"cooker"

The Wilberforce Trust is a charity dedicated to helping and empowering those with sight and hearing loss and impairment in the York and North Yorkshire area to live fulfilling and independent lives. The Trust had tenants in community based supported housing and family homes around York but wanted to deliver an innovative ‘extra care’ housing scheme designed especially for people with a visual impairment and other disabilities; the first of its kind in the area.Wilberforce House offers 30 one-bed, open-plan purpose-built, self-contained apartments along with a Living & Learning Zone – providing education and leisure activities – a courtyard cafe and offices for the Trust itself, all set in four acres of accessible landscaped gardens, including a large sensory garden. The apartments utilise smart home and assistive technology personalised to their lifestyle needs.A consultant was employed to review the development’s plans with regard to fire safety. His report included recommendations for additional fire safety measures including the ability for cooker hobs to be switched off by an alarm, as kitchen fires are a significant risk with 50% of all accidental house fires starting in the kitchen. WHY THE FIRECHIEF KITCHEN STOVE GUARD? The initial solution proposed was costly as it meant hob alarms would need to be hard wired into each apartment’s fuse board. Damian Pocknell, Head of Housing, Facilities & IT at the Wilberforce Trust recalled having seen and read about the Firechief Kitchen Stove Guard and realised that this would be much more cost effective. The fire consultant agreed and subsequently signed off on the Kitchen Stove Guard as the approved solution.  

Stainless steel work tops and sinks from GEC Andersons Made-to-Measure (M2M) range have been installed in the kitchen of a newly renovated Grade II listed Georgian terrace to provide a striking and contemporary contrast to the historical setting of the property.The five storey dwelling is situated in the beautiful and unspoilt Myddleton Square in the Angel district of London. Built between 1824 and 1827, the square is named after Sir Hugh Myddelton, who was the engineer responsible for bringing a fresh water supply into the city.The sympathetic renovation work was carried out to a very high specification, incorporating as many of the original features as possible.Renovation specialists Fullers (Builders) Ltd were asked to undertake the work. Many aspects of the refurbishment project were bespoke including the new kitchen, situated in the basement, designed by Butler Hegarty Architects and created by Fullers in-house joinersGEC Andersons M2M bespoke range is not only highly flexible but also is of very high quality. It was therefore ideal for this part of the project.The brushed satin stainless steel sinktop 4374x615mm was specified, with specially sized sink and drainer area, including (500x400x200mm and 180x400x200mm) sink bowls. To complement the worktops, stainless steel splashbacks were incorporated into the design including socket cut-outs. For ease of installation, the sinktop was mounted on a waterproof substrate, sound deadened and plastic protected.Central to the kitchen is the stainless steel bridge island worktop (1482x623mm) that includes a bin-chute with a flush-fit lid, for easy rubbish disposal. The sides of the island are integral and therefore manufactured and supplied by GEC Anderson in one piece with the worktop. They include cut-outs for sockets. There is a stainless steel panel at the back of the island, against which the range cooker stands. Stainless steel plinth kick plates are included throughout the kitchen.Gary Butler of Butler Hegarty Architects said, We recommended stainless steel to our clients and it suited their aims for the kitchen. We particularly liked the all in one surface and the general crisp aesthetics which the material created against the historic setting.

The fit-out of a new primary school building in North-West London has featured the installation of half a dozen different configuration of high quality stainless steel work-surfaces within its teaching, staff and family areas, specified for their durability and visual appeal as well as the creation of hygienic, easy to clean and maintain facilities.The Edith Neville Primary School in Camden has been built by Orpington based Neilcott Construction for the London Borough of Camden with Hayhurst and Co. Architects leading the design team. Project Architect, Jamie Wakefield, commented: “I had seen GEC sinks on another project and we specified them as part of a full Stage 4 design for the Edith Neville Primary School, which has been built for the London Borough of Camden. Schools inevitably get some very heavy usage, but with stainless steel it is easy to clean the surfaces up and get them looking smart again and they’ll still look good in ten years’ time. The different GEC fabrications feature throughout the new school as classroom art sinks, tea-point countertops and in spaces such as the family centre. There is also one in the staff kitchenette and a special studio space. We’re very pleased with how they look and they are working well for the school.”The many and varied units supplied by G. E. C. Anderson include a total of 16 in varying sizes from 1440mm long x 600mm deep and up to 3073mm long x 650mm deep, all with flat surfaces for food preparation and stacking dishes, including ten units supplied with one full size sink and six with a full sink together with half sink, plus three with cut out for cooker hobs, while 300mm high splashbacks- again in stainless steel, help prevent water or waste material staining or damaging the walls. The tops also incorporate five different edge details for such purposes as preventing water run-off.Since its formation in 1962, GEC Anderson has built its reputation for the supply of top end stainless steel sinks and sanitaryware on a combination of innovative design, top quality materials and expert craftsmanship. In addition to the company’s Decimetric system of cabinets, sinks, drainers and other equipment - widely specified for sectors including health and catering – it is able to create custom engineered solutions to exactly fit any space or specification.