"external entrance doorsscreens"

External door hardware face constant environmental challenges, enduring exposure to pollution, corrosive salt air in coastal regions, and the relentless elements. Unlike their internal counterparts, external hardware requires special attention to maintain optimal functionality and appearance.PROACTIVE MEASURES FOR LONGEVITY:ortunately, these issues can be easily avoided with a proactive approach to care and maintenance. Implementing regular tender loving care (TLC) with the right products can make a significant difference in preventing complications and ensuring customer satisfaction.HOW TO MITIGATE COMMON ISSUES:TEA STAINING AND FLASH RUST ON HARDWARETea staining, a common cosmetic issue on the surface of stainless steel, doesn’t compromise structural integrity but can affect the hardware’s aesthetics. To address this concern:Regular Cleaning: Tea staining can be avoided with routine cleaning. Use a soft cloth and mild soapy water to gently clean the hardware.Proper Drying: After cleaning, ensure thorough drying with a clean, soft cloth to prevent residue accumulation.Correct Cleaning Technique: Rub or wipe the hardware in the direction of the brush or polish lines to maintain its appearance.By incorporating these simple yet effective practices into your hardware maintenance routine, you can extend the lifespan of your external door hardware, promoting customer satisfaction and minimizing the need for costly call-backs. Remember, a little care goes a long way in preserving the integrity and aesthetics of your hardware.

With all-glass revolving doors and vast glazing panels, the INTRAform DM entrance matting at 338 Euston Road appears to flow seamlessly from inside to out. Encompassing the angled and recessed doorway, the external matwell continues the line of the interior mat to square. This interesting combination of internal and external matting creates a highly practical design feature. Zonal entrance matting system Using INTRAform DM with differing inserts in the internal and external zones, the architect has created a two-stage zonal system. In zone 1 external, the matting is inset with multidirectional rubber which scrapes away excess dirt and moisture from footwear and wheels. With the entrance on the corner of the building, the flexible rubber fins ensure performance, whichever the direction of approach. In the primary mat, (zone 2, internal), the profiles are inset with highly absorbent INTRAlux Elite polyamide fibre. These inserts remove and retain any remaining dirt and moisture to ensure a safe and slip-free entrance. With the revolving door sheltered within the recess, the matting here is also inset with fibre. Made from 100% Econyl regenerated nylon fibre and capable of absorbing 5.4l/m2, INTRAlux Elite is both a practical and sustainable choice. Minimal design, maximum impact The INTRAlux Elite fibre in Grey 606 matches tonally with the multidirectional rubber. The oversized entrance matting panels lessen the use of diving t-bars. While the positioning of the t-bars has been carefully planned to align with the threshold. Along with the glazed façade, these elements help maximise the impact of the architect’s design, to create a stunning entrance. Learn more To learn how to create a practical, sustainable, and beautiful specification for your next project come along to one of INTRAsystems’ entrance matting CPD webinars. Approved by both the RIBA and the BIID, the 45-minute sessions cover everything you need to know about entrance matting specification; from functions and applications to fire safety and sustainability. Register for free today: https://intrasystems.eventbrite.co.uk

DESIGN BRIEF / OVERVIEWStrata Tower was the first development in the world where wind turbines were constructed within the fabric of the building, setting new standards in sustainable living and becoming one of London’s new icons. Our brief: to design a ground floor entrance that was as commanding as the building above it.SOLUTION:The Strata Tower's 4.5 meter high automatic revolving main entrance door, with enhanced security features and frameless 4.5 meter high automatic pass door, was developed by Open Entrances to meet BFLS' (formerly Hamiltons Masterplanners) design intent.

Strata Tower was the first development in the world where wind turbines were constructed within the fabric of the building, setting new standards in sustainable living and becoming one of London’s new icons. Our brief: to design a ground floor entrance that was as commanding as the building above it.SOLUTION:The Strata Tower's 4.5 meter high automatic revolving main entrance door, with enhanced security features and frameless 4.5 meter high automatic pass door, was developed by Open Entrances to meet BFLS' (formerly Hamiltons Masterplanners) design intent.

Using hexagonal INTRAshape entrance matting tiles exclusive to INTRAsystems, Aberystwyth Innovation and Enterprise Campus (Aberinnovation) creates a striking first impression on visitors. Available in five tessellating shapes and a variety of sizes, INTRAshape entrance matting tiles offer endless creative possibilities. Compatible with our complete range of INTRAlux fibre inserts, their aluminium frames can also be anodised to suit your designs.

A well-known and commonly used component of external wall coverings has wrongly remained unloved by the architect for almost 20 years since its introduction to the UK market in 1990. Whilst it is widely accepted that external wall insulation (EWI) systems and external render can dramatically improve the U-values of a building, the materials that are used in these systems may not be so popular.

Combining the former Mayble Tylecoate and Grosvenor buildings, MMU’s new Arts and Humanities hub uses INTRAflex XT entrance matting for a classic aesthetic.With the listed portico and the internal glass vestibule providing some shelter from the elements, the architect specified a primary entrance matting system with INTRAlux Elite fibre inserts in Anthracite 607. This fibre has an exceptional tuft count to provide 5.4l/m2 of absorption, combined with the highest Class 33 Wear Rating. To enhance performance with this simple primary entrance matting system, the specification provides a substantial walk-off area.With 19,550mm wide entrance matting, entry through the main portico doors offers nearly 10,000mm of walk-off in either direction. While the adjacent pass doors are protected by entrance matting that measures 3629mm front-to-back.

Perfectly blending into its surroundings, the entrance matting at 22 Bishopsgate helps create a blank canvas to showcase the contemporary artwork adorning the foyer. At the main entrances, INTRAflex XT is used in the primary matting area, while a combination of INTRAflex XT and INTRAflex Radial are used within the revolving doors. The mats all feature INTRAlux Linear fibre inserts in Grey 451 to match tonally with the floor. Together, the ribs of the fibre and mix of matting systems provide a subtle textural contrast to the hard surfaces.

We’ve had a long-standing relationship with Birmingham University, having installed many doors and operators in the past. The University has a large campus, and we have a few projects under our belts where improved sustainable access has been achieved.Below is a fine selection of some of our more recent installations.Project Year: 2023Product: ASSA ABLOY SW200 Operator (Main entrance)Product: ASSA ABLOY SW200 Operator (Harding Building)Product: ASSA ABLOY SL500 F (Arts & Law Building)Project Background: The University’s goal is to make every door and every entrance accessible for everyone so it’s inclusive, reflecting their commitment to diversity and equality. By prioritizing accessibility, they aim to ensure that all members of the university community, regardless of their physical abilities, can navigate the campus with ease. Through these efforts, Birmingham University continues to set a standard for higher education institutions striving to provide equitable access to education and resources for all.With this in mind, the facilities management team required robust, reliable and energy saving elements to their entrances.Solution: Two of the buildings required strong operators to withstand the daily use of their current swing doors. Our elegant heavy duty SW200 swing door operators were incorporated into one of the University’s main entrances and The Harding building, which both required reliability and ease of entrance, as students are often carrying heavy bags full of books and electronics. The SL500 Framesliding door was installed in the Arts & Law building, allowing for a seamless and responsive entrance as you enter the bright lobby. This helped to reduce the amount of energy required in this building, making it more efficient at heating and cooling.We have more projects in the pipeline with Birmingham University as they continue to enhance their facilities. Our commitment to providing first-rate door solutions and operators aligns perfectly with the university’s mission to create a welcoming and accessible environment for students, staff, and visitors.Check out more Education solutions.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.Pictures by NickCaville.com

Please click on the external URL link to read the full Currys case study.

Providing a secure and reliable office entranceEDF are one of the UKs largest energy providers, with their head office serving as the strategic hub that plays a pivotal role in its overall functioning and success. At FAAC Entrance Solutions, we understand just how vital a secure and reliable entrance is to such an important business. From the initial design working with Pick Everard, we reviewed the best entrance solution, to meet the clients brief and requirements.Project Year: 2023Product: FAAC A1400 Slider with pocket screen & TK35 profileProduct: RD100 Revolving DoorProduct: Magnetic mWing Pedestrian GatesProduct: FAAC Airslide Sliding DoorProject Background: The facilities team at EDF wanted to increase security with a safe and secure entrance that would suit their ground structure. They wanted a full entrance solution with a revolving door at the end of a bridge with a sheltered glass tunnel leading up to a pair of automatic sliding doors and security lanes. As part of the project, we worked closely with the contractor Imtech Inviron Ltd and all the project team, whilst meeting all challenges along the way, we aimed to create the perfect solution without disrupting the space and flow of the foyer whilst entering and exciting the building.Solution: One key item was enabling staff to be able to enter the entrance corridor through a revolving door, providing a sustainable and weathertight area out of the weather, then having a secondary entrance through a pair of automatic sliding doors, therefore providing an improved entrance with high protection against all weather conditions. To comply with Part M of buildings regulations, we provided our unique FAAC Airslide automatic sliding door system, to ensure accessibility for all.Once inside the building, we installed a bank of 3 security lanes, to control the access for authorised users only and preventing unauthorised personnel from entering the building.Revolving door: The RD100, a power-assisted door, elevates functionality for any office entrance with pedestrian traffic. This compact revolving door accommodates various pedestrian flows effortlessly and at their preferred pace. Manually activated, pedestrians push the door to start. Once the smart system activates, it guarantees smooth movement in both directions, reducing effort and power use, easing entry/exit, and reducing the carbon footprint.Sliding door: Our FAAC A1400 sliding door’s innovative “energy saving” feature empowers this system to discern transit direction, meticulously optimizing opening and closing times. This functionality effectively prevents unnecessary air dispersion, even amid cross traffic occurrences. The resulting product is environmentally conscious, reliable, secure, technologically advanced and notably, cost effective in the long term.Pedestrian Gates: The Magnetic mWing Pedestrian Gate system ensures swift visitor flow with quick opening times and preset travel features, ensuring high-security standards in both monitored and unmonitored areas. Engineered for durability and comes with a unique surface finish.AIRSLIDE Sliding Door: FAAC supplied and installed 1 of our unique AIRSLIDE automatic sliding doors, with an integrated air curtain. An air barrier protects the entrance area from the cold in winter and the heat in summer, without dispersion. This solution, designed for automatic entrances, allows the air to be kept inside the building, thereby helping to reduce energy consumption.The AIRSLIDE system combines the automatic opening and air curtain systems into a single unit, with obvious aesthetic and functional advantages. Its sleek design makes it easy to integrate into any architectural perspective.Check out more of our Energy Solutions.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

Established in Eastbourne over 130 years ago, W.Bruford is proud of its reputation for exceptional service, exclusive choice and attention to detail. They are recognised as a prestigious jewellers and pride themselves in offering the highest quality products and services. We wanted to do their brand justice by working closely with them to make their vision for their entrance come to light.Project Year: 2019Product: ASSA ABLOY SL500 Transparent Sliding DoorProject Background: Having worked with Innovare Design on their shopfront redesign, the client approached us to request a bi-parting all glass automatic door with side screens and pocket screens, and for the operator to sit above the ceiling and be the closest match to the bronze finish on their sign. As a high end jewellery store, both security and a clean and sleek look, were priorities for the entrance.Solution:FAAC Entrance Solutions installed the SL500 Transparent sliding door four panel system and finished the operator cover in a 50% gloss Light Bronze RAL Finish. The pocket screens were replaced by flush mounted EN16005 compliant safety presence detecting sensors which together with the 10.8mm glass and a dotted manifestation, contributed to an elegant yet safe entrance. We integrated mechanical bolt floor locks, and first-entry switch and last-exit push buttons for the use of staff. For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

Enhancing Accessibility and Efficiency: Creating user friendly entrances at Birmingham UniversityWe’ve had a long-standing relationship with Birmingham University, having installed many doors and operators in the past. The University has a large campus, and we have a few projects under our belts where improved sustainable access has been achieved.Below is a fine selection of some of our more recent installations.Project Year: 2023Product: ASSA ABLOY SW200 Operator (Main entrance)Product: ASSA ABLOY SW200 Operator (Harding Building)Product: ASSA ABLOY SL500 F (Arts & Law Building)Project Background: The University’s goal is to make every door and every entrance accessible for everyone so it's inclusive, reflecting their commitment to diversity and equality. By prioritizing accessibility, they aim to ensure that all members of the university community, regardless of their physical abilities, can navigate the campus with ease. Through these efforts, Birmingham University continues to set a standard for higher education institutions striving to provide equitable access to education and resources for all.With this in mind, the facilities management team required robust, reliable and energy saving elements to their entrances.Solution: Two of the buildings required strong operators to withstand the daily use of their current swing doors. Our elegant heavy duty SW200 swing door operators were incorporated into one of the University’s main entrances and The Harding building, which both required reliability and ease of entrance, as students are often carrying heavy bags full of books and electronics. The SL500 Frame sliding door was installed in the Arts & Law building, allowing for a seamless and responsive entrance as you enter the bright lobby. This helped to reduce the amount of energy required in this building, making it more efficient at heating and cooling.We have more projects in the pipeline with Birmingham University as they continue to enhance their facilities. Our commitment to providing first-rate door solutions and operators aligns perfectly with the university's mission to create a welcoming and accessible environment for students, staff, and visitors.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

It can be difficult to find a lift that will operate outside without providing complete shelter from the elements. Full enclosures can have a significant impact on the building appearance and there may also be space constraints in lightwell situations. Penny Hydraulics Ltd uses design automation to quickly produce layouts based on its modular lift systems that can be adapted for external installation. The company has been manufacturing lifts in the UK for over 30 years and so has much experience to help find solutions that it knows will work well for the end user. Blueprint Studios in Manchester were experiencing problems moving audio equipment up to the first floor recording studio safely. It would have been very costly to fit internally both in terms of cost and space so a Penny Hydraulics MezzLift was installed externally within a minimal black frame and polycarbonate clad shaft to satisfy Listed Buildings consent. This saved considerable building works whilst enabling the Studios to become safer and more efficient. If the change in level is below 1.5 metres then a Loading Bay Lift could have been used that has much less impact over a more traditional style lift.

Using INTRAflex XT bronze profiles with truffle inserts, the entrance matting at EightyFen blends seamlessly with the warm tones, textures and a strong linear aesthetic of the building.

Entrance matting specified by architects at Allford Hall Monaghan Morris balances quality, performance and sustainability to perfectly meet the needs of Two New Bailey Square.

NyRock Frame Slab 032 - in external wall - timber frame

With health and wellness a top priority, a high performance commercial entrance matting system is essential within hospitals and healthcare settings. Using INTRAform DM Low Profile entrance matting with a combination of inserts, BDP created multiple safe and hygienic entrance points to Grange University Hospital (GUH). About the building Serving over 600,000 people, this world-class healthcare facility treats patients needing complex emergency or critical care. Offering 471 beds, it is home to more than 40 specialist services. In addition to the main entrance, the building has multiple access point including staff changing areas, ambulance entrance with associated trolley traffic and other pedestrian entrances to different clinical areas. Many of these entrances are in use 24 hours a day and exposed to the elements. The Solution Following consultation with the INTRAsystems specification team, the architect selected clear anodised INTRAform DM Low Profile entrance matting. With its heavy-duty closed construction aluminium planks, INTRAform DM Low Profile is ideal for locations with high foot and wheeled traffic, such as this busy hospital. The closed construction offers ease of cleaning, while the low-profile design provides a cost-effective solution without compromising performance. Extra-wide insert sections ensure maximum contact with footwear and wheels to deliver optimum dirt and moisture absorption over smaller areas. Along with the clear anodised finish, they also help to minimise strobing which can be an issue when specifying contrasting fibre and wiper bars. Modified Zonal System To maximise performance, all entrances to the hospital use a modified zonal system within a single internal, recessed matwell. All the mats feature an initial section of multidirectional rubber inserts which gives exceptional scrapping action to remove debris and excess moisture at the threshold. At the main and ambulance entrances to the hospital where traffic is heaviest, the mats feature between 2 and 4-metre sections of rubber to ensure multiple footsteps or wheel rotations are affected. Following the initial sections of rubber, INTRAlux Elite fibre inserts thoroughly remove the remaining dirt and moisture. INTRAlux Elite offers exceptional tufting per square metre which provides superior comfort and acoustic absorption. With 92,990 tufts per square metre, INTRAlux Elite can absorb and retain 5.4L/m² - perfect for the inclement Welsh weather. By specifying a modified zonal system, the architect has created a robust yet cost effective entrance matting system to maintain safety within the building and extend the life of internal floor coverings. Learn more With entrance matting providing the first line of defence against dirt and contaminants a robust entrance matting specification in hospitals and healthcare settings is critical. To learn about the nuances of specifying entrance matting in a healthcare setting, read our article on Specifying Entrance Matting for Hospitals & Healthcare on ribacpd.com

An entrance that needed reviving and improved functionGeorge Eliot Hospital is based in Nuneaton, Warwickshire. It provides a full range of emergency and elective medical services to the local area, including maternity services.Project Year: 2022Product: UniturnProject Background: We were contacted directly from the hospital’s Estates Department to review an existing traditional sliding door entrance, with a view to proposing a solution to upgrade to a high capacity revolving door. An important need was to improve the temperature in the reception area, enabling climate control.The existing entrance lobby was too narrow to accommodate both the revolving door and necessary adjacent pass doors to meet Equal Access requirements and so we had to come up with a different solution.Solution: To overcome the narrow lobby entrance we proposed to locate the revolving door in front of the existing lobby’s footprint, which in turn required the building’s foundation slab to be extended under the revolving door location.This solution required detailed technical and design input from FES to the client’s nominated building contractor and design team to ensure that the build was both structurally sound, aesthetically pleasing and met the relevant building regulations.The Uniturn has improved accessibility in and out of the hospital and has provided energy savings and temperature control, resulting in a successful project.

Visitors to 77 Coleman are welcomed into a spacious 4-metre high reception space with a distinctive entrance mat design created using the INTRAtech entrance matting system. Extending beyond the main recessed matwell, a further 600 individual INTRAtech matting squares are cut directly into the terrazzo flooring in 5×5 blocks.

To maintain a safe, clean entrance befitting this renowned institution, bronze anodised INTRAform entrance matting runs the full length of the lobby. Encompassing three revolving doors and pass doors, the entrance matting measures over 30m x 3.5m deep and utilises a modified zonal for optimum performance.

The Beacon Shopping Centre is well known for great places to shop, eat and play. The busy centre required a sturdy door with a strong profile to take on the variable weather conditions. We were happy to advise and provide a solution that allowed savings in energy costs and a pleasant experience for shoppers.Project Year: 2020Product: (Terminus Road Main Entrance): SL500 Framed Sliding Door with break out and SL500 150mm operator.Product: (Sainsbury’s entrance): SL500 Framed sliding door system with break out and SL500 150mm operator.Project Background: The Beacon shopping centre is one of Eastbourne’s most popular shopping destinations. We were contacted in conjunction with Hawes Construction Group to put in two new sets of automatic sliding doors across the mall in two locations; the centre’s main entrance and the entrance to Sainsbury’s within the centre. Hawes Construction laid the foundations and installed new steel columns which were part of the doors support system, getting the site ready for the door installation.Solution: We installed the SL500 Framed sliding door with a 4 leaf panel, side screens and SL500 bi-parting operator, providing extra sturdiness and protection from the strong winds that regularly hit Eastbourne. We used Clear Insulated laminated 22mm glass which look streamlined whilst creating an improved environment for customers and staff at The Beacon.Our exclusive presence detection sensors and sidelight presence detection sensors were a large factor in enabling the doors to provide a more energy efficient outcome for the shopping centre. The FAAC sensor technology allowed partial opening of the doors, which saved ample energy as doors do not open unless somebody intends to walk through them. Presence detection sensors and sidelight presence detection sensors to comply with EN16005.The final outcome was a great success, creating optimal accessibility for all users, streamlining entry and saving energy.

The English National Ballet – the AJ100 Building of The Year 2020 – impressed judges with its ‘pared-back, attractive simplicity’. This design restraint filters through every aspect of the build, down to the specification of a classic monochrome entrance mat using INTRAform DM Low Profile. Using a combination of black ribbed polypropylene and multidirectional rubber inserts, the architect has created a highly effective zonal matting system with a clean, simple aesthetic.

The English National Ballet – the AJ100 Building of The Year 2020 – impressed judges with its ‘pared-back, attractive simplicity’. This design restraint filters through every aspect of the build, down to the specification of a classic monochrome entrance mat using INTRAform DM Low Profile. Using a combination of black ribbed polypropylene and multidirectional rubber inserts, the architect has created a highly effective zonal matting system with a clean, simple aesthetic.

To complement the atrium’s strong linear aesthetic the architect specified INTRAform DM Low Profile entrance matting in silver finish. In a striking design statement, the entrance mat is rotated from square, creating an angular extension of matting towards the reception desk. This unique positioning helps to both guide visitors towards reception whilst simultaneously orientating itself towards the main traffic flow of the building.

The vibrant, ivory-coloured façade of a new healthcare facility in Cornwall posed no problem for the Renderplas range of coloured PVCu external render beads. Renderplas provided a decorative and durable solution to match the through-coloured render of the £1.9m building. In addition to enhancing the building’s fresh-looking façade, ivory-coloured Renderplas beading has ensured straight, durable joints, corners and edges on all external rendering. The PVCu material is scratch resistant and will not discolour over time, so any exposed joints and edges will continue to complement the colour of the façade indefinitely.

Project: Manufacture and installation of bespoke 3D GRC cladding panels in Tempest Grey colour and Silk finish Client: Morgan Lovell Materials used: Panels were produced using BTX GRC high performance concrete in 3 meter length and only 20mm thickness. Bespoke 3D BTX GRC high performance concrete cladding panels were installed by Living Concrete to the famous 10 Old Bailey entrance. The panels were 3 meters in length each but only 20mm thick. Panels were double fixed to a steel frame and sealed in a Silk finish.

Tamesis 1 is a busy office complex near Egham, Surrey with a granite paved entrance subject to regular heavy traffic.

In November 2013, we were contacted by Stroods Specialist Contractors who were working on a project at Colchester General Hospital and required a canopy over the entrance of the accident and emergency department.

New Era cradles were used to lay a level decking system on a roof terrace that had natural sloped drainage. We used UC4 treated external swedish softwood battens and composite decking to ensure long lasting and maintenance free-use.

Dual finish wooden windows and doors were used in the renovation of this delightful 1900’s Arts and Crafts style property. The family chose from the Lomax + Wood made-to-order range of timber flush casements and doors. 42 Double glazed fully weather-stripped flush casement windows, French doors and entrance doors. Dual colour factory finished paint colour. White internally and Squirrel grey externally. Engineered timber for stability and durability. Espagnolette locking for security. Faceted bay windows. Polished chrome ironmongery.

Wexham Hospital in Slough, Berkshire required a freestanding entrance canopy installed at the entrance to their A&E department. This canopy would provide cover to those entering and exiting the building, ensuring the internal floors were kept as dry as possible. The hospital staff were also finding that stone chippings were being brought into the building and flicking up into the mechanism of the electronic doors, resulting in the motors burning out and so a solution was also needed to solve this issue.

A recently completed residential complex in the centre of London is where you will find this magnificent building which has been finished to the highest standard. The reception area is welcomed by a circular entrance with a pool of water at the centre. The stone that's been used is a pale cream and the metal work is a light bronze. We provided the pull door handles which complement the colours and materials used. The have been finished in a dark bronze adding a dramatic entrance across the front of the building and on the main entrance. You can find a range of finishes which we offer across a range of products. The front of the building benefits from planted up areas which breaks up the hard lines, this along with the curved stone seated areas creates a pleasant place to sit and sip a coffee. There have also made great use of lighting in the main lobby area and the reception is grand and welcoming. The style of our handles used are Ash 103.

INTRAgrille XT and INTRAdisc create a highly functional yet unique entrance to the brand new YOTEL in Glasgow. Available in three standard sizes with or without flange, in your choice of stainless steel, aluminium or brass, INTRAdisc entrance matting can be used alone or in combination to create unique scattered designs.

Rockpanel non-combustible external facades dresses the contemporary redevelopment and extension of an existing Grade II Listed building, harmonizing old with new, bringing a crisp style and warmth to this important regional health and care hub.

When architects Scott Brownrigg were given a brief to create a new gateway to Cambridge Science Park they knew the building had to be impressive to attract the desired high tech and research and development companies. The design features a colonnade sweeping across the front of the building echoing the curve of the spine road and a new public space. The column spacing guides occupants and visitors to the entrance – a GEZE SlimdriveSCR curved automatic sliding door. Slimdrive SCR was chosen to fit with the building BREEAM Excellent rating. The circular entrance features two sets of automatic bi-parting curved glass sliding doors, creating a lobby that minimises heat loss or gain and so helps to contribute to the building’s environmental credentialsWhen architects Scott Brownrigg were given a brief to create a new gateway to Cambridge Science Park they knew the building had to be impressive to attract the desired high tech and research and development companies. The design features a colonnade sweeping across the front of the building echoing the curve of the spine road and a new public space. The column spacing guides occupants and visitors to the entrance – a GEZE SlimdriveSCR curved automatic sliding door. Slimdrive SCR was chosen to fit with the building BREEAM Excellent rating. The circular entrance features two sets of automatic bi-parting curved glass sliding doors, creating a lobby that minimises heat loss or gain and so helps to contribute to the building’s environmental credentialsIn addition the Slimdrive SCR automatic curved sliding door provides a light and airy all-glass lobby entrance which blends into the façade and the large glass atrium; it combines high performance with unobtrusive operation. Inside the operator’s deep canopy an integrated air curtain was installed to further minimise any heat loss and maintain the aesthetics of the building. The Slimdrive SCR automatic operator also provides uninhibited access and so meets the demands of Part M, BS 8300 and EN 16005, whilst the access control system ensures security. Shortlisted for office awardsRecognising the outstanding design of the building, the Cambridge Science Park has been shortlisted for the 2023 British Council for Offices (BCO) Awards. The BCO’s primary objective is to define excellence in office space. Ross Mcwatt, associate architect at Scott Brownrigg said: "We have worked with GEZE several times, they have the same focus as we do in terms combining sustainability, accessibility and aesthetics." Richard Richardson-Derry, national specification manager at GEZE UK added: "This is an outstanding building, that meets many demands. We were delighted to play a part in creating an entrance and achieving the criteria of the brief."