"drink and food dispensing and vending machines"

This drinks cabinet has exquisitely sculpted doors from a piece of solid oak revealing wonderful shapes and patterns in the grain that lie beneath the surface.Solid oak construction throughout provides a solid piece that will stand the test of time and become a true heirloom. The cabinet was finished with Rubio Monocoat Oil Plus 2C in Pure.

IPVIEW Machine Works House81 flats, mixed private and housing associationCREST NICHOLSON

ACE solution for the decoupling of production machines ensures calm in chocolate production by reducing low-frequency vibrations to a minimumAt a renowned Belgian chocolatier, part of the production process led to vibration and oscillation in an adjacent house. Despite numerous tests, the manufacturer was unable to find a solution that could isolate vibrations below 20 Hz, until they came across ACE products. The PLM pneumatic levelling elements from the ACEolator range from ACE offer significant insulation from a frequency of 5 Hz and up. Now 14 PLM-3’s installed in the facility are reducing vibrations by 80 percent. Any remaining vibration can only be detected with measuring devices.

Waterproofing of three new heavy machine pits at Brunton Shaw’s cable winding factory located on a challenging site adjacent to the canal.

Bespoke Klargester grease separator installed at Euro Foods Group to help preserve their mains drainage and prevent any unwanted blockages.

Kerry Foods is the leading consumer foods processor and supplier in Europe.Project/doors:20 doors including Speedor Storm, Speedor Mini, Speedor Cleanroom. The challengeFood manufacturing sites have strict protocols to avoid contamination and to meet all regulations in the industry. Any issues with industrial doors can directly impact compliance with these regulations. This site had several competitor products that needed to be serviced and replacedThe solutionUsing our experience and knowledge we spent time surveying all of the doors on the site and advising which doors needed to be replaced, repaired and serviced to ensure they were compliant with all regulations. Due to the volume of doors in the facility, we had a weekly presence on site until all issues were eradicatedThe successWe have installed 20 doors on this site and provide maintenance and service to over 30 doors, including competitor products. The site has a range of doors to suit varying requirements, including internal Speedor Cleanroom and Mini doors, external Speedor Storms and fire shutters.

  ​​​​​​​The FasTop RS69 polyurethane cement system was used for this ongoing Bangladesh food production plant project to deliver a heavy duty hygienic floor. Sherwin-Williams FasTop Multi RS69 product used in this system delivered a thickness of 6 mm overall and 9 mm in selected areas under machines where the floor would be subjected to boiling water. The initial area totalled 3500 sqm, and then further areas were done as the applicator worked through the factory. The project was the first time Quality Floors Bangladesh Ltd. team had taken advantage of the FasTop technology which featured extreme application conditions, including temperatures of 34-36oC, day and night, and also air humidity up to 100%.

THE COMPANYAs you UK leading manufacturer in mail and parcel boxes, we always welcome the opportunity to create different solutions for our customers, whether it’s the design, size or functionality of a mail or parcel box or the feel, look and shape of materials. When Mars Foods UK got in touch, this was no exception.The Mars foods factory has been running for over 100 years and have over 130,000 associates in over 80 countries. They focus on business, wellbeing, people and sustainability.The Mars Foods factory has a strict policy regarding protective clothing in their workplace in order to meet the strict Food Quality & Safety regulations. Overalls are fully laundered after every shift, and the issuing and control of these must be organised. This project also utilises a storage shelf built under the mailboxes, offering an area to place parcels.THE PROJECTThe laundry boxes we designed and manufactured are open on the rear side of the product and locked on the front side. Laundry is placed into the box through the open side, and members of staff unlock their specific box with a designated key – accessing their fresh clean overalls ready for each shift.This project features over 300 boxes that are semi-recessed into a stud wall, mounted upon plinths which provide stability and support to the banks of boxes. Each bank of laundry boxes is fitted with a surround flange (on both the rear and front sides), ensuring a neat finish between the boxes and the wall. The mailboxes are finished in a Sky Blue (RAL 5015) colour finish which was specified to meet the branding guidelines of the company.Always aiming to think outside the box, this was another opportunity to provide a high quality solution on another interesting project.

Arla Foods is a major dairy company producing the best dairy products. It is a farmer-owned company committed to high standards.Project/doors:Over 40 doors across multiple sitesThe challengeThe existing doors which were made from aluminium were unreliable and had started corroding. Hygiene is a priority and food production areas require specialist doors to promote cleanliness and avoid contamination. Due to the lack of space, one of the doors required a special solution to be able to effectively install the doorThe solutionHart replaced unreliable aluminium bi-parting doors installed by a competitor with Harts stainless steel Speedor Minis. The Speedor Mini is a made to measure high speed roll up door with multi-layer PVC fabric which is thicker and less prone tears and splits. Stainless steel allows for easy cleaning, contamination prevention and extended life. The Speedor has a life expectance of 20+years.The successHart Doors is the oldest British manufacturer of highspeed doors and has worked with Arla for over 20 years supplying a range of door systems. Arla knows that by choosing Hart its high standards will not be compromised. Arla was given peace of mind with a 2 year warranty as standard and the confidence that Hart would deliver a quality product once again. The Review:"The fitters who attended site were excellent and professional. Well done to them." William Beale, Arla Foods

Aspen Stainless supplied bespoke stainless-steel solutions to the UK’s leading food producer Cranswick. Aspen worked closely with Trundley Design to design effective hygienic plant equipment for a number of food processing plants across the UK.The drainage system was installed to support the cleaning regime and water flow around the factory. This blended perfectly with the John Lord flooring design and allowed for waste to drain effectively into the surrounding channels and gullies; creating a seamless connection between the systems and prevented any standing waste and bacteria from building up.

Project: Fast Food Franchise HQProduct: RapidRoof Pro & FastCoat ProProject size: 300m²Location: Maidenhead

Stock and inventory of pet food manufacturer now protected from leaks for at least 25 years after Plygene Gutterline system refurbishment.

DescriptionSMET One Coat Projection Plaster HC 9-20mm Hard Coat Gypsum Plaster is a factory-produced Hard Coat One Coat Gypsum Plaster designed for machine application produced to EN 13279-1. Manufactured from a controlled blend of selected gypsum and other components to give a high-quality, high-strength plastering product suitable for use in internal plastering.The unique properties of this render make it suitable for application on low, medium, and high-density blockwork substrates.Benefits of SMET One Coat Projection PlasterOne coat machine applicationHigh strengthPerfect workabilityPerfect smooth finish in one coatHigh whiteness indexSustainableApplication up to 20mm in one passDIN EN 13279-1, B1

Lamb Street in Spitalfields Market is a popular route for visitors to walk along with small retail and food kiosks. The area has been sympathetically transformed into a new public space while retaining a semblance of its industrial heritage.Lang+Fulton have supplied 184m2 of open mesh floor grating for the pedestrianised area where customers can sit and enjoy the street food. A heel proof grating was chosen with a small 33x11mm aperture for a safe and comfortable experience.

Riding Floors Ltd, contractors with over 50 years’ experience creating stunning hospitality venue floors, have used UltraFloor Prime IT Multi-surface Primer and Level IT Bond to install a beautiful LVT floor at The Heist pub in Elland, West Yorkshire.BackgroundLocated in a former Lloyds Bank, hence the name, The Heist has been lovingly created by two local business owners who have transformed the building into a smart and atmospheric pub. Earlier this year, the bar and daytime coffee bar was transformed by experienced flooring contractors, Riding Floors Ltd.The ChallengeThe highly experienced team at Riding Floors Ltd. required rapid drying expert subfloor preparation materials that would provide a super smooth finish to install the LVT floor covering.The SolutionWith a reputation built on quality workmanship, Riding Floors Ltd knew that UltraFloor would be the ideal subfloor preparation materials to use on this project.To prepare the concrete substrate for the application of Level IT Bond, the contractors first applied a coat of Prime IT Multi-surface Primer.Formulated to promote adhesion to all UltraFloor smoothing underlayments, Prime IT Multi-surface Primer reduces pinholing, minimising the risk of costly failures. With a coverage rate of 200sqm at 3:1 dilution, Prime IT Multi-surface Primer is a must-have product for all flooring installation projects.Once fully dried, Level IT Bond was applied at a 3-8mm depth across the 180sqm bar area. Level IT Bond is a rapid curing, high performance, free flowing two-part smoothing underlayment. It has exceptional adhesion characteristics making it suitable for use over a wide variety of subfloors and substrates, including old adhesive residues.This versatile and moisture tolerant floor leveller has a set time of 90-120 minutes, can receive foot traffic in as little as 1.5 – 2 hours, and can receive bonded floor coverings after just 4 hours – ideal for projects where a quick turnaround is essential.With a coverage of approximately 5sqm at 3mm and an exceptional flow, it is unsurprising that Level IT Bond is a firm favourite for today’s flooring contractor.ResultsThanks to the rapid setting properties of Level IT Bond, the entire project was finished in one week. On completion, Danny Ambler, Contracts Manager at Riding Floors Ltd commented: “The customer loved the finished job. Level IT Bond is a great product, flows well and can be used on multiple substrates.”

It was critical to specify the correct colours for Food Chain and Salsa Mexican Grill, to ensure the brand identity was standardized throughout, with no variance. Both the Rubio Monocoat Oil Plus 2C, and Hybrid Wood Protector range was applied to counters, wall cladding, bulkheads, table tops, counter fronts, chairs, benches and door frames.

CLIENT The National Centre for Food Manufacturing at University of Lincoln leads the way for food industry innovation for businesses and employees.PROJECTProcurement of a hand dryer suitable to use within food manufacturing areas. It must be hygienic, dry hands quickly, make minimal noise and limit the creation of slip hazzards.SOLUTION- V7-300Over 300 jets of strategically placed air remove water from both sides of hands simultaniously without needing continuous hand movement. The Veltia V7-300 hand dryer uses patented technology to stop water from your hands ending up on the floor surface. This range uses Microban technology - an antibacterial protection impregnated at the manufacturing stage (that doesn’t wear out) which inhibits the growth and transference of microbes and harmful bacteria. There is also a ZeroSmell feature that neutralises bad odours. If that wasn’t enough, the V7 boasts of low noise and low energy use, too.The National Centre for Food Manufacturing (NCFM) is dedicated to helping food industry employees advance their careers. They understand the demands of working in this fast moving, dynamic industry. V7-300 hand dryers were fitted into NCFM factory areas two years ago, and the units continue to be easy to clean, quiet and perform their task very well. The hand dryer gives a very good first impression to our visitors as they pass through our hand washing systems. Alongside an extensive academic offering the NCFM is also committed to spurring innovation within the sector. An important role of the NCFM is to help food companies see what good looks like within the food industry.“The V7-300 continues to hit the high standards we set out for training and education work.”

Union Industries, the UK’s leading manufacturer of bespoke industrial doors, has helped food importer and distributer, Taj Foods, improve efficiency through the installation of high-speed freezer doors – the Eiger Door.Taj Foods, specialists in frozen exotic food and prepared meals, was established in 1980 and recently expanded its cold storage at its Sheffield warehouse to meet growing demand. The project undertaken by EJM refrigeration, involved improving its energy efficiency and carbon footprint with the installation of a new CO2 refrigeration system.The two Eiger Doors will enhance operational efficiency in the high-demand environment and will maintain consistent freezer temperatures, while ensuring unimpeded access to cold stores.Since its launch in 2002, the Eiger Door has been installed as a fast-access traffic door at major food retailers, 3PL cold storage and distribution, and frozen food manufacturers across the UK.The Eiger Door ensures that consistent temperatures can be maintained and features an innovative dehumidification system, which prevents snow and ice build-up on the door blade and frame. This feature tackles a consistent issue plaguing other door types, as the freezer encounters humid ambient air entering the cold store.Minimising downtime is also supported by the Eiger Door’s robust construction and its tried and tested crash-out and reset system. Due to the modest difference in size between Forklift Trucks and the door opening, as well as the busy nature of this freezer, this is of particular benefit at this depot when considering the long-term reliability of the Eiger Door.Rob Howe, Union Industries’ Technical Sales Engineer, said: “The installation of the Eiger Doors at Taj Foods showcases our commitment to providing cutting-edge solutions that prioritise efficiency and reliability.“Over the past 20 years, the Eiger Door has consistently proven to be a superior and effective innovation for cold storage access, overcoming challenges such as ice build-up and excessive energy use to maintain consistent temperatures.“We are confident that the Eiger Door will significantly contribute to Taj Foods’ operational success.”Anil Solanki, Managing Director at Taj Foods, said: “We were looking for a reliable door solution to fit in with the redevelopment of our Sheffield warehouse, and after reading about the success of the Eiger Door we approached Union Industries to assist us to improve operational efficiency as we doubled our capacity.“We believe that the advanced features of the Eiger Door will not only enhance the efficiency of our cold storage but also contribute to long-term reliability, minimising disruptions in our day-to-day operations.” 

Project at Arla Foods using Hoardfast partition walling to segregate live production line during new line installation

A housing development in Southminster has benefitted from having an access road installed with machine lay block paving to deliver a speedy and high quality finish in outstanding time. The access road was only 3m wide and by laying the blocks by hand, there would have been only enough room for two operatives to work side by side. This meant the entire 83m stretch of road would have taken three days to complete and would have delayed follow-on trades so the road surface needed to be completed quickly. To view the whole case study please click the link below.

Project to divide space, to create new production area for allergen control in food production facility

A combination of primer and non-slip, waterborne lacquer from Bona was used to renovate the oak floor in a food service area at Thorpe Park Hotel & Spa, Leeds. Bona Intense primer delivered a subtle grain enriching effect and Bona Traffic HD Anti Slip was chosen for its combination of high durability and low level slip potential that surpasses the HSE’s low level slip classification of 36+ when tested using the Pendulum (CoF) test. Floors finished with Bona Traffic HD can be put back into full use after just 12 hours – perfect when avoiding downtime is a key requirement.

Café Spice Namaste has always promoted sustainable solutions in the hospitality sector. Their passion for reducing the carbon footprint and giving back to the community has driven the business forward, helping to make the sustainable choices when it comes to suppliers. Bottled water, which clocks many “water miles”, will not be featuring on his menu.Instead, Cyrus, owner of Café Spice Namaste, wants a high-performance water dispenser to serve fresh, filtered drinking water in own-branded water bottles.Café Spice Namaste has chosen our high-capacity Aqua Alto water dispenser with three individual taps in blue, red, and white.The restaurant’s new Aqua Alto taps will dispense high volumes of chilled, sparkling, and boiling water. The perfect solution for a busy environment with high demand for hot and cold drinks.

Over 200 million visitors visit Selfridges every year. So when the iconic food hall needed renovating, only ARDEX products could achieve the speed and reliability needed for this high footfall environment which had to be ready for the public every morning.

Architectural glazing systems by Kawneer were specified as a “key aspect” of the new regional head office of British Sugar’s parent company, the FTSE 25 Associated British Foods (ABF), for their pedigree and quality.CPMG Architects selected products from all of Kawneer’s portfolio for the building on a 4.5-acre site at Cygnet Business Park, Hampton, Peterborough, which would enable the relocation of almost 400 people from ABF businesses locally (AB Sugar, British Sugar, AB Mauri, ABF Ingredients and ABF) with the addition of purpose-built conference and training facilities and a showcase central reception area. Kawneer’s aluminium AA®100 SSG (Structurally Silicone Glazed) curtain walling features on the ground floor reception, meeting/conference spaces and south-facing restaurant/café while AA®100 mullion-drained curtain walling has been used on the first and second floor open-plan offices of the three-storey building.In addition, the 5,755m2 (GIA) building features ultra-thermally efficient AA®720 doors, large (3m high by 9m wide) AA®3572 sliding doors and over-sized (2.4m by 0.7m) AA®720 parallel opening windows, all installed by approved specialist sub-contractor Norman & Underwood.

Our latest distributor story looks at how Borg & Overström’s recent innovation in point of use water dispensing, the E6, was able to meet the brief from DHL in Dubai to provide a premium, bottle-free, sustainable drinking water solution for their staff.

Union Industries, the UK’s leading manufacturer of high-speed industrial doors, has completed one of its largest individual projects with the supply and installation of 40 of its rapid-roller doors at Princes Group UK’s (Princes) food production site in Long Sutton. Having supplied Princes with more than 100 high-speed industrial doors across seven of its sites since 2010, Leeds-based Union Industries has installed a further 40 rapid-roller doors at its Long Sutton site near Spalding in Lincolnshire.

The creation of an ultra-modern Teaching Building as a new core to a long established school in Oxfordshire, has included the installation of custom designed and manufactured stainless steel sinks, worktops and splashbacks and other units from GEC Anderson for several of the different technical spaces.The Tudor Hall School, originally founded in 1850 by the Rev TW and Mrs Todd at a site in Salisbury, has been at its present location at Wykham Park in Banbury since World War II, while the past decade has seen some £15 million invested in ensuring the Independent Girls Boarding and Day School offers the best possible facilities.The Birmingham office of ADP Architects has been responsible for the design work on this latest project, while Clegg Construction Ltd of Nottingham was the main contractor carrying out the work. Acting as a specialist sub-contractor, GEC Anderson conducted site visits and liaised with the project team in order to ensure its custom fabrications met the schools’ health & safety as well as technical and teaching requirements. The manufacturer also worked closely with Tudor Hall’s Bursar, Neil Farquhar to ensure its site installation visits in no way interfered with the academic activities as lessons continued throughout normal term time. One of the architects involved with the project from early on commented: “The GEC Anderson sinks, work-surfaces and other fabrications were specified for the Food Technology Area as well as units for the Ceramics and Textiles rooms. The new centre opened on schedule last Easter in time for the start of the 2018 summer term and everyone involved has been pleased with the results.”A spokesperson for Tudor Hall added: “The new Teaching Centre is the largest and most ambitious addition to Tudor Hall facilities to date and sits at the heart of the school site. Designed to provide teaching spaces for the core subjects of Mathematics and English and specialist classrooms for the creative arts, the Teaching Centre transforms the teaching provision which Tudor Hall offers and we are delighted to have it operative, and we are already witnessing its impact.” Since its formation in 1962, GEC Anderson has built its reputation for the supply of top end stainless steel sinks and sanitaryware on a combination of innovative design, top quality materials and expert craftsmanship. In addition to the company’s Decimetric system of cabinets, sinks, drainers and other equipment - widely specified for sectors including health and catering – it is able to create custom engineered solutions to exactly fit any space or specification.

The Medical Assessment Unit (MAU Ward) was having continuous issues with its old countertop water boiler. Due to excessive scale damage it was repeatedly out-of-use and the taste of the water it dispensed was increasingly unpleasant. Kevin Ferguson, Assistant Practitioner on the ward, was on the look-out for an alternative drinking water solution.

Leading high street retailer Marks & Spencer knows that a happy workforce makes for happy customers. The modernisation of staff catering areas in stores required replacing traditional drink machines with instant hot water taps for greater efficiency and general staff wellbeing.

FIREFLY ZEUS Lite™ Safeguards Ceiling Spaces Across Wakefield Food WarehouseForming a fresh element to the UK’s critical food supply infrastructure, a new distribution warehouse in Wakefield, West Yorkshire, is near to completion with the specialist suspended ceiling installer making use of ZEUS Lite™ 90:30 from the range of TBA FIREFLY™, to create vertical fire barriers at intervals within the roof-space across the footprint of the building.The 15,300m2 facility at Headways in Stanley, on the outskirts of Wakefield, has been built by GF Tomlinson for the Kitwave Group, a national distribution business with a fleet of over 500 vehicles supplying hotels, restaurants and many other venues across the country. The installation of the ZEUS Lite™ was undertaken by Nottingham Suspended Ceilings, as the sub-contractor well experienced with the performance and user-friendly characteristics of the Firefly range.All the rolls of ZEUS Lite™ 90:30 material and the well proven FIREFLY™ fixings, including stainless steel staples and fire-resistant adhesive, were supplied to Nottingham Suspended Ceilings by the merchant, Minster On-line.The site agent for Nottingham Suspended Ceilings, Mark Prescott, commented: “Our company carries out commercial contracts right across the East Midlands and beyond, where we have made use of Firefly barriers on a large number of past projects. Although you have to be a competent contractor and follow the manufacturer’s guidance precisely, we find the ZEUS Lite™ and other products in the FIREFLY™ range straightforward to install. In the case of the warehouse here, we have now completed the installation of the fire barriers up to roof level in dozens of locations across the building; as well as installing all of the suspended ceilings throughout.”FIREFLY™ ZEUS Lite™ is ideally suited to this type of application, comprising a flexible woven fabric fire barrier that has been specifically developed for the vertical separation and compartmentation of extensive concealed spaces within buildings.By offering 90 minutes integrity and 30 minutes insulation, FIREFLY™ ZEUS Lite™ 90:30 exceeds the minimum requirements regarding fire barriers under the Building Regulations’ Approved Document B (Fire Safety). The specially treated glass fibre fabric is strong and resilient as well as flexible while, crucially, the system’s certification covers the inclusion of service penetrations; which many alternative products do not.

When the client was looking to create a refreshed, dynamic and flexible workspace for its employees, the design team chose Milliken's Per Contra and Northward Bound modular carpet to create a calm and sophisticated interior. As carbon neutral products, the projects sustainability objectives were also achieved.

Sherwn-Williams demonstrated what technical assistance can be provided on projects before any quotations or specifications are organised. A low viscosity primer Resutop Binder was recommended as a penetrating primer to case harden and consolidate the screed. Epoxy screed repairs were installed where required to make good any damaged areas. Once a sound substrate was established Resuprime MVT moisture tolerant primer was installed incorporating a fabric mesh over all joints and pitted areas to reduce any potential cracking of this substrate, followed by 9mm thick FasTop RS69 polyurtehane screed.

Nestle, one of the world's largest food companies in the world opened a new production facility in Indonesia. The facility will help strengthen Nestlé's position in the emerging markets of health-conscious consumers in Indonesia. The factory will produce infant cereals, chocolate malt drinks and milk powder.

Edinburgh based football club, Heart of Midlothian Football Club (Hearts FC) is a city institution and its Tynecastle stadium is classed as a ‘must-visit’ destination for any football-mad tourist. The recent multimillion pound redevelopment has seen it undergo a major transformation to ensure visitors have the most memorable and safe experience possible.It’s no surprise that football fans want refreshments while at the stadium, so the concourse houses a number of food and drink kiosks around the ground. Something that can be found at each and every kiosk is an Instanta InstaTap – and with 30 new machines purchased as part of the refurbishment programme, that takes the total up to 50 so far.“We originally started using Instanta about three years ago”, comments Graeme Pacitti, head of hospitality and catering operations, “after the competitor product we were using back then just kept breaking down. We looked around for a replacement and narrowed it down to two products, but went with Instanta because we liked the idea of being with a British manufacturer. It means if we do need to contact the team, it’s very quick and efficient.” Graeme is impressed with not only how the Instanta products work, but also how well they fit in to the kiosks. “We have both under-counter and counter-top water boilers, and they fit the compact space very well, but still deliver the high volumes we require on match days. They also look good and are extremely reliable.” Ben McCosh of Arumba Coffee, who supplies the stadium with its catering machines, adds: “The Instanta machines deliver what they promise. Match days are hectic, with a lot of pressure on the refreshment kiosks, but the water boilers don’t let the team down.”

Anchor is England’s largest not-for-profit provider of housing and care for people  in later life, committed to providing homes where people love living in later life. This not-for-profit organisation serves more than 65,000 residents in 54,000 homes across almost 1,700 locations and operates in more than 85% of local councils in England.Deep rooted within the company values are robust initiatives aimed at providing the highest level of nutritional standards to the residents to support overall health & wellbeing. Comprehensive water hygiene inspection regimes are put in place to minimise risks and they continually seek new opportunities to reduce their environmental impact through reuse and recycling schemes.Committed to fulfilling their sustainability initiatives, Anchor partnered with BRITA VIVREAU and invested in premium drinking water solutions across multiple locations, bringing filtered, refreshing, clean drinking water for both it’s residents and staff. Based on business and residents’ needs, Anchor opted for different BRITA water dispensers across their care home sites – the versatile Top Pro is situated in waiting rooms and corridors and the powerhouse Fill model in the kitchen canteen, allowing for bottle-filling for residents in room, and keeping guests and staff hydrated. Additionally, BRITA’s signature Extra C-tap installed in the kitchen caters to hot & cold water requirements for their staff and residents.By being plumbed-in water dispensers, the care home could not only save money and use space more efficiently, without having to compromise on patient care, but this also encouraged round the clock access to fresh and hygienic purified drinking water, thanks to the powerful BRITA ThermalGateTM solution.Noel Finnegan,National Catering & Hospitality ManagerAnchor Hanover Group"To us, being sustainable means providing residences that people love living in. Sometimes maintaining an environmental policy in a healthcare setting can come with certain challenges and uncertainties, but our recommendation would be to start by taking small steps. Investing in a water dispenser program has been an easy way for us to reduce our carbon emissions, as we no longer have to worry about the logistics involved with handling, storing or recycling bottled water. We knew we needed to move away from our unreliable and expensive pre-bottled water process and the BRITA water dispensers helped us achieve that."