"architectural metalwork castings"
3,351 results found
Relevance
Showing 37-72 of 601
ASF Ground Compass, Leeds Station / Brewery Wharf
Architectural Street Furnishings part of WB White Foundry
ASF manufactured this large cast iron ground compass as a feature piece for the new South Entrance and Waterside Development at Leeds Station/Brewery Wharf. It required 17 individual patterns to be made, so the 17 castings from that would build up and make the complete disc of the ground compass, approximatley 3m in diameter. Ductile SG Iron was used in the casting to ensure the ground compass would remain undamaged even if driven over. The finished product has been left unfinished to oxidize and patina over time.
Hannover Buildings, Manchester
Architectural Street Furnishings part of WB White Foundry
ASF were approached to repair, renovate, refurbish and where necessary remake and replace the ironwork elements of a grade 2 listed stair baluster at the Hannover Buildings, Manchester. Initially a complete baluster rail was brought into the ASF pattern shop and used as a template to make a complete new pattern for the balusters that needed fully replacing. Following a thorough survey of the staircase, totalling 16 flights in 2 blocks over a number of floors, component repairs were also completed so that we could carry out modular replacements where possible, thus retaining as much of the original stair baluster as possible. All replacement parts, including complete baluster castings, were made from 100% recycled cast iron
ASF 3 Rail Quayside Post - Southport
Architectural Street Furnishings part of WB White Foundry
ASF supplied this 100% recycled cast iron post for an extensive project in Southport. Ranging from footpath areas to the seafront the scheme includes an inland wetland and an area of parapet. Supplied with galvanised rails and the whole job finished in a satin dark blue this post and rail system really stands outThe incredible longevity of the 100% recycled cast iron means that these posts have a lifespan in excess of 100 years
ASF Bronze Sign Posts
Architectural Street Furnishings part of WB White Foundry
Solid cast bar bronze posts for mounting signs. Can be in a range of bronzes, brasses and gunmetals. Finished self coloured, polished or waxed and toned. A range of heights and diameters are available
Ockbrook
Canal Architectural
Canal were approached to manufacture and install an exclusive feature staircase for a private residence in Derby. The Cantilever staircase structure was manufactured in mild steel and features American Black Walnut box treads with a laminated glass balustrade.The upper floor featured structural glass balustrading with a stainless-steel slotted handrail that connected to the staircase structure. The handrail was fully welded, satin polished and featured a floating balustrade. The treads underneath the staircase featured strip lights to create ambience and blended perfectly with the contemporary and minimalistic features of the property. The client commented that the finished structure ‘looked superb and was pleased with the overall result’At Canal Architectural we take on board all specification requirements to ensure that the finished staircase design is functional, practical and aesthetically pleasing. The Canal site team worked closely with the contractor to ensure smooth fitting in line with current UK building regulations.
THE CURVE
Metalline Architectural Fabrications
News that The Curve in Slough has won an LABC award in the “Best Public Building” category, has delighted Metalline who supplied a wide range of architectural aluminium fabrications on the project. At the heart of a £450m regeneration scheme, The Curve is Sloughʼs premier cultural centre. Now complete, it houses a new library, café, museum, performance venue and learning rooms. The iconic project features a bespoke cladding system curved on plan and in section. The complex geometry involved to the North, East and West elevations meant that Metalline were involved from an early stage with contractors Colorminium, who took responsibility for the detailed design and delivery of the full building envelope. Once Colorminium had specified their requirements for the project to Metalline, the architectural aluminium was supplied promptly and to the exact measurements and detailing. The bespoke cladding system features a range of Metallineʼs curved and straight fascia panels, Secret Fix soffits and curved Secret Fix hook on Unity rainscreen panels complete with welded studs to the rear and curved carrier system. All panels and soffits were finished in a polyester powder coated RAL 9006 metallic silver finish to give the building a modern and high quality appeal. Metallineʼs aluminium rainscreen cladding now has CWCT certification which has provided architects and specifiers with limitless possibilities for their projects enabling them to use unique and elegant rainscreen designs.
ASF Quayside 3 Rail Post and Rail, Southport
Architectural Street Furnishings part of WB White Foundry
ASF were chosen to supply the 3 rail quayside post for the Marine Lake reserve in Southport, and area of waterside walks, gardens and leisure activities. The ASF quayside posts are manufactured from 100% recycled cast iron (made for used car brake discs), with rails from 275 carbon steel.The incredible longevity of cast iron (expected lifespan in normal use in is excess of 100 years even if left unpainted), means that these posts will be serviceable as quayside posts for generations to come.
Vents Any Colour
Cast Iron Air Brick Company
Take one look at our website and customers would be forgiven for thinking our grilles are only available painted in one colour - black.
They can of course be supplied bare metal to go rusty in many cases as another option but black is our standard colour.
That said we supply vents and air bricks painted in a huge range of RAL colours.
These cant be ordered direct from the website and there is an additional cost but they can be turned around in a week or so.
Please email for more details
Kings Cross Triplets - Contractor: Maylim Limited Kings Cross Triplets cast Gunmetal bespoke floor plates The Kings Cross Triplets also known as Gas Holders 10, 11 & 12
AATi (Antislip Antiwear Treads International)
Decommissioned in the late 20th century and the Triplets have now been restored and currently reside in their new home north of Regents Canal, facilitating new studio apartments.
For the new renovation, it would have been a shame not to include any cast metal components, which have been deeply imbedded into London’s habitat over the years. AATi were on hand to deliver Cast Gunmetal SN30/60 anti-slip stair nosings along with curved Gunmetal anti-slip Floor Plates as pictured right. These Floor Plates suit the external radius of the Gas Holder Triplets.
Broadmarsh Car Park & Interchange - Architectural Façade
Maple Façades
Aluminium and Equitone rainscreen cladding, cast glass panels, terracotta tiles and vertical aluminium fins give the new 1,200-space multi-storey a bright and modern look. In fact, it’s hard to believe the building (which also houses a new bus station) is really a car park. “There were a few challenges, which Maple addressed really well – ten out of ten for communication,” said Galliford Try’s site manager, Tom Wright. “When you look at the finished product, it’s all been worthwhile. The mix of feature fins, laser-cut and terracotta panels looks great – very close to the architect’s impression.”
Royal Albert Hall - Alumasc Apex Heritage Cast Iron
Alumasc Water Management Solutions
The Royal Albert Hall in the heart of vibrant west London is distinctive for its unique circular architecture and Victorian styling, and famous for bringing a wealth of high-brow art and culture to the city since it opened in 1871.A building such as the Royal Albert Hall is not only a building, but part of the heritage of its surrounding community. For this reason, the Royal Albert Hall Grade One Listed and meaning all proposed renovation works must meet strict regulations put in place to ensure the preservation and respectful enhancement of the building.Sir Robert McAlpine were awarded the overall contract to deliver a programme of upgrade, renovation and refurbishment work. So, when it came to replacing the original water management systems that had been in place since it’s opening, the challenge was on to find a manufacturer and installer that would bring the Hall the best products possible that were also in keeping with these requirements.Gutterworks, an Alumasc approved installer, installed Alumasc Rainwater management systems during the refurbishment in 2018. Alumasc was chosen for its ability to analyse and precisely recreate the original gutter and pipe mouldings that were used in the originally installed systems, therefore contributing to the preservation of the historic building. Over ten years ago, Alumasc Rainwater management systems were installed in a similar project at Kings Cross St Pancras Station.
30 Brown Street
3v Architectural Hardware Ltd
Architect/Designer: PRPLocation: ManchesterProject Overview: 30 Brown Street is a four-storey brick office building originally built in 1985. The brief was to retain and refurbish the building to provide circa 50,000sqft of adaptable contemporary workspace. ServiceFull hardware scheduling & bespoke finishProject DetailsThis exciting design in the heart of Manchester steers away from using traditional finishes such as stainless steel or brass and instead incorporates a bold use of white RAL9010 PPC ironmongery. Architect David Sharpe explains why‘The building has a lot of exposed raw finishes, including concrete soffits and grey terrazzo flooring, partly inspiring the name, CORE (also referring to the location in the heart of Manchester's office core). Doors and main structural elements were painted a very dark grey to provide a clear contrast with the concrete structure. The inspiration behind the choice of white ironmongery was to provide a high quality counterpoint to the darker raw exposed concrete and painted finishes, and any small part metalwork - eg the lighting, brassware and glazed partition framing, were also specified to be white to match.The contemporary interior was a key ingredient for the brief and although we started with the concept of a mixture of grey and white ironmongery to work with the overall feel of the building during our close work with the architect this was pulled back to a predominantly white scheme with grey pull handles being used for fully glazed doors to create greater contrast and to fulfil the contemporary brief.The choice of specific ironmongery took into account the desire for a minimalist aesthetic, relating to the choices in lighting and brassware.’To find out more about this project visit www.prp-co.uk/project/30-brown-street.html
Cleggford Bridge Parapet Refurbishment
Architectural Street Furnishings part of WB White Foundry
Part of an 1885 Ashlar Dressed Bridge widening and strengthening scheme, the listed Victorian Parapet required uplifting, repairing and refitting. ASF's unique position of having our own on site foundry, pattern shop, casting engineers and metallurgists meant we could complete this task using traditional techniques whilst managing to retain about 75% of the original damaged parapet railing.
Bartlett School of Architecture
Anderson, GEC Ltd
GEC Anderson stainless steel worktops were specified in the complete refurbishment of the Bartlett School of Architecture in UCL's Bloomsbury estate. A series of Teapoint worktops and splashbacks feature prominently across several levels in the Hawkins\Brown project.
CMS
3v Architectural Hardware Ltd
Architect/Designer: MCM ArchitectureLocation: Cannon Place, LondonProject Overview: New office fit-out for Top-10 global law firm CMS, open plan environment with shared cellular support. Scope included a complete ironmongery package for all new full height timber and glazed doors.ServiceFull hardware scheduling & Bespoke Design.Project DetailsTo help create an outstanding quality to CMS' new innovative law office 3v worked closely with MCM architecture to develop a full hardware specification that worked with their simple, clean design.Across the 3 large floors there are a mixture of door types, full height timber doors provided by Dealerward alongside Optima double and single glazed doors. Our experienced team co-ordinated all requirements for each door working closely with MCM and both door manufacturers throughout the design and construction process. With client experience being central to this design, ironmongery was chosen from the high end of our Vieler range including tailor made pull handles to suite the full height glazed doors.We are delighted that this project has been awarded the British Council for offices (BCO) Award for Fit-Out of Workplace 2016 for the london and South-East region.
Yew Tree House
Canal Architectural
Canal Architectural were approached to design a bespoke staircase for the homeowner of a luxury apartment in the Liverpool area. The property owner worked closely with the Canal technical sales team to design a contemporary staircase that provided access to the upper balcony area of the apartment.
The final result was the design and supply of a minimalist Cantilever staircase. The intelligent piece of engineering anchored in at only one end, allowing the the protruding construction to overhang. Finally, dark stained oak treads were added to the Cantilever structure in line with latest design trends of natural and urban finishes.
ASF Bexhill Post and Rail, Bexhill on Sea
Architectural Street Furnishings part of WB White Foundry
HTA Architects designed the Next Wave scheme to renovate the seafront and public realm surrounding the Grade 1 listed modernist De La Warr pavilion. The CABE Seachange Funded project which aims to make the area a more attractive place for residents and visitors to Bexhill, and a catalyst for economic regeneration of this seaside resort.When Bexhill on Sea needed a new barrier for the seafront promenade, Architectural Street Furnishings (ASF) was contacted to look at the project.For harsh coastal environments, ASF would typically advise the use of cast iron products, however the client brief requested the barrier was constructed from aluminium, in a design that was sympathetic to the architecture of the De La Warr pavilion.Aluminium is not renowned for being particularly durable in coastal environments. To ensure the barrier would withstand the environmental conditions over time, ASF had the aluminium hard anodised.The anodising process involved the immersion of aluminium in a bath of sulphuric acid (an electrolyte) and running a low voltage electrical current through the bath. Normal anodising results in a thin coating of aluminium oxide (rust) on the surface of the material, hard anodising is achieved by cooling the solution to freezing temperature and increasing the amount of electric current that is passed through the bath.Hard anodising produces a much thicker coating of aluminium oxide, rendering the finished material only a few hardness points below diamond and protecting it against harsh environments such as the salt at the coast.The client agreed the simple clean lines of the design and a machined aluminium cap was added to finish off the modern and stylish barrier.The finished result is a low maintenance, minimalist seafront barrier that will not pitt or corrode over time. The use of anodised aluminium enabled the client's brief to be matched without the need for compromise.
QUARTERMILE
Metalline Architectural Fabrications
Metalline have been involved with the Quartermile project from it’s very beginning, producing high-quality aluminium fabrications from building to building. The project is due to finish in 2019, and Metalline are continuously providing a variety of products for the remainder of the development’s lifespan. Quartermile is a development in the heart of Edinburgh, located on the site of the former Victorian Royal Infirmary. Neighbouring the University of Edinburgh and famous Meadows Park, Quartermile is one of the most sought-after pieces of land in the Scottish capital. Development over the last 10 years has seen the UNESCO world heritage site transformed into an iconic piece of Edinburgh architecture. Metalline’s aluminium products feature heavily throughout the Quartermile development, most prominently with our specified Feature Beam and copings. The innovative production department was able to manufacture deep Feature Beam pressings through a combination of press braking and routering techniques. The coping profiles also provided challenges as they were particularly large with complex corner details, of which Metalline were able to assist at the design stage and manufacture the products to exact specification.
Ruthin Art Trail
Architectural Street Furnishings part of WB White Foundry
ASF were approached by artists Lucy Strachan and Fred Baier who had produced conceptual drawings of laser cut tree grilles. Alongside these drawings was a brief that the guards should fit with invisible fixings into the ASF 303 cast iron tree grille. ASF took these concepts forward and produced a set of tree guards that met the needs of both the artistic concept and the required practical applications. The guards were first laser profiled and then rolled to the desired diameter. The guard halves then had to be hand fettled and blended so the pattern carried perfectly through 360 degrees.
The School of Architecture and Built Environment
Schlüter-Systems Ltd
The School of Architecture and Built Environment (SoABE) is the latest addition to the University of Wolverhampton’s investment in a new super-campus at the site of the former M&B Springfield Brewery, now transformed into a magnificent venue for learning and research.
Albert Dock Bollards - ASF 104
Architectural Street Furnishings part of WB White Foundry
ASF have for many years supplied these bollards for the Albert Dock area of Liverpool. Supplied in 2 different sizes - some to the standard pattern dimensions and some to a larger bespoke dimension the bollards are set up both as stand alone and with chain and chain eyes to form chain barrier systems.Manufactured in 100% recycled cast iron, and 100% recyclable and with an expected lifespan in excess of 100 years, these bollards are ideal for such a valuable and historic site
Connah's Quay, Flintshire. ASF 5 Rail Quayside Post and Rail
Architectural Street Furnishings part of WB White Foundry
ASF manufactured and supplied the ASF 211 5 Rail Quayside Post System for the above project. Sited on a raised plinth, the baseplate option was chosen. The client decided that all the rails were to be the same diameter - in this case 48mm. The rails were grouped on the lower part of the posts to reduced the risk of 'roll through' into the water and as such increasing the safety for children and young people at the waters edge. The posts are 100% recycled cast iron and are 100% recyclable. Cast iron can be recycled indefinitely with no loss in property. Posts were hand finished in zinc rich metal primer and ASF metal shield top coat. Rails were left galvanised which offers a pleasing contrasting effect.
ASF 128 Bollard / Step Unit Handrail
Architectural Street Furnishings part of WB White Foundry
ASF's 128 pattern cast iron bollard was used in this project as the post for a bespoke step unit. One side of the steps was fixed to a set of railings (also by ASF) by a core fixing directly to the bollard upright. The handrails themselves were bespoke manufactured mild steel, galvanised rails, with steel side mounting brackets made to mechanically fix into the ASF 128 Bollards.
ASF Morrisons Logo Bollard and Railings
Architectural Street Furnishings part of WB White Foundry
ASF have for decades been supplying the supermarket chain Morrisons with a host of external furniture and fittings. From the very beginning ASF were specified as manufacturers for the M Logo Cast Iron Bollards, still in use today on their heritage stores. In this example the bollards were converted into railings, allowing the supermarket retain their corporate branding whilst creating a site perimeter. ASF are also specified on the stainless steel and recycled plastic products seen at Morrisons stores.
Where historic and modern architecture collide
Formica Group
Whilst good design is about creating a balance between aesthetics and functionality, great design evokes emotions. Historic architecture and interior design represent a place in time that people connect with; a historic building has charm whilst modern designs have the ability to inspire.
MODERN PEARL IN THE HEART OF HISTORIC BRUGES
Hunter Douglas Architectural
Hunter Douglas Architectural supplied the steel interior ceiling and aluminum exterior ceiling for the new conference center (BMCC) in Bruges
KENSINGTON ALDRIDGE ACADEMY
Metalline Architectural Fabrications
Designed by architects Studio E, the BREEAM Excellent rated building features over 2,000 Ultima aluminium insulated panels in varying lengths and depths up to 4500mm and 800mm respectively, finished in four different RAL colours The company also supplied a range of ventilated Bird’s Beak style panels, pressings, copings and cills that further added to the overall aesthetic of the building’s façade. The Ultima aluminium insulated panels were designed, supplied and manufactured by Metalline Architectural Fabrications. Metalline has become one of the UK’s leading fabricators of specialist architectural fabrication in the UK, developing innovative solutions for a range of flagship projects. Finished in four different RAL colours – reed green, pastel green, light green and mint turquoise – the overall effect of the multi coloured, multi-dimensional panels is one of inspiration that sits perfectly with the ultimate goals of the Academy’s vision for its pupils future. Metalline’s Ultima aluminium insulated panels are extremely versatile and possess excellent acoustic, thermal and fire performance ratings. They are typically produced using class A1 non-combustible insulation core and can be adapted to fit a variety of facade details, which include the ability to be glazed into a standard curtain walling or structural glazing system. The panels can also be perforated and manufactured into a variety of shapes to meet the most challenging design criteria. Ultima aluminium insulated panels can be fabricated up to an impressive 6000mm in one length.
ASF 107 Post and Rail: Temple Quays (and surrounding areas), Bristol
Architectural Street Furnishings part of WB White Foundry
ASF have supplied this area with 100% recycled cast iron post and rail for many years. From the historically popular 2 rail ASF 107, which is essentially as adaption of the ASF 107 bollard also used in the area, to bespoke post and chain, access control, and for Temple Quays a taller, bespoke 3 Rail version.100% UK manufacture in 100% recycled cast iron giving an almost everlasting product (expected lifespan of iron, even when uncoated, is in excess of 100 years in normal use), this product offers both a stylish and highly practical solution. The flexibility of the product and it's versions offered by ASF means that moving forward we can meet the needs of future developments, irrespective of and minor or major design amendments.
ASF Stowe Balustrade Railings, Great Portland Street, London
Architectural Street Furnishings part of WB White Foundry
These railings were used on a roof terrace and lower floor balcony area. On the roof section the standard root fixed version was used, and a bespoke side mounted version manufactured for the lower floor balcony. These posts were cast in ductile SG iron to that they met and surpassed all loading requirements.
1 VALENTINES PLACE
Metalline Architectural Fabrications
Number One Valentine Place is a new grade A office building and winner of the 2013 New London Architectural Award for an office building. The external façade of the property features a range of aluminium pressings, glazed in Ultima aluminium insulated panels and Feature Beam, Metalline’s renowned aluminium beam, along with fifty aluminium fins specifically designed to offer solar shading for the building’s south facing position. All pressings and panels were finished in a specialist blue grey anodised finish where Metalline’s superior application and expertise are becoming renowned with architects and contractors throughout the UK.
Potterrow Student Accommodation
Senior Architectural Systems Ltd
Located within easy distance of the University of Edinburgh, this six-storey development provides 52 studio apartments for the city’ vibrant student community.Designed by Yeoman McAllister, the stone clad building complements the existing architecture of the area, while the high-performance aluminium fenestration package from Senior Architectural Systems provides a modern and compliant solution.Senior’s thermally-efficient SPW600e aluminium windows, installed with Louvre Guards in front of the opening lights, have been used throughout, combining a robust and secure construction with slim frames to frame far-reaching views of the city and ensure effective levels of daylighting. The main and communal areas benefit from Senior’s slimline SF52 aluminium curtain wall system and low U-value PURe® Commercial Doors.Senior worked closely with main contractor Clark Contracts and fabricator partner GG Glass to deliver the scheme which has received wide praise for the quality of its accommodation and convenient links to several of Edinburgh’s main university campuses.
Mid Calder Fish Pass
Architectural Street Furnishings part of WB White Foundry
ASF worked with AECOM and Barhale Construction for the new fish pass and viewing platform at Mid Calder, Livingstone. A standard base plate version of the ASF Buckden 2 Rail post was used, manufactured in 100% recycled cast iron, for the fish pass itself offering a safety barrier for Scottish Water and fish pass technicians when accessing the riverside area. A bespoke version of the posts were manufactured for the viewing platform that were supplied as a panel post with vertical infill bars so that the public can view the fish pass. A matching lockable gate with vertical infill was also manufactured to link the viewing platform and the fish pass itself.
ASF Birkenhead Quayside Railings
Architectural Street Furnishings part of WB White Foundry
ASF were approached to manufacture and supply a quayside post and rail system for the old docks on Birkenhead, as part of a regeneration project. The client didn't want the traditional curved cast iron post option, nor the usual version of the same but in stainless steel.ASF worked with the client to agree a design that combines a robust steel panel, bolt fixed to the dockside with a large diameter stainless steel handrail on top. Sections were both straight and curved and panels were bespoke manufactured for each section of the dock.The outcome is a striking, cranked quayside panel system that has the clean straight lines of a contemporary product but still works remarkably well in this regenerated industrial landscape
ASF 4 Rail Quayside Stainless Steel Post and Rail, Swansea
Architectural Street Furnishings part of WB White Foundry
ASF Quayside post is available in cast iron, steel and stainless steel. On this project stainless steel was used with a 4 rail set up. The project included not only straight runs, but it took in some complicated topography and a Norwegian Gate that was a very difficult manufacture, but which looked and worked great in the end
Paddington MSCP - Architectural Façade
Maple Façades
We’d never heard of the Williamson Tunnels in Liverpool. Now they’re truly ‘etched’ on our minds, thanks to an innovative architectural façade design. More than 2,000 perforated panels clad the car park with a design that represents the network of 200-year-old tunnels beneath Liverpool’s streets and rainscreen cladding on the stair core protect against the elements.“The façade looks great,” said Morgan Sindall Construction’s Senior Quantity Surveyor, Graham Golding, who singled out Maple for praise during what was a challenging build. “We had the Covid pandemic, weather issues, little bespoke changes and a myriad of other problems but Maple fitted in. Accommodating is the word I would use – they were one of the best (contractors) on site.”
Reproduction Victorian Posts, Roker Pier, Sunderland
Architectural Street Furnishings part of WB White Foundry
ASF were approached with a well weathered post dating back to the mid 1880's with the hope that we could use this post to reproduce the originals. Resins and moulds were taken from this post and a new pattern produced, from which over 600 individual posts were cast and used in the renovation of the Roker Pier in Sunderland. ASF's on site foundry and pattern shop means that heritage jobs such as this can be taken on and completed using many of the original skills and techniques that were utilized when the first posts were made.
Showing 37-72 of 601