we specified Forbo’s Allura Flex, as it can be easily installed adhesive free, using IOBAC MagTabsÒ.” IOBAC’s innovative MagTabsÒ provide a two-dimensional hold, with one side being magnetic and the other a dry-tack adhesive. This means they can be easily magnetised onto metal raised access flooring, like those at Mosaic East, and the chosen flooring simply placed on top, negating the need for traditional adhesives. Ian Spreadborough, Founder and Director at IOBAC explains further: “Our MagTabsÒ essentially allow flooring contractors to quickly place floor coverings down onto raised access flooring, without damaging the substrate or the flooring itself. The phrase we use is ‘hard to shift, easy to lift’. The idea is that the flooring is securely fitted but can then be lifted back up to be reused elsewhere, or simply be replaced by another floor covering further down the line. “Oktra approached us as they had used our MagTabsÒ on a previous project and had been extremely impressed by their performance, so were keen to use the product again. Additionally, Forbo’s LVT and carpet tiles are approved for use with the MagTabsÒ, making it the logical choice. On top of this, Brunswick, who own the raised access flooring itself, were keen to maintain the condition of its asset, so, the tabs served a double purpose, protecting both a heavy carbon embodied asset, in the raised access flooring, and Forbo’s floor coverings.” Jon Cochrane, Director - Asset Management & Sustainability at Brunswick Property Partners, commented on the use of IOBAC’s MagTabsÒ, saying: “Cleaning adhesive residue off sub-floors in between leases is often messy, expensive and time-consuming. In some cases, the raised access floor panels are so badly contaminated that they must be completely replaced, something which isn’t sustainable, environmentally or financially.  However, using IOBAC MagTabsÒ to install floor coverings removes this issue completely. This means that our asset, in this case the raised access flooring, is protected and kept damage-free for longer-term usage.” It wasn’t just the sustainability benefits that drew Oktra towards MagTabsÒ, with the installation benefits of the tabs also a deciding factor. Daniel Hassan, Operations Manager at The Commercial Flooring Company, commented on this, saying: “Thanks to IOBAC’s MagTabsÒ, it took a team of three fitters around five days to install 900m2 of flooring in a herringbone pattern, which is challenging to install and would have taken much longer to do through traditional methods. This provided a great time saving and allowed the other trades to work around us whilst we fitted the flooring.” The time saved during the installation stage meant the project as a whole was able to be completed in just 10 weeks, a quick turnaround for such a large job. Danielle concluded: “We’re really happy with the finished project, as are Akoya; the flooring looks amazing and we’re delighted to have been able to get it fitted so quickly, as well as meet Akoya’s important sustainability aims.” To find out more about Forbo’s offering for office spaces, please visit: www.forbo-flooring.co.uk/offices.To find out more about using IOBAC MagTabs, please visit: Adhesive-free Flooring Installation System - IOBAC MagTabs® | IOBAC | NBS Source (thenbs.com) 

This work at Holborn’s Chancery House  — The Office Group’s largest location to date spanning 127,000 sq ft — focused on a design that accommodates multiple working zones and breakout spaces, enhances wellbeing and offers an abundance of natural light.Radii’s design department provided multiple bespoke solutions for this fit out, working on four of the building’s nine floors.For glazed fronts, our elegant Parallel 50 (Rw 45 dB) double glazed partitions in emulated satin stainless steel finish — a reference to the historic London Silver Vaults that are located at the base of Chancery House — were utilised along with wraparound framing and a custom blade detail to create an eye-catching visual effect.On the Ground floor, single glazed Linear 59 partitions (Rw 39 dB) with a bespoke pocket sliding door into drywall was installed for platform lift access.Finally, E30 fire rated double doors were placed on the Lower Ground Floor to provide fire route protection.

A MG500 flush glazed sliding folding system completed project in Coventry. Panel profiles finished in a bronzed aluminum to match the project design. Each panel applied with crittall bars and a reeded glass film, these panels make a statement. MondernGlide were involvement in the project via Planet and it’s been a pleasure working in helping with the design and construction works onsite. The redevelopment project was split into 2 different phases. Phase 1 was all about the sympathetic refurbishment of the main B1 auditorium and associated public spaces. It is about retaining and enhancing the historic nature of this space, whilst refurbishing many of the tired and worn finishes and fittings to completely refresh the space The benefit of the MG500 is that we require no structural support within the ceiling meaning this product can be installed anywhere. With the slim back painted border you have clear view visual lines allowing a superior light flow around the office, cost-effective installation, flexibility in the work environment as well as the simple fact that they look elegant and classy.

NORclad have been supplying the timber cladding on this project over the past couple of years, a mixture of Tongue and Groove boards, feature fins, and open rainscreen profile.Areas for accommodation and high footfall required to also receive EuroClass B fire treatment.A HomeGrown Larch was selected for this project, having a fair spread of knots and character to be in keeping with its surrounding, a great example of selecting a suitable timber species that fits. Potentially if a timber with a lower knot content, or less defined grain would not have worked as well as this, in these natural surroundings.With English Grown Larch only being classified as slightly/ moderately durable by TRADA, the decision was made to use a high pressure treatment on all of the timber supplied for this project. NORclad Lite preservative treatment was selected, which allows the timber to naturally weather down to the silver grey as you’d expect from timber after being exposed to UV light, the treatment also offers a 30 year warranty against rot & insect attack.

A large bespoke walk on rooflight from Glazing Vision, split into 20 sections, has enabled plenty of natural daylight into this newly built basement conversion, whilst maintaining their outdoor space.With a mantra of ‘don’t move, improve’ being ever present within the world of today, it is important for homeowners to understand how they can best improve their own home and add value to not only their property but also to their style of living.So, when this homeowner spoke to Goedehuizen Architects, they were keen to understand what could be done to create more space in their home and, in particular, how they could create a new lounge area for entertaining friends. With a lack of space above ground and without removing any garden space, it was decided the best option would be to create a basement extension.One of the common problems when creating a basement extension, is you may not be able to get enough light in and the new room may end up gloomy or always dependent on artificial light. Therefore, to avoid this becoming a problem, Goedehuizen Architects sought out a rooflight option which would enable ample light to enter the basement whilst not impacting on any of the outdoor space.Impressed with his discussions with Glazing Vision Europe, it was decided that the initial concept designed by Maikel Snels, architect at Goedehuizen Architects, could be achieved and would include 3 bespoke double glaze diamond shaped walk on Flushglaze rooflights and a large multi-part walk on rooflight, in a U shape and split into 20 sections.Glazing Vision Walk-on rooflights using Flushglaze technology are designed to be installed flush with external flooring – perfect for flat roof terraces. The multipart construction also allowed the construction beams to become camouflaged within the design.Due to its frameless design the U shaped walk on Flushglaze flat rooflight, measuring 1200mm (span) x 11700mm x 15500mm x 11700mm, was not only able to provide the required natural daylight into the basement, but also created an aesthetically pleasing design that fitted into the garden well and maximised the usable space by enabling the clients to walk on the product.This additional natural daylight has helped to bring new life into the property and showcase a remarkable extension project, which has provided the homeowners with the perfect lounge area for entertaining.“The finished result is really great, we get a lot of positive response on the rooflights. Because of the rooflight the basement is a very light space.” Maikel Snels, Goedehuizen Architects.

F. Ball’s high performance subfloor preparation and adhesive products have been used to renovate the floor of a 160m2 school hall at Christ Church CE Primary School in Kent. A combination of Stopgap 600 deep section base compound and Stopgap 200 Smooth acrylic floor smoothing underlayment was used over a Stopgap Waterproof Surface Membrane, firstly to build up the subfloor to the required thickness and then create a smooth, durable surface on which the final floorcovering could be laid. Styccobond F46 pressure sensitive acrylic adhesive was used to secure the vinyl Polyflor XL floorcovering to the finished subfloor...

The Chocolate Works is an award winning £50.0m housing project on a strategic site bounded by York Racecourse Conversation Area and the listed Terry’s of York chocolate manufacturers building, both intrinsic to the city’s rich history. The development by David Wilson Homes, provides 320 homes including apartments and family houses. IG’s standard lintels, corner lintels and windposts provide the necessary structural support for bright and stylish open-plan spaces across multiple floors.Challenge:Since the closure of the factory, the unused industrial site had been bought and sold on several occasions. A viable scheme could not be agreed and developed to respond to the local surroundings, complementing and referencing the adjacent Grade II listed chocolate factory.Solution:David Wilson Homes used community involvement at the initial design workshop which gave local people and key stakeholders a voice in the scheme’s design. The layouts of the homes achieved are simple and clear and focus on the demands of the residents for modern and contemporary style living with high ceilings and large windows providing ample natural light.IG’s technical team designed wide inner leaf corner lintels accommodating a range of sizes for ‘The Leetham’ house type for both kitchen and study areas. IG’s corner lintels allowed for flexible open-plan spaces to be suffused with natural light through a clean and minimalistic design approach. All the lintels were supplied with customised steel support posts for each mitred corner and tailored to include factory fitted spigots located in the cavity to ensure that no steelwork was visible, with the post being encased at the corner to achieve the architectural design feature.

Originally an anonymous, almost forbidding, seven-storey office block constructed in the 1980s, York House on Pentonville Road in Islington is being transformed into a contemporary, light-filled co-working space fit for 21st century use.The original building frontage was set back from the road, but the addition of a new five-story front extension introduces an attractive double-height entrance with offices above. Using similar engineering bricks to the main, original building, the new construction allows light to flood in through the use of structurally self-supporting perforated brick lattice, angled at 45 degrees to gain stiffness. A cross-laminated timber structure sits behind while openable windows allow fresh air to circulate.At roof level, a new, cross-laminated timber structure, clad in a perforated zig-zag aluminium screen, echoes the front extension while softening the building edge.The brick selected for the project was a Blue Brindle Smooth – a high quality smooth brick that closely matched the masonry of the original building. The complexity of the lattice work structure required special shapes of brick and perforation to allow visibility through the bricks at the right points. Working closely with the architect, it took the team nine months of developing and testing to get the strength of the product right. Three lengths of brick were produced and used in the construction of the extension: 215s were used in the building of the chevron parapet, 345s were used on the parapet and alongside the entrance, and 440s were used to create the latticework on the main entrance.We are proud to announce that York House was highly commended at the 2019 Brick Awards in the Innovation category and is a great example of a collaborative approach with our customers.

We supplied and installed our Spectrum nylon-coated balustrades with glass infills and Neatdek aluminium decking with alternate inserts on every balcony. Frosted glass screens were also supplied between balconies to provide an element of privacy for the occupants. A spokesperson from ENGIE says, “Neaco offered an excellent service from start to finish. They had the task of designing and installing their product to the existing structural steel which they carried out with very few issues and all modifications were handled by the teams promptly and efficiently, so that our programme was maintained throughout. Overall, the service provided was outstanding”.

Residential DevelopmentWarwick House is an exclusive new collection of stunning interior designed apartments, blending contemporary living with style and sustainability. Surrounded by uninterrupted green views, the apartments are set for completion in early 2023.

The production site was closed in 2009 along with the museum but Alfa Romeo wished to convert the site into a place of memory matching the Group's ambition for this brand coming back. Today, the museum homes the most important collection of cars from the Alfa Romeo brand. Indeed, you can find the 69 car models that have made mark on history of the brand. Barrisol sheet : 815 sqm of translucent blanc Venus sheet with star white harpoon. Profile used : BS 350/01 Lightning : LED strip

This new museum is the result of a close collaboration between Paris and Abu Dhabi, with some Artworks lent by France and a French architect, Jean Nouvel. Jean Nouvel has created a town on Saadiyat island, situated 10km from Abu Dhabi center. Barrisol has also brought its know-how: we can find in kids' area some lightening ceilings and in the VIP room, black ceilings coming from the "Reflets laqués" range of products. Architect : Jean Nouvel

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.

After a prestigious school near Birmingham suffered extensive damage when a leak went unchecked, we installed our award-winning leak detection system to prevent future devastationA tiny leak left to escalate at St George’s in Edgbaston ruined thousands of pounds of property and equipment and left the school without a properly functioning IT department. Leaks within buildings are very common and if not monitored can cause extensive damage, disruption and loss. So, once the school was back on its feet, we were delighted to work with their insurer, Hettle Andrews, to make sure the property was protected against future flooding. St George’s School, EdgbastonSt George’s School is a fully co-educational independent day school for children from ages three to 18 in Edgbaston, near Birmingham. Established as a charitable trust, the school opened in September 1999 as Birmingham’s first independent school to offer a complete education for boys and girls from kindergarten through to the sixth form.We worked with their insurance broker, Hettle Andrews, who facilitated the project. Hettle Andrews works primarily with schools, universities, colleges and charities. In the winter of 2021, the boiler in the room above the IT department of the school began to leak. The school was closed for the holiday period so no one went on-site and the leak went undetected. On return to the school in the New Year, staff discovered the leak which by that point had caused extensive damage.  The leak had not only destroyed the ceiling and light fittings but the whole IT department below including computers, carpets, plug points and furniture. The challengeNo warning: this was the first time anything like this had happened. There were no warning systems in place, nor were there any preventative measures. Extensive damage: the full ceiling had to be replaced, along with expensive light fittings, computers and IT equipment.Inconvenience: it resulted in substantial inconvenience and downtime for the department which in turn affected its daily function within the school.Disruption: the IT department had to be relocated elsewhere in the building, along with any remaining functioning equipment. Time-consuming process: while the damages were being claimed on insurance, the room was cleared and de-humidifiers installed to try and remove any remaining moisture.The solution;Andel Floodline®Andel's unique, award-winning water, oil and gas leak detection and monitoring solution. We are one of the global market leaders in leak detection systems and we knew our Floodline® solution would be a perfect fit. It is a true hybrid that can report to a single integrated control panel – unlike some other systems that require different alarm panels for different types of leak detection.Floodline® covers all possible leak detection requirements, from single-zone to multi-zone and distance measuring systems, with the capability to protect the largest of buildings, both old and new. Floodline® systems allow additional zones, sensors and upgrades to be added easily and cost-effectively so it is future-proof. So, we installed Floodline® SVCP – 2-Valve Control and Floodline® 1-Zone Leak Detection System. This means the school is now able to: Easily monitor all the Floodline® leak detection sensors installedEasily monitor the display LEDs which provide clear alarm information and system status for both leak detection and system faultHave peace of mind knowing the solenoid valve control panel will immediately close two solenoid valves in the event of a leak, ensuring the water source is stopped, preventing any damageBe alerted quickly as there is an audible alarm with a mute functionBe alerted when away from the property as output relays connect to a GSM communicator which sends out an SMS.The result;Bespoke solution: we were delighted to be able to come up with a tailored solution for St George’s School. Early warning: the boiler room at St George’s Edgbaston is now equipped with a bespoke leak detection system that will give early warning should there be any escaping water detected.Confidence: the client feels relieved and more confident now that our leak detection systems have been installed. Peace of mind: knowing they will no longer have to worry about leaks especially when there is no one on-site. Futureproofed: the school knows their chances of this occurring again and their building and equipment being unprotected have now drastically dropped. Community: as schools are the hubs of most communities, the last thing we want is for their day to day operations disrupted by escaping water, something which can be detected early and solutions provided easily. We are proud to have been involved in this project alongside Hettle Andrews and hope to work with more of their clients in future to provide proactive solutions.What the customer said;“We are relieved and more confident now that our leak detection systems have been installed. It has given us peace of mind, knowing we no longer have to worry about any leaks going undetected and resulting in catastrophic damage. The chances of this occurring again, meaning our building and equipment is unprotected, have now drastically dropped. We are really happy with the services and products provided by Andel and would happily recommend them.”Patrick Ryan, Maintenance Manager, St George’s School

THE PROJECT: Recticel supplied the high-performance thermal solution to transform a 100-year-old property in Moseley, Birmingham. Divided into nine apartments, in which two were refurbished to create one, two-storey home, the project caught the attention of the producers of Channel Four's Old House to New Home. Connecting a ground floor property to a flat above led to the creation of a modern and stylish home trimmed with decorative reminders of its structural origins.THE SOLUTION: Eurothane® GP, a high-performance rigid PIR foam board, was selected for the new home's pitched roof, framed wall and floor. Eurothane PL, Recticel's insulation and plasterboard solution was fitted to the property's existing, cavity-less, nine-inch exterior brick walls. The well-sized board ensures minimal thermal bridging during construction.Coupled with Eurothane® GP's 0.022W/mK low thermal conductivity, these products were crucial to attaining a good U-value rating. In total, 130m2 of Eurothane® GP and Eurothane® PL panels were installed.The homeowner, Paul explained:"As we were carrying-out most of the building work ourselves we wanted the best possible insulation for the project. Research revealed Recticel's solutions fitted the bill. Excellent thermal performance and simple to-fit, they were a far superior alternative to other insulants we considered. The panels have done so much to create a welcoming and comfortable interior environment."Used products:Eurothane® GP:Eurothane® GP is a high performance PIR insulation board that is light weight, easy to cut, handle and install. Whether it’s a pitched roof, framed wall or floor, Eurothane® GP is the ideal solution amongst contractors and installers.Eurothane® PL:Suitable for mechanical fixing or dot and dab fixing, this insulated board is consistently sized with extremely tight tolerances, ensuring thermal bridging is minimised. Factory bonded, the plasterboard provides optimum board dimensions and optimum adhesion between layers.

CABI, the Centre for Agriculture and Biosciences International, have moved into their brand new bespoke global headquarters for the organisation in Wallingford, Oxfordshire. Sitting in an area of outstanding natural beauty, this unique office development by architects, Scott Brownrigg, has been built with a low impact design and a strong emphasis on low carbon. The complete development incorporates energy-saving measures above current Building Regulations standards.  Whilst the outside of the building has been designed to be unobtrusive, allowing it to blend into its environment, internally the design has certainly been given the wow factor.  Rooflights allow natural light into the building, which continues to flow throughout by clever use of Lusso Atria glazing and Lusso 25 single frameless glazing. The glazed atrium has been installed with stunning affect and glazed partitions provide a 2,500sqm of workspace which incorporates a café restaurant, meeting rooms, and conference room/auditorium. This state-of-the-art headquarters is certainly fitting for an international organisation which will be visited by both guests and staff from around the world.     

Working in close co-operation with the building envelope and façade contractor Colorminium, Metalline have produced a range of bespoke 3D twisted fins that will when complete take centre stage on the exterior of the redeveloped Minories Hotel in the City of London. This stunning feature was the brainchild of ACME architects who in collaboration with The Murphy Façade studio have designed a series of full storey aluminium fins that clad the existing precast frame and create a bridge between that and the unitised glazing. Fabricated offsite at Metalline’s state of the art manufacturing facility in Cannock, these 42 metre height fins were produced in 3.5 metre lengths with a depth of over 800mm. Manufactured in 2 parts, each element was assembled using a combination of aluminium stud welding and bonding techniques developed by Metalline. The fins were then fitted to the glazed panels using an aluminium bracket support system to ensure structural integrity. Finished in dark and light bronze PPC to mimic an anodised effect, the fins will create shading for the hotel’s occupants as well as an iconic architectural vista for this stand out landmark project.

Privacy glass on a balcony is becoming a more frequent request. This installation by AC Fabrications in Cornwall on a domestic property perfectly displays how a glass privacy screen can be used. The partially frosted glass increases privacy for those on the balcony, people at ground level will not be able to see them. The non-frosted section allows the residents to enjoy their view from the privacy of their balcony. Taller glass on one side extends the privacy even more, and also will act as a windbreak. Frameless glass balustrade is often used as a windbreak on balconies, the solid pane of glass protecting those on the balcony. The installer has used POSIglaze base fit Silver brushed channel. Designed to provide the greatest possible adjustment opportunities, this system enables each panel to be perfectly aligned during, or even after, installation. POSIglaze is the perfect choice for residential to light commercial installations where up to 1.5kN frameless glass balustrade is required. This innovative patented and market leading screw-clamp technology locks glass panels into position effortlessly, with four immobilising fasteners per meter of channel. 

Now reimagined as The Edinburgh Grand, the formerA-listed RBS head office built between 1938 and 1942 is animpressive building situated on St Andrew Square. With manypieces of Victorian antique brass and pewter ironmongeryand hundreds of original period doors throughout, theironmongery solution had to accommodate the traditionalaesthetic and be fit for the many demands of a modern hotel.Allgood was commissioned by the project’s architect andinterior designer, both long term partners of Allgood; KarenBrown of Chris Stewart Group and Eirini Christodoulou ofMorgan McDonnell. With such a striking, but unusual finish,finding coordinated hardware was a challenge. Severaloptions were assessed before settling on a brass finishapplied to the Allgood door closers, cylinders and joinerysubcontractor’s hinges.A collection of classic Frank Allart handles was chosen for allapartment front doors, which also integrated with the hotel’saccess control system. To match the patina of the agedhandles, a satin nickel-plated surface was given a light bronzefinish to produce an aged nickel silver appearance. Thisunlacquered, ‘living’ finish, will oxidize and patinate naturallyover time.

Ikoyi is in a class of its own, not just in the culinary arts but also in interior design. Danish designer David Thulstrup uses Baltic architectural mesh from GKD for the expressive spaces of this 2-Michelin-starred London restaurant.The visionary founders of Michelin-starred restaurant Ikoyi, head chef Jeremy Chan and businessman Iré Hassan-Odukale, moved into the concrete complex “180 The Strand” close to Covent Garden at the end of 2022. The two partners succeeded in getting the renowned Studio David Thulstrup from Copenhagen on board for interior design. Thulstrup’s works include the design of Noma in Copenhagen, which has been crowned the best restaurant in the world no less than five times.For Ikoyi, Thulstrup created rooms that fully live up to the reputation of the landmarked, brutalist architectural character of this former office complex. With its rare combination of warmth and minimalism, the restaurant’s interior acts as a continuation of the food creations by Jeremy Chan.It should be noted here that in Chan’s kitchen, he not only pays attention to top-quality, sustainably sourced ingredients. His cuisine also builds on spices that originate from West Africa. This is not inconsequential in the context of the architecture, as the interior designer wanted to pick up on the character of the cuisine in the dining room of Ikoyi without limiting the design to a specific culture.Copper, stone, stainless steel meshThe result shines in clear and strong architectural forms, while the material palette is refined to copper, stone, stainless steel mesh, leather and oak. The walls are clad in copper panels. Sometimes angular and solid, sometimes rounded and open, the walls shape the character of the room. The stone floor is elegant and cooler, its gentle irregular shimmer evoking images of the tamped earth floors of traditional old buildings. The ceiling covering, which is fully fitted with stainless steel mesh from GKD, creates a similar effect. It harmonizes perfectly with the architectural idea that Thulstrup describes as an interplay of opposites:“A room full of drama and peace. A room that remains true to the place and yet is not anchored in a particular culture.”Curved ceiling characterizes architectureThe character comes through most strongly in the dining room. Fabric panels spanning the room curve down on one side to meet the backs of the benches. The architectural mesh is a striking element in the design of the room. It underpins the intimate and protected atmosphere, while appearing light and flexible. Thulstrup also uses the weave structure to create subdued lighting effects.The ceiling is divided into 13 panels of GKD Baltic mesh, each approximately one meter wide. The length of the panels varies between 6 and 11 meters depending on whether they also serve as a vertical curtain down to the seats or end where they meet the vertical wall cladding. “The fabric diffuses the light as though it were another culinary ingredient,” says Marc Alonso, Architect and Market Manager for Northern Europe and UK at GKD. “Because our stainless steel mesh is completely recyclable, it also fits with the head chef’s sustainable ethos. This is a project in which our fabric is perfectly integrated into the whole by creating harmony and contrasts in juxtaposition with the other materials,” explains Alonso. That’s what the jury of the Wallpaper* Design Award 2023 think too: they awarded Ikoyi best restaurant of the year.

Project: Creative Centre, York St John UniversityClient: Tate+Co ArchitectsScope of project: Design and supply 24 bespoke-sized rooflights for the roof of a triple-height atrium to fit within apertures in a glulam timber grid.Products: 24 bespoke sized em.glaze rooflights, some with concealed actuator smoke ventsThe ChallengeThe roof of the striking 14m, triple-height atrium, which forms the centrepiece of the newly opened Creative Centre at York St John University, features a glulam timber roof grid. Architects Tate+Co wanted to punctuate that grid with bespoke sized rooflights to bring even more light into a space which is used as an exhibition, teaching and theatre space, as well as somewhere for students to mix and relax. The rooflights had to have a sleek, minimalist aesthetic, in line with the overall design intent of the atrium and, because almost all the services in the atrium are hidden, needed to be available with matching concealed actuator smoke vents.The SolutionWhitesales designed and supplied 24 bespoke-sized em.glaze rooflights which suited the specification perfectly. The flush-glazed glass-to-edge design of the em.glaze units with flat sealed glass units fitted within a fully welded, thermally broken aluminium frame achieved the lean, crisp look the architects were looking for. The fact that they were also available with fully concealed actuators in the smoke vents supplied by our affiliate business Sertus was an added bonus. All the rooflights were supplied for the project complete with preformed 300mm PVC splayed upstands, which enabled them to be fitted directly into the glulam grid, saving the contractors time on site. They were also fitted with specially coated glazing which allowed for a degree of solar gain and contributing to the low energy requirements of the BREEAM Excellent rated building.‍The BenefitsAs well as the meeting the design specification, Whitesales’ technical team helped to ensure that the em.glaze rooflights could be installed quickly and efficiently by the main contractors Kier Construction. We estimate that our recommendation to supply the units with preformed 300mm PVC splayed upstands saved the roofing team at least two weeks on site because they didn’t have to construct the upstands themselves and the integrated splay made waterproofing the roof a lot easier. Tate+Co Director Andy Baker-Falkner is delighted with the em.glaze units: “We liked the lean, crisp design of the Whitesales em.glaze units, particularly with the clean white reveal and option for fully concealed vent actuators.”

BH2 is a £30m development creating a newly-constructed leisure complex in Bournemouth  •  Originally a two acre NCP car park and bus station, main contractors Vinci has built a new 10 screen Odeon Multiplex cinema, café, casino, restaurant and retail complex.  •  Structura was appointed to design and supply Kalwall translucent facades to enclose the external fire escape routes around the perimeter of the building.  •  Structura installed multiple Kalwall translucent elevations, totalling over 1000m2, providing natural daylight to internal areas by day and a soft ethereal glow which brings the area to life at night.The SolutionPanter Hudspith Architects replaced the original curtain wall and specified Kalwall® for the front elevation. Unusually, this unique translucent cladding is fitted with a tight 150mm wide grid, known as Verti-Kal™, which not only serves to emphasise height but is the first of its type in the UK. On this scheme the Kalwall panels also insulate to 0.78 w/m2 making the building eye-catching and sustainable.Unlike conventional glazing, Kalwall eliminates shadows and glare and the stark contrasts of light and shade. The system also enhances simplicity by eliminating the need for blinds, curtains or solar control. Even on cloudy days, the interior is bathed with natural daylight, which means less artificial lighting and, because Kalwall is highly insulating, energy costs are reduced.Kalwall is increasingly being used in the UK for new buildings and also for the refurbishment of cladding or rooflights on aged buildings. One of the main attractions of specifying Kalwall is its unique effect on both the interior and exterior. Although translucent, it offers the big advantage of privacy while the elevations appear crisp and simple. When illuminated at night they emit an inviting ethereal glow.The CommentsArchitect James Jeremiah comments, “This is the first time we’ve specified Kalwall and it fulfils our vision of retaining the modernist characteristics of the building. One of our original concepts for the building was of a zoetrope (one of the earliest forms of moving image) and there’s a strong history of using transparency in films with people moving behind the shadows. We felt the Kalwall system was a very good fit for what we wanted to achieve”.Amanda Birch, Technical Editor Building Design writes, “To appreciate fully the building’s transformation, it is best viewed from the street. The concrete structure has been retained along with its striking line of concrete columns, which are now a strong feature of the front elevation. The original coloured insulated glass panelled system has been replaced at first and second floor levels with Kalwall’s 75mm thick insulated cladding system creating a dynamic façade that is particularly effective at night.

After almost 30 years, Bellway Homes has relocated to a new purpose-built headquarter office building. Based in Newcastle Upon Tyne, the company have settled into the newly formed energy- efficient Airview Park adjacent to Newcastle Airport.  The company were previously based in a small, listed property with cellular offices that were no longer fit for purpose. With light and spacious open-plan office space, the move was the perfect opportunity to support the company’s growth.  The facility houses 100 staff members and include high-spec welfare facilities including a gym, breakout room and a roof terrace. The state-of-the-art office space also features a new training hub providing educational facilities for Bellway Academy. Benefitting from a rich landscape setting, the overall design concept was to create a ‘Pavilion in a Park’. With this in mind, the external design was equally as important as the building itself. Various Tobermore block paving and permeable paving products were used. The hard landscaping featured Tobermore’s award winning paving product Braemar. The premium product fulfilled both aesthetic and design aspirations. 

PROJECTCentral library in KAP 1, Düsseldorf [DE]COMPLETIONNovember 2021ARCHITECTSchrammel Architekten Stadtplaner PartGmbB & RKW Architektur + [ Düsseldorf ]LIGHTING PLANNERBartenbachPRODUCTSRectangular metal panels with torsion springs as a special version of S4.7 K-TS0.96 mm thickness of aluminium [DUROPLAN A], dimension [L x W] 1396 x 353 mm [approx. 400 m²]More than 135 years of history, always changing with the times: The municipal libraries in Düsseldorf can look back over an eventful time. At the end of last year, to reflect changing requirements, the central library in the KAP 1 cultural centre opened its doors on Konrad-Adenauer-Platz 1.Located directly in front of the railway station, this library extends across two floors with a total surface area of about 8000 m², attracting visitors young and old to browse, learn and linger.The ceiling design for the rectangular vestibule area presented a particular challenge to the renovation of this former postal service site. This called for a product that delivered precisely fitting angles while also bringing sufficient daylight into the library. An optimum daylight solution was provided by durlum.Made of highly reflective aluminium, these visually prestigious panels direct daylight effectively into the interior, contributing to the feel-good factor for visitors. The easy-to-install sprung system can either present a seamless appearance without joints, or can provide contrasting accentuation with visible joints. It was therefore possible to highlight this uniform ceiling pattern with joints 13 mm in width for light integration. There are also no obstacles to any revision work that may be required. The panels are quick and easy to swivel downwards and remove. Here, the position of individual elements is defined by the indexed mounting.

The Pyramids Centre in Portsmouth has had a new lease of life with a £2.5m makeover. The ageing facility is now a modern leisure complex offering a fun attraction to the local families. The new facilities include a state-of-the-art gym, trampoline, and soft play park.Helmsman was sub-contracted to supply the lockers and cubicles package providing a turnkey solution to create a modern and sharp changing room area with a comfortable feel.For the Pyramids Centre leisure project we manufactured, delivered, and installed modern laminate lockers of 3 and 5 doors. They are heavy duty and suitable for a wet environment. A row of three-compartment lockers have an integrated cantilever seat stand matching the Abet Walnut (616) laminate lockers and cubicles. The integrated seat stand on these lockers is a great space-saving solution and is perfect for this area.The front line cubicle range fitted the requirements for the toilet and shower cubicles, installed alongside the lockers. The Walnut laminate runs throughout these changing rooms as one of the dominant colours. The cubicle partitions are in Abet Light Grey (478) to separate each cubicle and bring light into the space to complement the rest of the interior.The vanity units and timber integrated plumbing system (IPS) panels are also manufactured from the matching laminate. The IPS in the toilet cubicles are the same colour as the partitions, giving a natural flow throughout. The wall to floor benches and free-standing benches are in Walnut laminate colour as laminate slats are perfect and protected in the wet areas.Most importantly Helmsman has a dedicated and experienced in-house design team supported by its on-site factory. From the outset, we bring a combination of skills and creativity to influence our clients’ decision-making to ensure that concepts turn into reality. From start to finish, we are committed to providing high standards and exceeding customer expectations.

Part of the University Hospital Southampton NHS Foundation Trust, Princess Anne Hospital opened in 1981 and is known as a centre of excellence for maternity care. Providing specialist care for women during pregnancy, as well as genetics and breast screening.Project Year: 2023Product: ASSA ABLOY SL500 FrameArchitect: Strata DesignClient: West End ConstructionProject Background: During the first wave of Covid, a piece of art named 'Game Changer' appeared at Southampton Hospital, this was a gift from Banksy to thank the 14000 staff members, as well as honour the work of NHS workers everywhere. The canvas was auctioned to raise money for NHS charities and organisations, raising a total £16.8m.Part of these funds have been used to improve the facilities, and this is where Landscape Architects Strata Design and West End Construction were engaged, to design and build a rooftop oasis for all the hospital staff, to have a place to enjoy and unwind.Solution: Working collaboratively and having surveyed the site where a window was to be turned into a door, FAAC Entrance Solutions proposed a framed SL500 bi-parting sliding door, in order to both maximise the opening width as well as keep the natural light into the building. Being a staff restricted area, access control was also a must, so this was integrated with existing staff passes to facilitate swipe access and with our QFlow traffic light system which regulates occupancy. The SL500’s framed system is a robust resilient door, making it perfect to manage high volumes of traffic as well Southampton coastal wind loads. Additionally, with its thermally broken profiles, additional tight-fitting brushes, it will contribute to keeping energy costs down in comparison to slimmer or manual door entrances.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

A great example of 1930s Art Deco architecture, The Douglas Building sits on Great Titchfield Street in London’s West End. Formerly known as The Media Village, Douglas House was acquired by serviced office providers The Office Group (TOG) from landlords The Langham Estate in 2019. TOG together with Note Design Studio transformed the building with a colourful concept that blends the distinctive 1930s features and gives a sense of fluidity, openness and light throughout.As its former name suggests this area of London is a hub for local media and IT businesses operating out of the West End and the brief for the building was to create a flexible workspace where people can feel stimulated by their environment leading to greater productivity. Wellness was also a central focus and the building includes an oxygen room, a parents’ room and a roof terrace which are all integral to enabling and inspiring everyone who enters.Well ventilated and an abundance of natural light have become buzzwords in the COVID era and the more than 300 new steel windows from the Clement EB24 range which were chosen by office fit out and refurbishment contractors Parkeray perfectly facilitate both. Polyester powder coated in Pure White and furnished with Warren handles in a satin chrome finish the windows lend the building a contemporary look on the outside as well as supporting the 21st century ways of working inside.Peter Clement, Chief Executive of Clement Windows Group, commented:“As with all prestigious window replacement projects of this magnitude Clement took part in a competitive tender process. Whilst this was in play we understand that both Parkeray and the client’s team had the opportunity to compare our EB24 steel window to others being considered. We believe it was the quality and overall finish of EB24 combined with an attractive price and fine references that convinced them and the client to proceed with us.”

The Royal Shakespeare Theatre in Stratford-upon-Avon has undergone an ambitious and exciting £112m project to install a brand new auditorium inside the skeleton of the art-deco original. The internal refit created some interesting acoustical challenges. One of the most important aspects of the project was to ensure that theatre performances were not disturbed by noise from other parts of the building. In particular, the gantry – from where scenery changes and lighting are managed – was identified as requiring a specialised acoustic solution, to stop the noise of people working behind the scenes from carrying through to the audience. This is where CMS Danskin stepped in.The SolutionAs soft flooring subcontractors on the project, Loughton Contracts installed CMS High Impact Mat in the gantry. Composed of reclaimed rubber, EPDM granulate and PUR binder, CMS High Impact Mat is a durable, environmentally friendly type of floor covering that reduces excess sound, prevents unwanted noise and has excellent impact reduction. CMS High Impact Mat is available in a variety of thicknesses and colours. Simple to install, LoughtonContracts fitted 573m² of blue, 10mm thick CMS High Impact Mat onto wooden, concrete and screeded floor areas in the theatre gantry. As a non-reflective, slip and tear resistant material that meets the highest safety standards, it provides a safe surface for an area of the theatre where there is constant movement of scenery, people and heavy lighting.CMS High Impact Mat also has other qualities which made it the preferred specification for this refurbishment. As well as providing high acoustic performance, it offers an aesthetic, ‘final floor finish’ which is warm underfoot and has anti-fatigue properties. It creates an attractive, comfortable and quiet working environment in the gantry, as well as contributing to the quality finish that runs throughout the theatre.

High-quality and durable KEUCO bathroom fittings in the Waldkliniken Eisenberg in Thuringia.A hospital with a quality of stay at a five star level - the Waldkliniken Eisenberg in Thuringia is changing the German hospital landscape with their new concept. And that quite visibly: "Future was built" with the spectacular new building. The round floor plan of the new building offers each patient a view into the nature from their bed - a central aspect of the design. Every patient from all health insurance categories is welcome. Of the 246 patient beds, only 13 are for private patients.In addition to a new care concept and an outstanding special design, the patients and guests in Eisenberg also receive first-class furnished rooms: The soft, natural colours used for the interior decoration radiates tranquillity and cosiness.Regarding the furnishing of the bathrooms, value was set on durable quality and the decision was made to use complete KEUCO bathroom furnishings. So everything matches perfectly. Fittings, accessories, light and cosmetic mirrors, washbasins and washbasin boards from KEUCO convince with their strong design and easy handling. The IXMO fittings in the shower and on the washbasin are custom-made: As a special highlight, they feature an oak leaf, the Eisenberg logo.The new building was designed by the world-famous Milanese architect Matteo Thun. "Only who dares to do something new and crosses borders, can experience new knowledge". This is Matteo Thun's driving force. Together with the managing director of the Waldkliniken Eisenberg, David-Ruben Thies, Matteo Thun developed this exceptional architecture for his first hospital building, which is completely focused on the patient or guest.Matteo Thun worked closely with the architectural office HDR for the combination of form and function, design and the requirements of a modern clinic. The new building of the Waldkliniken Eisenberg offers patients and guests a harmonious environment for their treatment and recovery phase in the midst of the most beautiful Thuringian landscape.The bathrooms are all completely equipped with KEUCO products and offer the patient or guest a pleasant stay rounded-off with small special features. The movable arm of the iLook_move cosmetic mirror is very flexible. Height, distance from the face, tilt and lateral angle can be optimally adjusted at a single grip. Offers storage space and is easy to clean: the KEUCO washbasin with a washbasin board.