"fire door"

A four-storey underground car park needs to meet enormous fire protection requirements. Preventive fire and smoke protection and fully functional escape routes and emergency exits were top of the list when planning the doors and barriers. T90 fire and smoke protection doorsets were used for highly frequented areas with a higher risk of fire and the gallery and escape routes between the individual fire compartments were fitted with single and double-leaf T30 doorsets with round glazing. Access points to the individual levels were equipped with T30 sliding doors and T30 sectional doors.

West Lothian Council schools, Deans Community High School and Armadale Academy, are maintained by Bellrock Group under a contractual PPP3 project agreement. Taking on this maintenance management for the two school buildings places the Bellrock management team as the Responsible Person when it comes to compliance to fire safety maintenance which incorporates fire rated doors.With this in mind, Martin Igoe, Senior FM for Bellrock, engaged with Yeoman Shield Fire Door Services when it came to assessing and protecting the condition of the schools’ fire doors with an impact protection system.As a brand name of Harrison Thompson & Co. Ltd. who are a registered FIRAS Warringtonfire (a UKAS accredited scheme for fire door and passive fire resisting products installation) company, Yeoman Shield Fire Door Team were able to undertake a conformity survey of the doors in both schools.This consisted of an assessment of the condition of the fire doors, noting remedial work required to improve the doors functionality, replacement of doors where required as well as noting advisory door protection products that could improve the look, condition and extend the life cycle of the doors by solving impact damage problems.After an itemised quotation for the work had been raised and accepted, Yeoman Shield directly employed fixing operatives carried out the work simultaneously at both school sites simultaneously in accordance to Bellrock’ s programme.Remedial work to both frame and fire doors, replacement doors as well as Yeoman Shield Fire Rated Protection products which were Door Protection Panels, Door Edge Protectors and PVCu clad Glazing Beads were fitted by the accredited teams following best practice guidance.Martin Igoe commented “Having previously used Yeoman Shield on school projects in Aberdeenshire I was more than happy to again collaborate with Yeoman Shield for the Deans Community High School and Armadale Academy.“Their door protection products are great; not only have Yeoman shield re-certified the old fire doors for conformity, they have also extended the life of the doors by fitting a hard-wearing cladding to each. This makes them more durable for the rigours of school life, they look amazing and are so easy to clean.Further phases of the fire door work have been scheduled for later in the year.

In our first in a series of case studies, we’ve invited FireDNA Alliance Partner, Steve Neilson to share his experiences using the FireDNA system to inspect and catalogue 9422 fire doors in three months, on behalf of Mitie, for the Scottish Fire and Rescue Service.The Scottish Fire & Rescue Service is the fourth largest in the world and ensures the safety and wellbeing of the people in Scotland. Operating out of 547 buildings across 357 sites, these centres are managed by the UK’s largest ‘Facilities Management’ provider Mitie.Following several months of discussion between Mitie and the Scottish Fire & Rescue Service regarding the status of the fire doors across their property portfolio, a tender was issued for an extensive fire door inspection and evaluation programme to be undertaken.Having secured the works through competitive tender, we further engaged with Mitie and the Scottish Fire & Rescue Service team. Working through their property asset registers in detail we gained a full understanding of the scope and requirements of the project.Following weeks of detailed project planning and final agreement on the timeline, it was evident that we had just over 3 months to inspect and report our findings on 9422 fire doors across the 357 site locations, and this all had to be done during the winter months of late 2021 and early 2022.In order to deliver on such a tight timescale, absolute dedication and collaboration was required from all parties…the project managers, admin staff and fire inspectors as well as the teams at Mitie and Scottish Fire & Rescue Service. To support this challenging task we armed our resources with a new cloud based system called ‘FireDNA’.We had been approached by FireDNA a couple of years earlier to see if we would be interested in helping to beta test their new ‘Fire Door Inspection and Monitoring Software’, to which we agreed, little did we know at the time that this software would prove invaluable to us further down the line!Deploying teams of up to 10 Fire Inspectors at a time, armed with the new and now completed FireDNA Inspection and Monitoring App, we set about working through the phased inspection schedule.Having been involved in the development testing of the FireDNA software, we had no doubt this system would, increase the speed in which the surveys were carried out, and dramatically reduce the time and effort in reporting the findings. Working closely with the FireDNA software support team, who assisted us in the initial software training, our Fire Inspectors were able to work efficiently and effectively ‘at pace’ through the challenge. The FireDNA App also has ‘LiveChat’ built in so any questions or queries by our operatives in the field were easily and quickly dealt with by the FireDNA team, which meant there was very little downtime during the inspection process.One of the great benefits of using the FireDNA App is that everything is ‘real-time’ so our office-based project managers could immediately see how the inspections were progressing. Once the inspection data and supporting photography was in the system report generation was largely automated and nicely formatted into MS Word and Excel documents.These reports could then be initially shared internally with our remedial work/replacement estimators for accurate cost estimates, who in turn could then produce accurate cost estimates and quotes for the works required as each buildings inspection was completed. This created a very fast, efficient and accessible workflow process for the whole team.FireDNA is not only a fantastic fire inspection and reporting tool, but also initiates the ‘golden thread’ of information, allowing building owners and managers like the Scottish Fire & Rescue Service and Mitie to take ownership of the ‘live data’ in the system, which can easily be updated and shared as each fire door asset is inspected, monitored and maintained year-on-year, which will soon become the minimum legal requirement.FireDNA also enables building owners and facility managers to create status reports for O&M compliance, which can be shared with insurers and the like, as well as appointing contractors and maintenance teams to carry out and catalogue remedial works and new installations, which are all date-stamped and locked into the system.In our view, anyone involved in fire inspections, installations, planned preventative maintenance and asset recording of passive fire products, such as fire doors, doorsets and fire screens should be using the FireDNA system. For duty holders such as building owners, facility managers, landlords and surveyors to make sure the assets they are responsible for are safe and compliant and the data unambiguous and accessible by all that need it, including residents.We believe FireDNA is the best system on the market and anyone who uses it will appreciate not only the time and money savings but importantly how this centralised system improves work standards across the full lifecycle of passive fire products. Steve Neilson – FireDNA Alliance Partner – Scotland

Eurobond designed & manufactured a range of steel fire doors and steel acoustic doors for a leading tech giant.The Gemini Data Centre in Dublin, Ireland, is a fort of protected data; over 10,400 sq.m of space is utilised for cloud connectivity and leading technology providers, comprising of 6 individual data halls and ancillary services.All this data needs protection - that's where we helped. We provided fire-rated doors, acoustic security doors, and radar-operated automation doors.Protection of data and people was key, along with minimal noise and easy yet secure access throughout the complex.

The recently renovated 'schloss Colditz' in Saxony, Germany is a great example of how to reconcile the often conflicting demands of historic preservation and fire-protection. The renovation has not just fulfilled fire-protection requirements but the planners have used extremely discreet solutions that fit with historic preservation requirements. Many of the passageways have been fitted with Teckentrup T30 all-glass doors, which combine functionality with aesthetics and maximum transparency.

Doors can be an expensive commodity at the best of times but even more so when they have to be fire doors to conform to RRO regulations in buildings used by the public, such as Schools, Offices, Factories, Hospitals, Hotels and Leisure Facilities.A damaged fire door can render the door’s fire rating ineffective and can be costly to replace.By protecting against damage with Yeoman Shield fire rated door protection products, doors can maintain their performance and look.Click on the short video below to learn more.

WJL Contracts have been providing high-quality, bespoke joinery solutions to some of the largest contractors in UK construction for over forty years. Known for their expertise and design flair, their fire-rated doorsets and panels have been installed in prestigious building projects spanning the education, entertainment, and commercial sectors. They also offer a full installation service which ensures that their fire-rated and acoustic products are installed competently, setting them apart from a lot of other joinery manufacturers. One of these projects was for Crawley Town Hall in West Sussex on behalf of Kier construction. They successfully delivered bespoke joinery and acoustic panelling doors, an elliptical ceiling, a feature wall, mirrors and kitchenettes. The team overcame significant challenges to hit the deadline including managing the installation of 2700 large 2.7m doors.Fire and Acoustic Seals Fire Door FoamTM and Intumescent Acrylic Sealant were used to install all fire-rated doorsets to guarantee their compliance. Joel Mayer, Buyer & Commercial Manager at WJL comments“We’ve been using Fire and Acoustic Seals’ own-label Fire Door FoamTM and Intumescent Acrylic Sealant on our large construction projects for many years. Our team particularly like the Fire Door FoamTM because they think the quality is excellent compared to others on the market, it’s quick and easy to install and it’s backed up by specific fire door test evidence.We also love the service we get from the team at Fire and Acoustic Seals which is why we’ve continued to work with them for over a decade. They’re incredibly reliable and have a fast turnaround service which ensures our onsite team are never without the products they need when they need them. This is really important to us as we are constantly working to tight deadlines.” For more details about this and other WJL projects visit https://wjlcontracts.co.uk/portfolioContact our team for more information about Fire Door FoamTM and Intumescent Acrylic Sealant.0121 521 2179 | sales@fireandacousticseals.co.uk 

Split over basement, ground and three upper floors, the Charles Doll Building on Grape Street, London, offers a contemporary and functional specification in this stunning office refurbishment. The development mixes industrial elements with a crisp modern aesthetic by carefully combining characterful architectural features, including vaulted ceilings with exposed brick and steelwork.Named after its architect Charles Fitzroy Doll, the building is clad in decorative thé-au-lait (“tea with milk”) terracotta – Doll's use of grand façades is understood to have resulted in the expression, ‘all dolled up’. The first floor has been fitted out to a high standard with office furniture from Vitra, providing the perfect space for those who want to move in and get straight to work.The lobby mixes vibrate contemporary wall art with industrial light fittings and brickwork. Forza’s in-house CAD team planned the bespoke black oak Firescreen partition wall to match the architect's design. As a market leading passive fire product, this Firescreen provides both integrity from Smoke and Fire and insulation from heat. This is important because in a fire emergency heat has been shown to ignite secondary fires to items, such as curtains or carpets, that are near the other side of non-insulated partitions.Via the Thinking Space Design & Build, Forza Doors supplied twenty FD30 Fire Doors with stained frames and skirting boards to match throughout the five floors of The Charles Doll Building. Chosen to match the steelwork throughout the development, the dark satin finish of the doors was selected from Forza’s Creato range of dyed veneers. This ‘Illunis’ finish is one of twelve fashionable choices in the range. Dyed veneers are an increasingly popular choice with designers as they offer cost savings over stained veneers without compromising quality.The Doors with glass vision panels, required to allow light through to the stairwells, feature our flush and quirk bead. A minimalist design option where one side of the doors is completely flush right up to the glass vision panel and the other side has a very simple elegant bead detailing.

Replacement fire doors for 46 bed sheltered housing block Clyde Court, situated in Camden, London.Clyde Court, situated in Camden, is a 46-bed sheltered housing block. The first of seven sheltered housing schemes across the borough to be completed, this project included the installation of 115 replacement fire doors, with a further six blocks planned as part of an ongoing programme.The installation was completed by Mila Maintenance & Installation who are BM Trada Q-Mark approved installers and specialists in repairs and installation within the social housing, large scale private rented, commercial building, student living, care home and fire safety sectors.The project saw the replacement of 115 doorsets with Sentry Doors FD30’s (providing 30 minute protection). All FD30’s are independently tested to BS476: Part 22. FD30 and EN1634-1 and dual certified with certification for both Q-Mark Fire Door Manufacture and Q-Mark Enhanced Security for our FD30 Flat Entrance Doors. Each doorset is fitted with a Winkhaus AV2 locking system which means that as soon as the door is closed, automatic locking takes place without the need to lift a handle. The locked door can then be open internally by depressing a handle or operating a thumb-turn cylinder.The door designs were a variety of FED11 and FED20 styles and the residents were given the opportunity to choose from four colours. The selected ironmongery was Polished Chrome which complemented the chosen paint finishes. These styles were fitted to the front of their properties and the adjoining bin stores. Additional doors were fitted to stairwells and other communal areas.Speaking about Sentry Doors, Mila Maintenance said:“We all know that the installation of fire doors is a highly specialised field of operation and our teams are all fully trained and accredited to carry out their jobs on site.”“What is equally important to us is having a supply chain partner that we can truly rely on. Across all the sectors we operate in reliable and robust supply chain partners are critical to enable us to deliver the outstanding service we demand of ourselves, and which our clients and their residents also rightly demand.”“In such a critical field as fire safety, where people’s lives are literally at stake, it is even more important that we have a supply chain partner we can rely on, both in terms of delivery, and in terms of the quality and high level of compliance of their product. Sentry Doors fit that bill.”

A stunning design by architects Townscape, Peter O’Sullevan House is located at the front entrance of the British Racing School in Newmarket. It provides the horse racing community in East Anglia with a local specialist facility for treatment and training. The facility incorporates a hydrotherapy pool, gymnasium, treatment rooms, changing rooms, conference room, offices and meeting rooms. Forza Doors supplied high dB acoustic American White Oak veneer fire doors and solid American White Oak frames as well as Class 0 spread of flame fire-rated wall cladding panels. All the veneers were laid horizontally to match perfectly down the length of the corridors and open spaces. The feature grooves embedded into the doors provide a smart contemporary look and align with the adjacent panels.  As this innovative building needed a high level of internal finishes and fittings throughout, the contractor RG Carter chose Forza Doors. Just one of several jockey rehab centres we have had the privilege to supply in recent times. Consisting of open plan areas, treatment rooms and hydrotherapy zones, the finished project looks stunning.  

Coopers installed FireMaster fire curtains with smoke control over the lift door openings on each of the ground and upper seven floors and two on the basement so a total of forty eight curtains. An important part of the design of the building on the ground and first floor was to subtly integrate the fire curtain headbox and side guides into the lift opening.

After carrying out a fire door survey, Warwick Hospital undertook measures to protect and refurbish the fire doors throughout their sterilisation unit with Yeoman Shield door protection products.Catering for the sterilisation requirements for all wards and departments within South Warwickshire NHS Foundation Trust as well as GP surgeries and clinics, the department is a hub of activity. The movement of heavily laden trolleys and equipment around the unit had caused impact damage to the department’s doors around door edges, glazing beads and the door fronts. Damage to these particular parts of a fire door can render it unfit for purpose.In this instance Yeoman Shield fired rated door protection products were used to refurbish and then protect from further impact damage. Door edge protectors were fitted to the leading and meeting edges of the doors with door protection panels installed to a height that would shield the most vulnerable areas.For additional protection, particularly to ward off blows to the glazing bead section of the doors, Yeoman Shield’s rub rail was fitted to the face of the door just below the vision panels. Colours of Blue and Red were chosen to distinguish between the contaminated and sterile areas within the unit.Yeoman Shield door protection products come with current and relevant fire certificates and do not affect the integrity of a fire door when installed but will continue to protect from detrimental impact damage for many years to come.Malcolm Bloxham Reactive Supervisor commented “We have used Yeoman Shield for many years and find their door protection products perfect for maintaining our fire doors in good working condition, helping to reduce our door maintenance costs by minimising repair and replacement requirements.”

The FM company of a large Yorkshire Hospital engaged with wall & door protection specialists, Yeoman Shield, to resolve the unsightly and problematic damage that was occurring to fire doors in a busy specialist unit.Such damage, caused by the everyday passage of people, trolleys and equipment, if not attended to, may have become detrimental to the functioning of the fire doors.Yeoman Shield were able to provide a comprehensive fire rated door protection system, which when installed does not affect the fire integrity, to help combat and break the damage cycle, helping to prolong the life of the doors.Door Edge protectors, either FD60 or FD30, according to a doors rating, were installed to the vulnerable leading and hinged edges of the door to prevent chipping and splintering and helping to maintain the recommended 3mm gap between doors and frames.The leaves of the doors were covered with Yeoman Shield’s 2mm thick FalmouthEx protection panels at either full or half height dependent on where the impact was more prevalent, preventing dents or holes from manifesting in the future.Standard glazing beads were replaced with PVCu clad units, complete with corresponding intumescent strip, helping to protect an element of the door much prone to damage.A further part of the fire door refurbishment project was the addition of an Architrave and Stop Lath protection system. These systems come complete with hardwood (stop lath) or MDF core (architrave) with a PVCu cover and as such not only becomes resilient to impact damage but eliminates the requirement for redecoration and repair.Yeoman Shield were able to provide fire certificates for all parts of their fire door protection system offering compliance assurance to the client.For more information on Yeoman Shield cost effective wall & door protection systems go to www.yeomanshield.com or call 0113 279 5854.

About the project:Dublin Doors are a distributor of door leafs to door manufacturers throughout Ireland. Since Brexit, the market in Ireland requires the EN 1634-1 fire testing standard, as opposed to the previously accepted the British Standard BS 476. A customer of Dublin Doors wanted an overhead concealed door closer combined with 44mm thick doors, and it had to pass the EN fire testing standard.The specification of the doors was: (A) 44mm PB hardwood lipped all round door (B) 38mm PB core faced with 3mm mdf, routed with 2mm decorative groove in the faceDublin Doors were very aware that EN testing is widely considered to be more onerous than BS testing. The inclusion of a drop seal was also a point of concern - many companies have found that using drop seals to control smoke can appear to make the fire test harder to pass, with some experiencing prolonged flaming at the threshold. Rutland was able to help by providing its concealed closer ITS.11204, which can be used in 44mm fire doors – one of only a handful of concealed closers on the market that can do this. Rutland was also able to tap into its network of experts and consultants to discuss possible options, to help Dublin Doors to arrive at a combination that met the specification, and was most likely to succeed in the test. Dublin Doors were also required to write a Pre-Test Verification (PTV) before the test – a requirement at many test labs now. Rutland used its expertise in compliance to help complete this specification.The outcome:The results were excellent, with both doors lasting 49 and 51 minutes respectively in the fire test, for what was a 30-minute FD30 doorset, the more onerous European standard EN 1634-1 to achieve – E30. In our experience of fire testing, this is an excellent result for a 44mm solid timber door, and the Rutland team were just as pleased as Dublin Doors that the door, along with its concealed closer, passed with flying colours.

Keen to provide a safe and comfortable environment for their customers, Motorpoint Arena in Cardiff chose Yeoman Shield fire rated door protection products to help maintain and protect the condition of important fire doors.Owned by Live Nation, the concert and event venue receives over half a million visitors yearly resulting in the doors, situated both back and front of house, experiencing damage and unsightly marking from pedestrians and the movement of trolleys and equipment, etc. Not only can this have a detrimental effect on aesthetics but more importantly on the functioning of the fire door.To help protect from such damage Yeoman Shield’s directly employed fixing operatives installed door edge protectors as well as protective push plates to doors in back of house areas such as workshop, cutting room, and boiler cellars etc.Front of house doors, such as the entrances to the auditorium, which experience a huge amount of pedestrian traffic passing through, also had door edge protectors fitted along with half height door protection panels. Vulnerable glazing beads, were replaced with Yeoman Shield fire rated PVCu clad beads completing a comprehensive and durable door protection system that will withstand impact from hands, feet, bags and equipment well into the future.Manufactured from Yeoman Shield’s HessianEx material, the fire rated door protection products were supplied in black for a striking contrast to the colour schemes already in place within the arena.“I was impressed with the standard of work that was carried out by Yeoman Shield’s fixing operatives.“The doors certainly look cleaner and smarter and with the issuing of fire certificate evidence for all the products installed I am confident we will use Yeoman Shield products again.” Commented Marcus.

Stockport NHS Trust runs both community NHS services and Stepping Hill Hospital, which serves people across the areas of Stockport and the High Peak.With the responsibility of the safety and comfort of so many patients and staff, it is important that the trust maintain a high-quality standard within the built environment.When fire doors in the ground floor corridor of the hospital were identified as having minor damage to edges and panels, the trust engaged with Yeoman Shield to provide a solution to stop the damage from becoming a major concern. Left unchecked this type of impairment can lead to the non-conformity and malfunction of a fire door.Yeoman Shield supplied and installed fire rated FD30 Door Edge Protectors to the leading and hinged edges of double swing door sets along the corridor.Door faces were fitted with Yeoman Shield 2mm thick FalmouthEx protection panels, to guard against impact damage mainly caused by the movement of wheeled and motorised trolleys.Now that the hospital’s fire doors have Yeoman Shield protection fitted, the life cycle of the doors will be extended, avoiding the costly task of replacing them.Yeoman Shield door protection products have been fully fire tested to the current standards required.For fire test and product information on the complete range of wall and door protection go to www.yeomanshield.com or call 0113 279 5854.

The Hackitt Review has brought to the broader public attention the myriad of standards and testing or assessment methods that specifiers and the fire protection sector has had to carefully navigate for many years. And whilst the debate continues about the best way forward in respect of specific applications, one positive step that fire door manufacturers can take right now is to go back to basics and check whether their supply chain for fire resisting components is opening the door to risk.Fire resistant products like fire rated glass, intumescents and core materials are composed to precise specifications.

Arguably the most famous department store in the world, Harrods of Knightsbridge is a huge retail concern with over 5000 staff members working in over 70,000 square meters of retail space split into 300 plus departments over seven floors.When Harrods decided to redesign their staff food court they required double action doors that were aesthetically pleasing, had a high hygienic rating and were easy to use and they also needed a double action door with a 120 minute Fire Rating.SolutionDortek Installed Polyethylene doors that could be used as personnel doors. They also allow easy movement of trolleys and kitchen equipment between the three distinctive kitchen areas. Dortek also installed double-action 2-hour fire rated GRP doors into a 2530mm wide structural opening to enable staff to bring in large pieces of kitchen equipment when necessary.

City of London Freemens first opened in Brixton in 1854 for ‘the maintenance and the religious and virtuous education of orphans of Freemen of the City of London’. Paid for by the Corporation of London both boys and girls were enrolled from the outset making it the one of the oldest co-educational independent schools.In 1926 the school moved to Ashtead Park in Surrey. The Grade II* listed Main House at Ashtead Park had been the home of Sir Robert Howard, Chancellor of the Exchequer during the 17th century.In 2016 an ambitious development project was commenced, due to span the next decade. The modernisation of the Main House, now the Sixth Form Centre, involved a redesign of the building and the new layout required fire screens to ensure the building met with current Building Regulations. Clement Windows Group supplied the internal fire rated doors and screens at the top of the adjacent internal stairs which are access controlled and linked into the main fire control of the building.

Abbott Nutrition develops and markets a wide range of science-based infant formulae & medical nutritionals. Abbott nutrition required hygienic door solutions, windows and transfer hatches for its new manufacturing facility. The factory it the country’s fifth facility under Nestle and is considered to be among the company’s most advanced worldwide.  Dortek supplied Fire rated single action and sliding doors across the facility. Their smooth and seamless construction means there are no ledges where bacteria can gather. Our encapsulated doors are hygienic, easy to clean and 100% waterproof. Dortek GRP doors are ideally suited to milk processing areas and have been installed in facilities worldwide.

When the Hong Kong Disneyland Resort was planned, the project included a 7-bay fire / ambulance station which featured a garden style theme to enable the buildings to harmonise with the green surrounding and the nearby Theme Park. Bolton Gate were specified to provide fourteen electric folding doors which included a special green powder coating, Lexan vision panels and faux louvres to each door. In addition, the doors had to be designed to resist typhoon loadings of up to 3Kpa, were manufactured in Bolton and shipped to Hong Kong where they were installed by the local agent Deacon.

A comprehensive fire door replacement programme throughout the 5-storey Ladywell Unit which provides mental health services including a psychiatric intensive care unit.Advanced Timber Systems supplied fully PVC encapsulated ‘Vanta-form’ Door-sets and specialist anti-ligature hardware to give a robust, compliant and durable solution in this complex environment.Glazed Side screens were supplied with toughened security glass to enhance the safety for patients and staff without compromising visibility through corridors.

When we think of the „Elbe Philharmonic Hall“ most of us imagine the impressive silhouette or the concert hall. Hamburg‘s new landmark also has a hotel, restaurant and apartments where high quality interior design is also in evidence. Functionality may not be the headline stealer but the safe use and operation of the building is a key design element for ensuring visitors, residents, suppliers and artists reach their destinations safely and quickly. A walk around behind the scenes shows how the doors interact with the buildings functionality and aesthetic demands.

Specialist commercial refurbishment company Saracen Interiors delivers four floors of stunning Grade A office accommodation in the heart of Watford’s Met Quarter. Early discussion with Forza regarding project floor plans and elevations enabled the Forza team to prepare veneer layons that fully utilised the potential of the species distinctive decorative features and then create panel layout drawings in order that product delivered to site was clearly sequentially numbered for installation. Incorporated in the project joinery component package for Forza were items such as skirting and lift surrounds in addition to mirror frames and IPS panels for “Boutique” style washrooms.

We were approached to design & manufacture a range of steel fire-resistant riser doors and personnel doors for Europe's most advanced data centre, located in Canary Wharf, London.This 8-storey building offers 73,400 sqm of space - they needed simple yet secure riser doors to provide fire protection to the internal ducts, containing all the cabling and plumbing required in a sleek, discreet solution that provided maximum access, performance and safety.Alongside the riser doors, Eurobond designed & manufactured personnel doors that could be electronically controlled to control the access and provide an audit trail of personnel movement.The 2 key elements of this project were the riser doors - and the sheer volume required to cover the 8 levels and the access control requirements that had to be well planned and coordinated by Eurobond, the security contractor, end-user and architect.

Flat Entrance Fire Doorsets at Market Hill Flats – ScunthorpeWorking in collaboration with our installation partner Mila Maintenance & Installation, this local £1m upgrade scheme secured by Ongo Homes saw the replacement of flat entrance doors and communal access doors with new fire doors in three blocks of high rise living accommodation on the Market Hill estate in Scunthorpe.As just one of many investment projects planned over the next few years by Ongo Homes, each block contains 133 individual flats over 19 floors and the works involved installing new fire and security doors to the flats and communal areas on each floor within the blocks.As part of this, we supplied 399 residential fire doors and 57 communal access doors with practical completion achieved in 16 weeks from commencement.Speaking about the scheme, Installation Operations Manager Dean Bradford, Mila Maintenance explains; “as a company we are now very experienced in the installation of these critical safety measures, designed to keep people safe and secure in their homes. A key part of our offering is that we ensure our site teams are all fully trained and that they are managed by BM Trada accredited supervisors to carry out the works”.“It is one of the things that marks us out as a specialist contractor, and one of the reasons why clients can have real confidence in our ability to do the job to the very highest standards”.“We have worked with Ongo Homes on a number of projects previously and we were especially delighted to secure this programme of works through competitive tender, and to get the site up and running as quickly as possible after the award”.Resident Liaison Office, Alison Needham explains why resident feedback is so important.“Collecting the resident’s feedback following the works showed us that they were really happy with the way we worked with them and with the products we installed”.Joyce Wright, a resident from Princess House commented: “The doors are all finished in our block. They make the place look a lot better, they’ve reduced noise outside and the draft that comes in too”.“I feel safe in my home anyway, but these new fire doors definitely make you feel safer. It’s nice to know how important our well-being, and spending money on existing homes, is to Ongo Homes.”Ongo Homes provide 10,000 homes for people in the social housing or affordable rent sector and provide a wide range of property management and maintenance services, plus support services to help people live comfortably and independently in their homes.Speaking about the scheme, Matthew Hubbert, Compliance Project Manager for Ongo Homes, said “Ensuring the highest standard of fire safety is maintained in our high-rise building is of the utmost importance to us, and is something we don’t take lightly. That’s why we carry out regular checks, install safety equipment and make these kinds of upgrades.“Fire doors were already installed at Market Hill as they are extremely important in helping to control the spread of fire throughout the building if the worst ever did happen, but we thought it was time to modernise them.Working alongside our installation partner Mila Maintenance & Installation and client Ongo Homes in a project local to us in order to protect the safety of residents was rewarding;Ty Aziz, Managing Director, Sentry Doors, explains; “We were delighted to work alongside Mila Maintenance and Installation once again to fulfill this project using a number of our products. What struck me from the start was the great communication that came from the operations team led by Dean on site; it helped us enormously to plan and ensure we could meet all the project timescales”.“It was great for us to see Sentry Doors included on the project and to know that the residents have an excellent fully tested and accredited product installed in their homes”.To find out more about our range of flat entrance & communal fire and security doors view our Product Page

Since our eight-year contract with one of our key major contractors began in April 2019, we have supplied over 1,000 fully certified, timber fire and security doorsets to a major tower block project within a London Borough. And due to the project’s unprecedented success, it could be given a further seven-year extension.Our fire doorsets were selected as part of the repair and maintenance to various flats in the London borough. We supplied a range of FD60s flat entrance door styles, including FED20 flush door, four panel design FED11, and FED16 glazed doors. Doorsets installed to the tower blocks were paired with the TS008 Letterplate and Cowl, which provides better protection against manipulation and fishing.Achieving dual certification (Q-Mark Fire Door Manufacture and Q-Mark Enhanced Security), our FD60 flat entrance doorsets offer full compliance and peace of mind.We also supplied PAS24: 2016 Secured by Design doorsets, fitted with hardwood thresholds and Rutland TS5204 overhead door closers. All FD60s doors are equipped with Winkhaus AV2 locking systems, while sheltered blocks are furnished with a Balmoral Lever handle, featuring a 3-star cylinder, and an additional spyhole for wheelchair users.This major contractor commented, “For something as critically important as fire rated doors, we only work with suppliers who can offer the highest standards of quality and service. That’s why Sentry Doors is our supplier of choice for fully certified fire safety and security doorsets.” Major ContractorThe council’s properties will soon undergo planned improvements, which will involve replacing bathrooms, kitchens and windows, as well as decorating and developing communal areas.We work closely with our partners to improve the safety of resident’s homes and meet exacting project timeframes. If you’re considering fire doorsets for your next project, look no further than our fully certified Internal Flat Entrance Door range.

Premier Security & Fire Consultants has joined forces with leading forensic security company DNA-Detect to create a market-first, integrated high-security door system armed with a Forensic DNA traceable, marking fluid.Our design team has worked with DNA-Detect to incorporate an automatic spraying system into our LPS1175 SR2 (B3), SR3 (C5) and SR4 (D10) and our upcoming SR5 (E10) security door designs tested and passed by the BRE (Building Research Establishment), the UK’s No.1 testing house.If attacked, the DNA based security system will automatically dispense a covert spray concealed within the door frame. The perpetrator will be forensically marked linking them to a crime scene providing irrefutable evidence to prosecuting authorities.Each DNA-Detect Forensic Perpetrator Marking system contains a unique, registered Bio-synthetic DNA Code. The UV Marker in DNA-Detect’s products is Orange, to avoid any confusion with other products which may offer different colour UV MarkersOnce in the police custody suite, the police will check a suspect for the UV marker and will then proceed through the police process to take swabs from the marked area for submission to DNA-Detect’s forensic Labs for DNA extraction using a process known as Polymerase Chain Reaction (PCR)If the sequenced code recovered from the perpetrator’s skin and clothing matches the code from the registered door device, which can be securely verified at the ISR (International Security Register) then this will provide prosecutors with irrefutable evidence pinpointing the perpetrator to the crime scene.Premier Security & Fire Managing Director Neil Johns welcomed the collaboration with DNA-Detect. “Breaking new ground with unique designs and ideas is very much in Premier’s own DNA. The combination of Premier’s certificated door systems and the DNA-Detect trace system certainly brings an exciting, new element to the security market.”Those words were echoed by Chris Taylor – Chief Technical Officer at DNADetect. He said: “We are delighted to be partnering with Premier in this important industry-first initiative. Integrating Forensic DNA Spray Technology within Premier high-grade security doors will provide the ultimate deterrent to violent attacks within both private and business premises. This will ensure our client’s safety, protection and business continuity.”Premier Security & Fire Consultants is the UK’s leading supplier of Secured by Design LPS1175 door systems with more than 2000 designs and options including SR2; SR3; SR4, fire-resistant and thermally brokenTechnical Overview:An integrated compact modular DNA based Forensic Security System can be completely concealed within, for example, a door frame or above any entry point.The unique DNA and UV mark will forensically link an offender to a crime scene providing irrefutable evidence to prosecuting authoritiesWhen installed above or within an entry point or a door, the system will activate when the door is attacked. The perpetrator will be Forensically marked with a DNA based Forensic Marker and Orange UV fluorophore, dispensed as a covert spray from within the door frame or over the entry point.The unique DNA code within each door frame installation is backed up and registered on an LPS1224a secure database managed by the International Security Register (ISR)The Forensic DNA component within DNADetect’s system is widely tested and proven in court as a highly effective deterrent to criminal activity.​Unique DNA markers provide irrefutable evidence linking an offender to a crime sceneEach DNADetect Forensic Perpetrator Marking system contains a unique Bio-synthetic DNA Code which is registered to the trained security professional.When called to the scene of an incident where a DNADetect product or system has been activated, the police may use their standard-issue 365nM UV torch to look for a UV Marker on the perpetrator.The UV Marker in DNADetect’s products is Orange, to avoid any confusion with other products which may offer different colour UV MarkersOnce in the police custody suite, the police will then check the perpetrator again for the UV marker and will then proceed through the police process to take swabs from the marked area for submission to DNADetect’s forensic Labs for DNA extraction using a process known as Polymerase Chain Reaction (PCR)If the sequenced code recovered from the perpetrator’s skin and clothing matches the code from the registered canister (which can be securely verified at the ISR (International Security Register) then this will provide the Police and Prosecuting Authorities (CPS) with irrefutable proof that the perpetrator was at the crime sceneKey Features of DNA Detect’s DNA Forensic Marking Systems:Forensically Robust – DNA Markers have been proven in court to irrefutably link the suspect offender to the offenceIntrinsically Safe – All materials used within DNADetect Jet are safe having undergone extensive Toxicology testingEnd to End Secure – Every DNADetect Jet Device is registered to a trained security professional on an LPS 1224 Secure Database.Accredited Training Programme – DNADetect can only be used by Security Personnel that have undergone an accredited training programme delivered through DNADetect’s ‘Trusted Trainer’ network. This negates misuse ensuring that if and when deployed, the authorities can have confidence that the DNADetect was deployed as a last resort and inline with legal guidelines (within Common Law and Criminal Law – both of which are covered in the training programme)For further information about DNADetect, please contact:Chris Taylor – 07824099907Clive Lloyd – 07730370381Website: dna-detect.com 

Heathrow Airport is the UK’s largest and busiest airport connecting the UK to over 80 long haul destinations and flying over 80 million passengers worldwide. Project/doors: Hart has over installed over 280 doors across all terminals including high speed smoke screens, fire conveyor shutters, security shutters, internal and external high speed doors, insulated fast action doors, sectional doors and pedestrian doors.The challenge Terminal 5 baggage handling system serves around 32 million passengers per year and handles around 6000 bags per hour.  Hart were asked to design, manufacture and install a specialist and unique automatic smoke screen system capable of handling over 6000 bags per hour, while providing a seal for 30 minutes in the event of fire. The solution Hart were the only company to provide a solution that fully met all the design requirements. Two years after the initial talks with the client, Hart successfully completed the manufacture and installation of all of the high speed smoke/fire screens within the main check in area, comprising 102 check in desks. Hart also installed a mixed package of roller shutter and fire doors in the lower ground service area and fire shutters on the Tube access tunnels leading directly to Terminal 5. The success Hart was chosen for the quality of engineering and the ability to meet the clients demanding specification and operating requirements. Hart continues to work with contractors and OEM’s such as Vanderlande, Mace and Balfour Beatty on site supplying upgrades and new doors when required

Coopers innovative FireMaster Plus2 fire curtains was also used to create tenable zones as the product offers both integrity and radiance performance. The use of all the fire curtains allowed the open plan design of the museum to be realised by offering fire compartmentation and boundary protection. A total of 20 Simplex and Duplex FireMaster Horizontal fire curtains and 110 FireMaster and FireMaster Plus fire curtains have been installed in the museum by Coopers Fire UAE partners, Dosteen Doors.

Suffolk Fire and Rescue Service recently commissioned Norwich-based Cooks Industrial Doors to replace failing vehicle access doors at Long Melford Fire Station in rural Suffolk. As a major reseller and installer, Cooks contacted Jewers Doors to design and manufacture state-of-the-art sliding-folding doors which would replicate the style of the original doors.

Bettys & Taylors of Harrogate is a fourth generation independent family business, passionate about some of the finer things in life – beautiful tea rooms, handmade cakes, traditional breads, proper tea and top quality coffee. They are the business behind Yorkshire Tea, Taylors of Harrogate coffee and the famous Bettys Café Tea Rooms.Project/doors: 5 Speedor Super, 1 Speedor Mini, 12 Fire Shutter, 21 Pedestrian doors, 1 Electric roller shutter, 1 Insulated Roller ShutterThe challenge Due to the size and weight of the insulated roller shutter at 10.5m wide and 6.3m high, this was a difficult installation in an area where the headroom was very tight. A crane was required to lift the shutter into position after opening two holes in the building’s roof so lifting chains could be dropped through to facilitate moving the shutter into position. The solutionHart was contracted by Sir Robert McAlpine to supply and install a range of industrial doors at the Taylors of Harrogate site.  This included the installation of the three-tonne insulated roller shutter completing a work package of over 40 doors. The success The installation of the shutter concluded a project which Hart was involved with through Sir Robert McAlpine and which saw almost every Hart door product installed – from Speedor high speed doors to fire shutters, security shutters and steel personnel doors. 

London Fire Brigade chose Jewers Doors to design and manufacture 46 setsof fast acting exit doors for emergency vehicle bays at nine new Fires Stationsas part of a £51 million refurbishment program.

Guernsey Airport Fire Station are a service specialising in the prevention of plane fires, located within proximity to the airfield to allow quick action in the event of an emergency. The work was implemented for G4S Secure Solutions (Guernsey) LTD on behalf of the state of Guernsey fire service at Guernsey Airport. HAG Ltd was enlisted to help the installation of 4 electrically operated Q Doors. Originally using sectional overhead doors, they instead switched to a product which had thermal properties and ease of operation.

Premier Security & Fire Consultants Ltd designed, fabricated and installed these security products for instructing clients, the Wates Group.The project in Tower Hamlets, East London included LPS1175 SR2 Secured by Design security installations including: Fully glazed entrance doors with side screen and control panel; bin store doors, vehicle and pedestrian gates, louvred doors and dry-riser box doors.For more information about Premier, go to our website premier-ssl.com or call us on 0208 559 8295. 

HAG was honoured to be chosen to install industrial doors on the new headquarters for the Dorset Fire Service, designed by Prince Charles. The £3 million building included grand neo-classical design and a mock balcony, which meant HAG had to be particularly careful in the design and planning of the installation. The specification was to match the styling of the three-storey fire station while still providing the high levels of security and ease of use required for the situation. Our industrial Q Doors perfectly balanced the stunning aesthetics with the structural integrity and functionality required for this prestigious contract.