"emergency fire shutters barriers"

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

Stainless steel worktops, by GEC Anderson, were deployed in the refurbishment of the mess room at Roath Fire Station in Cardiff. The kitchen units were supplied by Steelplan Kitchens.The continuous, high quality, stainless steel worktops provide a highly professional look and feel to the busy area within this important emergency facility. The requirements of hygiene, durability and safety are met by the worksuraces that feature integrated sink bowls as well as upstands to walls.

The Milton Keynes Hospital Paediatric Emergency Department was undergoing a refurbishment. The overall aim was to create a child-friendly environment that would appeal to children of all ages. AD Architects designed the new unit and chose Altro Orchestra to create two colourful, reception play areas. The variety of different shades and textures gave scope for an enchanted woodland forest theme to be created using Altro Orchestra throughout. Altro Suprema safety flooring was also fitted in the new unit’s observation areas, treatment bays and examination rooms.

IWA 14 Terra 180 Swing Barriers, PAS 68 Compact Terra Barriers and PAS 68 Static Terra Venus Bollards at Spitalfields Market Bishops Square, Spitalfields, adjacent to the Old Spitalfields Market is located in the historic heart of East London, on a site that has had a market for over 350 years. Spitalfields offers an opportunity to experience this wonderfully authentic London area that is home to contemporary brands and innovative Street Food independents, all set against the backdrop of a world-famous City skyline.

Lang+Fulton products were used extensively at The Emirates Stadium for Arsenal FC as barrier fencing, security screening, balustrading and wall cladding. The Arezzo-25 fence panels with a 76x25mm aperture were supplied with the flat bars running horizontally in order to take a loading requirement of BS6399 – 1:1996. This guaranteed its suitability for use as a barrier fence for the crowd control areas surrounding the Emirates. Alternative fixing methods combined with the versatility of the panels created continuity of design throughout the varied applications within the project.

In our first in a series of case studies, we’ve invited FireDNA Alliance Partner, Steve Neilson to share his experiences using the FireDNA system to inspect and catalogue 9422 fire doors in three months, on behalf of Mitie, for the Scottish Fire and Rescue Service.The Scottish Fire & Rescue Service is the fourth largest in the world and ensures the safety and wellbeing of the people in Scotland. Operating out of 547 buildings across 357 sites, these centres are managed by the UK’s largest ‘Facilities Management’ provider Mitie.Following several months of discussion between Mitie and the Scottish Fire & Rescue Service regarding the status of the fire doors across their property portfolio, a tender was issued for an extensive fire door inspection and evaluation programme to be undertaken.Having secured the works through competitive tender, we further engaged with Mitie and the Scottish Fire & Rescue Service team. Working through their property asset registers in detail we gained a full understanding of the scope and requirements of the project.Following weeks of detailed project planning and final agreement on the timeline, it was evident that we had just over 3 months to inspect and report our findings on 9422 fire doors across the 357 site locations, and this all had to be done during the winter months of late 2021 and early 2022.In order to deliver on such a tight timescale, absolute dedication and collaboration was required from all parties…the project managers, admin staff and fire inspectors as well as the teams at Mitie and Scottish Fire & Rescue Service. To support this challenging task we armed our resources with a new cloud based system called ‘FireDNA’.We had been approached by FireDNA a couple of years earlier to see if we would be interested in helping to beta test their new ‘Fire Door Inspection and Monitoring Software’, to which we agreed, little did we know at the time that this software would prove invaluable to us further down the line!Deploying teams of up to 10 Fire Inspectors at a time, armed with the new and now completed FireDNA Inspection and Monitoring App, we set about working through the phased inspection schedule.Having been involved in the development testing of the FireDNA software, we had no doubt this system would, increase the speed in which the surveys were carried out, and dramatically reduce the time and effort in reporting the findings. Working closely with the FireDNA software support team, who assisted us in the initial software training, our Fire Inspectors were able to work efficiently and effectively ‘at pace’ through the challenge. The FireDNA App also has ‘LiveChat’ built in so any questions or queries by our operatives in the field were easily and quickly dealt with by the FireDNA team, which meant there was very little downtime during the inspection process.One of the great benefits of using the FireDNA App is that everything is ‘real-time’ so our office-based project managers could immediately see how the inspections were progressing. Once the inspection data and supporting photography was in the system report generation was largely automated and nicely formatted into MS Word and Excel documents.These reports could then be initially shared internally with our remedial work/replacement estimators for accurate cost estimates, who in turn could then produce accurate cost estimates and quotes for the works required as each buildings inspection was completed. This created a very fast, efficient and accessible workflow process for the whole team.FireDNA is not only a fantastic fire inspection and reporting tool, but also initiates the ‘golden thread’ of information, allowing building owners and managers like the Scottish Fire & Rescue Service and Mitie to take ownership of the ‘live data’ in the system, which can easily be updated and shared as each fire door asset is inspected, monitored and maintained year-on-year, which will soon become the minimum legal requirement.FireDNA also enables building owners and facility managers to create status reports for O&M compliance, which can be shared with insurers and the like, as well as appointing contractors and maintenance teams to carry out and catalogue remedial works and new installations, which are all date-stamped and locked into the system.In our view, anyone involved in fire inspections, installations, planned preventative maintenance and asset recording of passive fire products, such as fire doors, doorsets and fire screens should be using the FireDNA system. For duty holders such as building owners, facility managers, landlords and surveyors to make sure the assets they are responsible for are safe and compliant and the data unambiguous and accessible by all that need it, including residents.We believe FireDNA is the best system on the market and anyone who uses it will appreciate not only the time and money savings but importantly how this centralised system improves work standards across the full lifecycle of passive fire products. Steve Neilson – FireDNA Alliance Partner – Scotland

Breezefree screens are used to provide a protective barrier, and regularly changing signage at the world-renowned Royal Observatory, Greenwich. As one of London’s top tourist attractions, the historical Royal Observatory, Greenwich hosts thousands of visitors every year at its stunning location and vantage point within Greenwich Park. The bronze planetarium cone needed a screen system on its outside perimeter to discourage visitors from touching the structure, which occasionally becomes hot in the sun...

Compartmentation, Protected Means of Escape and Boundary Protection were all required as part of the fire safety solutions and therefore Coopers FireMaster fire curtains and Coopers FireMaster Plus2 fire curtains were installed to ensure the fire safety requirements were met. In total, 113 fire curtains were installed, 96 with round headboxes and 17 with square headboxes. Round headboxes were engineered for The British Museum as a request from the architects. The headboxes of the fire curtains were going to be seen by the occupants so Coopers engineered a round headbox that looked in keeping with the design of the building.

DRU gas fires and a Spartherm wood fire were specified by Ethos Construction and DRU dealer Grate Expectations for Harford Manor, a country house in Holyport, Windsor. They selected the fires for their ‘A’ energy ratings. This included the DRU PowerVent extended flue system for flexibility of location. In addition, the gas fires can be operated using the DRU Eco Wave app for tablets and smartphones. Ethos project manager Niten Mistry said: ‘The fires were selected for their impressive performance and ease of installation. They also contribute to the high quality of the property.’ www.harfordmanor.com, www.grateexpectations.com,

Lymm Fire Station was completely unique project; it was new-build station that doubled up as an educational centre. It had all kinds of different environments and scenarios built-in to give visitors the ability to learn what to do in various emergency situations. As such, they wanted to include a Changing Place facility in the new building. We’ve been working with the Changing Places campaign for a long time, and we were able to design a fully-compliant facility complete with a wall-mounted X-Y hoist system. Read all about it on our website.

A record number of manual call points were maliciously activated across England for the year ending March 2022.The highest annual number of malicious false fire alarms on record came as people returned to public buildings en masse in a period markedly unaffected by COVID-19 lockdowns.The latest Home Office figures reveal there was a total of 3,212 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England for the year ending March 2022, surpassing challenged hoax calls as the largest reason for malicious fire alarms.Accidental activations also increased over the period; 14,452 false fire alarms were recorded due to the accidental and careless activation of life safety equipment, including manual call points.Every false alarm is costly, disrupting schools and businesses, placing unnecessary strain on our emergency services and reducing public confidence in fire alarms.Despite online learning, working from home and limits on social contact, false fire alarm numbers, although down, persisted during the pandemic.As schools, offices and shops saw reduced attendance and footfall, malicious false fire alarms survived; now in a post-COVID world, there has been a boom in the number of false alarms plaguing the country.Continuing to be the largest incident type, false fire alarms accounted for 40 per cent of the incidents attended by Fire and Rescue Services in England for the period – fires accounted for just 26 per cent.Repeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude toward evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and as a result, fails to react appropriately in an emergency.Safety Technology International manufacture a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From integral covers to outdoor and sounder models, there are now variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon and break seal acts as a deterrent against malicious activation.In Wales, malicious false fire alarms rose by 33% to 426 during 2021-22, the highest figure for half a decade. And with similar figures reflected across the UK, over £1 billion is lost every year due to false alarms.To recoup this cost the London Fire Brigade became the first fire service in the country to recover costs from buildings like hospitals, airports and student halls with a poor false alarm record.Firefighters respond to fire signals as if they are real, this exposes the public and fire crew to unnecessary risk in their swift response to false alarms, directing them away from real emergencies.Under The Regulatory Reform (Fire Safety) Order Act 2005, it is the responsibility of the building owner or the “responsible person” to ensure effective fire precautions are in place to protect staff, customers or visitors.Several precautionary steps can be implemented to prevent false fire alarms before they occur; routine testing and maintenance of call points is a must to ensure proper operation, but it is not the only proactive approach.As recommended in BS 5839-1:2017, manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b), that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”

The Scottish Fire and Rescue Service (SFRS) have announced their new policy on Unwanted Fire Alarm Signals (UFAS) that came into effect at the start of this month.The policy affects all calls to the fire control operators who will confirm a fire before the incident requires the fire service to be dispatched.Scotland have a continuously high rate of false alarms attended by the Scottish Fire and Rescue Service, with over 57,000 unnecessary journeys a year. This is why the new policy adopts a ‘call challenge’ policy to reduce the number of false fire alarms attended by the service.False fire alarms cause disruption in various ways, from impacting the time and resources of fire and rescue services, implicating people’s safety and harmfully impacting the environment. False alarms are also costly procedures, not only for the Fire Service but also businesses where the false alarm takes place.These UFAS have many detrimental effects:They impact on resources available to attend real fires.They impact on time available for other valuable work, such as training and community safety activities. Where fire crews comprise on-call (retained) fire fighters, the crews may be unnecessarily taken away from their place of work.They impact on road safety, as a result of fire appliances travelling under emergency conditions.They impact on the environment from the number of appliance journeys. The new guidance on safe investigation of unwanted fire alarm signals aims to challenge calls to confirm fire or signs of fire in order to ensure resources and time are being used effectively. However, the SFRS will continue to attend calls received from automatic fire alarm systems and if the signal has been initiated by a manual call point (MCP), heat or smoke detector or sprinkler system, in premises in which people sleep. There will also be fire service attendance in non-sleeping risks if there is physical signs or technological indication of a real fire, such as the fire alarm signal triggered by a manual call point.Although the policy will significantly reduce the number of false alarms attended by fire crews, there is still more to be done to decrease the vast number of unnecessary call outs.Protective covers from STI help to reduce both malicious and accidental activations of manual call points, available in various sizes, mounting options and custom text available to suit all applications. The tough polycarbonate covers have been specifically designed to help deter false alarms and prevent vandalism of various devices. The range of Call Point Protectors are highly effective without restricting legitimate operation of the devices, meaning they are easily accessed in emergency situations.For more information on the new policy, visit the FIA website here: https://www.fia.uk.com/news/guidance-on-safe-investigation-of-fire-alarm-signals-in-scotland.html?utm_source=Fire%20Industry%20Association&utm_medium=email&utm_campaign=14001136_June%202023%20MMU

Crossrail’s new station at Abbey Wood has been built over the railway tracks where the Elizabeth line terminates. From above, the building is shaped like a manta ray, its ‘wings’ extending into canopies sheltering staircases either side which swoop down to platform level below.Stretto-22 Soffit PanelsThe soffit panels for the staircases and elevated walkways were made from Stretto-22 pressure-locked grating, customised to a bespoke 66x22mm aperture to provide an enhanced level of visual screening. Each panel was exactly contoured to match the demanding serpentine shape of the footbridge canopies.Torino-22 Barrier FencingBarrier fencing was made for the platforms from Torino fence panels which were customised and engineered with a heavy intermediate framing bar at the loading point to comply with Network Rail’s specified requirement.DeltaBox-70 Louvred ScreeningStorage areas beneath the stairs were secured with DeltaBox-70 louvred screening panels.Torino-11 and Stretto-11 Protective Screens Lang+Fulton also supplied a Torino-11 screen to protect the overhead lines and track from the threat of thrown objects.An alternative access to the station was enclosed with a Stretto-11 anti-projectile screen.

The existing ornate and decorative features of the hotel, meant that the fire curtains needed to integrate with the existing parts of the building that were remaining. This included a four sided, marble clad atrium in one of the main entrance halls, which covers two floors. There were four fire curtains installed around the first floor of the atrium therefore reinstating fire separation between floors. Fire curtains offering up to 3 hours fire resistance were also installed in the new hotel kitchens, preventing fire from spreading from kitchen areas to the public dining rooms and bar.

Good Hope Hospital set up plans for a new Paediatric emergency department to help care for their youngest patients.  Horsley Hube Architects Ltd jumped at the chance to specify YewdaleKestrel® products which were installed by our clients, Just Fabrics. With safety in mind, anti-ligature products were chosen for the cubicle tracking (K100 Curtain Divider Track), curtain tracks (K6200 Window Curtain Track) and window blinds (KVL31 Premium profile wand operated vertical blinds) with grey Dart PVC fabric. Read the full case study for more information.

Building contractor Eversley Building Services Ltd required a roof access ladder for emergency use in the event of a fire. However, the application constraints presented many challenges, in particular the small skylight aperture. As such, a particularly compact loft ladder was needed. Furthermore, because the loft ladder would be used during an emergency, it had to be easy-to-operate and safe for its occupants. Read more about this challenging project and how the Piccolo Premium provided the ideal solution...

CRT Flooring Specialists Ltd have used UltraFloor’s latest product innovation, Level IT Hydra Bond, to install 800sqm of vinyl flooring at Warrington’s £4.3 million Emergency Department extension.BackgroundLeading infrastructure and building specialists, Tilbury Douglas, have been appointed by Warrington and Halton Teaching Hospitals NHS Trust to complete the £4.3 million Warrington Emergency Department extension.The much-needed investment will increase capacity, improve patient care and modernise facilities.The ChallengeHigh performance products that would work quickly and withstand the constant and heavy trafficking of hospital staff, patients and medical equipment were critical to the success of this project.The SolutionFollowing a bespoke site specification completed by UltraFloor’s Technical Training and Site Support Manager, Martin Pouncey, CFA members and expert flooring contractors, CRT Flooring Specialists Ltd, used DPM IT, Prime IT Multi-surface Primer and Level IT Hydra Bond to complete the 800sqm installation.DPM IT is a two component, solvent free epoxy resin system for use as a surface damp proof membrane. Designed to provide protection against subfloor moisture, DPM IT has a pot life of 45 – 75 minutes, a cure time of 5 hours and boasts a 98% RH floor moisture tolerance.Formulated to promote adhesion to all UltraFloor smoothing underlayments, Prime IT Multi-surface Primer reduces pinholing, minimising the risk of costly failures. With a coverage rate of 200m² at 3:1 dilution, Prime IT multi-surface Primer is a must-have product for all flooring installation projects.Once fully dried, UltraFloor Level IT Hydra Bond was applied across the 800sqm area. Level IT Hydra Bond is a ground-breaking, water based floor leveller that can be applied to bitumen and adhesive residues without the need to prime.Level IT Hydra Bond is a super polymer modified smoothing compound which utilises UltraFloor’s unique technology – a process which enhances application and boasts unrivalled flow properties. What’s more, each bag of Level IT Hydra Bond also contains 20% recycled material.In addition, Level IT Hydra Bond can receive bonded floor coverings after 4 hours, has an extended working time of 45 minutes for optimal usability, and is moisture tolerant and protein free.ResultsOn the performance of UltraFloor Level IT Hydra Bond, Richard Martin, Office Manager at CRT Flooring Specialists Ltd, commented: “It’s fantastic. Flows really well.”The vinyl flooring installation was completed on time and the remaining extension work is continuing as scheduled.

Gradus supplied stair edgings, barrier matting and carpet to the New Look Support Centre at the Weymouth Gateway development. Committed to retaining its local presence and historic links with Weymouth, fashion retailer New Look underwent regeneration of its Mercery Road site as part of the Weymouth Gateway development. The purpose built New Look Support Centre is a modern three-storey building located at the entrance to the development. The finished look is one of clean modern elevations, substantially glazed to maximise the use of natural light and make the most of the spectacular view from upper levels.

False fire alarms have risen by nearly 16% in just 6 years at NHS trusts across England; stretching resources, unsettling patients, and disrupting vital healthcare.Figures from NHS Digital reveal there were 19,566 false fire alarms at NHS trusts throughout 2020/21, with some trusts recording upwards of 500 false alarms.The worrying results reveal that both in the past year and historically, several patients have sustained ‘injuries during evacuation’, highlighting the damaging effects of an unnecessary evacuation.With appointments cancelled, operations delayed, and a fall in emergency department attendances during the period, we might have expected to see the number of false fire alarms fall significantly during the pandemic.At a time where it is vital to avoid the crowded corridors and large gatherings at assembly points that follow an evacuation, it has become even more pertinent to eradicate the causes of false alarms ensuring a socially distanced environment for vulnerable patients.Of the 19,566 false alarms 5,742 resulted in a callout, firefighters respond to all alarms as if they are real. This exposes the public and fire crews to unnecessary risk in their emergency response to unwanted fire signals, directing them away from real emergencies – threatening to place added pressure on the NHS.Across the 216 NHS trusts listed within the data, a total of 1,175 genuine fires were recorded.False alarms cost businesses and Fire and Rescue Service authorities an estimated £1 billion a year in the UK. In order to recoup this cost, the London Fire Brigade became the first fire service in the country to recover costs from hospitals with a poor false alarm record.A false alarm is a fire alarm signal caused by means other than a genuine fire, which has activated a fire detection and alarm system, these can include: equipment false alarm, environmental influences, accidental damage, and inappropriate human action, including the malicious activation of a manual call point.As recommended in BS 5839-1:2017 manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”This is supported by fire safety guidance set out by the Department of Health which outlines the importance of “initiating measures to reduce false alarms and unwanted fire signals,” such as “the provision of lift flaps, or lift flaps combined with a local alarm device [which] are sufficient to control the possibility of undesirable actuation by patients.”Safety Technology International manufacture a range of protective covers, from integral covers to outdoor and sounder models; there are variations to suit all applications. These covers are specifically designed to prevent false alarms whether accidental or malicious.The Call Point Stopper is a protective cover ideal for areas with a risk of accidental activation, such as hospitals and healthcare facilities. The polycarbonate cover does not restrict the legitimate operation of vulnerable call points and helps distinguish a fire call point from a green electronic door release – often located nearby, this is a common cause of false alarms.Fire crews recently attended a false fire alarm at the Royal Blackburn Hospital after a discharged patient broke five break glass call points. If there is a history of malicious activations whereby patients or visitors intentionally activate the fire alarms, causing unwanted evacuations and disrupting important healthcare, the Euro Stopper offers a solution.The Euro Stopper provides a tamper-proof cover featuring the same sturdy UV-stabilised polycarbonate housing as the Call Point Stopper with the useful addition of an optional integral sounder and glow-in-the-dark frame. The 96 dB sounder emits a piercing alarm when the cover is lifted drawing immediate attention to the area, acting as a pre-alarm in a real emergency.If further robust protection is still required the Universal Stopper provides IP56 protection from the elements, with a tough outer dome or low profile cover strong enough to withstand the severest of knocks from hospital beds, trollies, or wheelchairs. An optional sounder and break seal acts as an additional deterrent against malicious activation.Conforming up to IP66, the Enviro Stopper offers the same protection against both accidental and malicious activation whilst guarding against ingress in harsh environments, such as wet rooms or wash down areas.

The Coopers FireMaster®, closed rectangular Concertina fire curtain is a perfect solution when requiring fire compartmentation around a staircase as it offers a virtual firewall creating a lobby once the curtain has been deployed with more than 2 hours integrity. The innovative Concertina fire curtain installed at Aldgate Tower fully encapsulates the staircase from the 11th to the 12th floor in the event of a fire. The curtain is triggered by either the fire alarm system or a local heat or smoke sensor and is automatically deployed from the ceiling to the floor.

To create safe and hygienic entrances at the new £65m Balfour Hospital in Orkney, architects specified INTRAform DM with a combination of inserts. The state-of-the-art rural general hospital serves the entire 21,000 strong population of the islands. With a traditional need for shelter against extreme weather conditions, a robust entrance matting system is essential to ward against slips. To create an effective barrier, the multiple entrances at The Balfour Hospital use a combination of fibre and rubber inserts within a single aluminium recessed system.

Upgrading the fire protection within potentially vulnerable roof spaces has been a highly important aspect of the wider refurbishment and improvement work being undertaken at a mental health hospital in Nottinghamshire, with TITAN Lite™ being specified to provide both integrity and insulation, in combination with other products from the range of TBA FIREFLY™.As a highly experienced specialist installer and long-term user of FIREFLY™ products, DC Fire Protection Ltd. has installed hundreds of metres of the TITAN Lite™ 120:60, as well as the Collaroll and a total of 13 fire-rated access doors: 10 measuring 1200 x 600mm, plus a further three of the smaller, 600mm square versions, offering a 120 minute fire integrity rating.Established in 2015, DC Fire Protection works right across the country covering multiple sectors of the construction industry, installing active as well as passive fire protection systems.A Director of DC Fire Protection, Daniel Mabbott, commented: “We have been dealing with FIREFLY™ for a number of years, including buying large quantities of the TITAN Lite™ and APOLLO Lite™, which we use for commercial contracts as well as other work. While we often propose the use of FIREFLY™ systems to clients, in this instance the TITAN Lite™ 120:60 had already been agreed by the client – in consultation with FIREFLY’s own consultant and specified by another fire safety specialist for who we are sub-contracted. We have a very good working relationship with FIREFLY™ whose technical team are always ready to come to site to offer advice on issues which arise or to provide a bespoke detail. We also rely on them to give our operatives the training required, up to the appropriate level. In this case the installation work is fairly straightforward, also using the Collaroll to protect penetrations to the main barrier.”Installation work was successfully completed to schedule in September and DC Fire Protection Ltd. is now preparing to begin an even larger installation contract at the Ashfield Hospital also in Mansfield.FIREFLY™ TITAN Lite™ 120:60 has been developed as a flexible fire barrier to provide compartmentation of larger concealed spaces within different types of buildings including factories, warehouses, healthcare facilities and even railway stations.By offering 120 minutes integrity and 60 minutes insulation, TITAN Lite™ 120:60 exceeds the minimum requirements relating to Fire Barriers as detailed in the UK Building Regulations: Approved Document B (Fire Safety). FIREFLY™ is manufactured using specially treated woven glass fibre fabrics.

Coopers installed and commissioned two FireMaster® Plus fire curtains, the first to protect the property from fire and smoke migrating from the kitchen whilst the second to protect the internal balcony from smoke and fire travelling between floors. Both fire curtains provide 2 hours fire and insulation zone protection and were installed into the ceiling to remain hidden from view until deployed by a fire alarm.

How to incorporate a fire or stove installation into a self-build project.By Niall Deiraniya, UK general manager, DRU FiresAlways ask for the fireplace specification at the design stage. Modern gas fires and wood stoves require careful planning in order to work as part of the general home heating system.Gas, wood or other fuels?Decide which fuel type best suits your home. Modern gas fires have realistic flame pictures and are much more energy efficient than older models.Wood stoves and fires also have greatly improved energy efficiency due to Ecodesign regulations. The only downside is that there is much more work involved with buying and storing the wood and cleaning the stove after use.Both gas and wood have room sealed options. This means that no air from inside the home is used for combustion and all waste emissions are expelled outside, resulting in clean burning and high efficiency.Finally, sustainable fuels such as Bioethanol produce a very attractive flame picture, burn cleanly with no smell or emissions and are available in a large selection of design formats. Built-in or freestandingIf you are converting a house with an existing chimney, you may wish to retain the chimney, to incorporate a more modern fire. Conventional flue gas fires are designed to fit seamlessly into standard chimneys and require minimal building work. The chimney will almost certainly need sweeping before installation and the fire may require a chimney liner for essential safety.Most wood fires are also designed for chimney installation and make full use of the air circulation properties to provide visually attractive and energy efficient fires. You can either elect for a basic ‘insert’ fire, which matches the dimensions of a Class 1 chimney or a widescreen model, which will require some structural changes.Freestanding stoves are very popular, as they offer greater flexibility of location and provide dramatic room features. They are available in gas, wood or bioethanol and generally need a flue connection to an outside wall or through the roof. No chimney optionsContemporary balanced flue gas fires are designed to be installed without a chimney, so you can incorporate them almost anywhere in a self-build project. However, they still need to be specified at the earliest possible stage. A typical installation will require the fire to be flued through an outside wall, with the flue concealed behind a false chimneybreast. Fires can be located in room-dividing walls and other architectural features so they can be seen from both sides. You can also enjoy fires in kitchens, bedrooms, loft conversions and many other places. These types of installations are made possible by extended, fan-assisted balanced flue systems. They allow for multiple fires to be placed in larger properties, with the flues hidden in crawl spaces and other discreet areas, terminating on the roof.In conclusion, the secret to having attractive and energy efficient fires and stoves in any self-build project is design, plan, cost and implement. And always consult a fully qualified Gas Safe or HETAS engineer.For further information visit www.drufire.com

The roof space to an existing commercial property in the North-West of England has been given the added protection of having its very large roof-space sub-divided using the APOLLO Lite™ 30:30 system manufactured by TBA FIREFLY™.

Every false fire alarm is costly, but in a post-COVID world, there is now even more pressure on the leisure, retail, and hospitality industries to prevent false alarms in their premises.The leisure, retail, and hospitality industries were hit hard by COVID-19; as we begin to emerge from the pandemic businesses will be keen to make up for lost time, avoiding the loss in revenue caused by false fire alarms.Home Office figuresDespite two years of restrictions and lockdowns, false fire alarms continue to cost the UK, Home Office figures reveal that there were a total of 2,497 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England for the year ending September 2021 – surpassing challenged hoax calls as the largest reason for malicious fire alarms.Accidental activations too remained a significant cause of false alarms; 12,732 false fire alarms were recorded due to the accidental and careless activation of fire alarm and fire-fighting equipment, including manual call points.With the restrictions, closures, and reduced footfall faced by businesses, we might have expected to see the number of false fire alarms fall significantly during the pandemic. This serves as a timely reminder of the persistence of unwanted fire alarm signals, and the need for leisure, retail, and hospitality premises to seek a solution to avoid further disruptions post-COVID.Although necessary once a fire alarm sounds, a preventable evacuation ultimately means unhappy customers, disruption for businesses, and unnecessary strain for our stretched emergency services.At a time where it is prudent to avoid the crowded corridors and large gatherings at assembly points that follow a needless false alarm evacuation, it has become even more important to prevent false alarms.Continuing to be the largest incident type, false fire alarms accounted for 41 per cent of the incidents attended by Fire and Rescue Services in England for the period – fires accounted for just 27 per cent.Over £1 billionWith similar figures reflected across the UK, over £1 billion is lost every year due to false alarms. To recoup this cost the London Fire Brigade became the first fire service in the country to recover costs from buildings including leisure, retail, and hospitality premises, with a poor false alarm record.A false alarm is defined as a fire alarm signal caused by means other than a genuine fire, which has activated a fire detection and alarm system, these can include: equipment false alarm, environmental influences, accidental damage, and inappropriate human action, including the malicious activation of a manual call point.Under The Regulatory Reform (Fire Safety) Order Act 2005, it is the responsibility of the building owner or the ‘responsible person’ to ensure effective fire precautions are in place to protect staff, customers, or visitors.Several precautionary steps can be implemented to prevent false fire alarms before they occur; routine testing and maintenance to call points is a must to assure proper operation, but it is not the only proactive approach.BS 5839-1:2017As recommended in BS 5839-1:2017 manual call points should be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b, that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”Following the introduction of the new recommendations in 2017 malicious false fire alarms have fallen by 18%, an indication of the effectiveness of protective covers, however, every false alarm is still costly.Firefighters respond to fire signals as if they are real, this exposes the public and fire crew to unnecessary risk in their swift response to false alarms, directing them away from real emergencies.LeisureLeisure premises are particularly susceptible to false fire alarms, whether it be wayward sports equipment in sports hall and gymnasiums, or high-traffic areas in music venues, cinemas, and theatres.Concerts, football matches, and even pantomimes have all been interrupted mid-performance in the UK, and in some cases even cut short by false fire alarms – resulting in disgruntled fans and calls for refunds.Government fire safety guidance for theatres, cinemas, and similar premises, highlights the need for protective covers to combat both accidental and malicious activations: “To reduce the risk of malicious or accidental operation which may promote panic you should consider as part of your management plan alternative arrangements such as the guarding of manual call points (e.g. with a simple, easily removed, cover).”A hinged cover around a call point is also likely to solve the problem of accidental activation or damage in storage areas where there is a continual movement of equipment.Whilst guidance for open air events and venues draws attention to the high risk of malicious activations in certain public areas, such as large beer tents – in this instance, alarmed call point covers might be more effective.RetailFor retail premises, trollies and shopping bags threaten the accidental activation of manual call points and the evacuations that follow threaten both a loss of customers and profit. However, robust polycarbonate covers can be fitted to protect sensitive break glass units and deflect heavy blows.This is reinforced by the Government’s fire safety risk assessment for shops: “False alarms from electrical fire warning systems are a major problem (e.g. malicious activation of manual call points) and result in many unwanted calls to the fire and rescue service every year.”Shopping centres and supermarkets are regularly forced to evacuate hundreds of shoppers due to unwanted fire alarm signals; abandoning their shopping on conveyor belts, baskets, and trollies. Owing to the disruption many choose not to return to complete their purchases.HospitalityThis phenomenon can be particularly detrimental for the hospitality industry, where evacuations following false fire alarms leave restaurants and bars vulnerable to incidents of “dine and dash.” Some hospitality premises have lost out on upwards of £1,000 when customers walked off without paying after a false alarm.Fire safety guidance for licensed premises reinforces the need to put a stop to false fire alarms within the industry: “Fire alarm systems should normally conform to the current edition of BS 5839, with consideration made for prevention of false alarms.”Alarm fatigueRepeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude towards evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and as a result, fails to react appropriately in an emergency – having potentially fatal effects.The Manchester Woolworths fire in 1979 is a devastating example of alarm fatigue, as the fire alarm sounded customers were reluctant to leave the store. By the time they realised they were in danger, it was too late, ten people died in the blaze.Alarm fatigue also poses a serious threat to the hospitality industry, with Government fire safety guidance for sleeping accommodation, such as hotels, stating: “If there are excessive false alarms in your premises, people may become complacent and not respond correctly to a warning of a real fire. In such circumstances, you may be failing to comply with fire safety law. All false alarms should be investigated to identify the cause of the problem and remedial action taken.”In some areas of hospitality premises, such as function rooms in a hotel, call points can be vulnerable to malicious and accidental activations – to reduce this risk, protection for manual call points is advised.Some hotel guests react casually to fire alarms, often wrongfully believing them to be a “hoax” or “prank”, reducing response time and delaying evacuation. As recommended in BS 5839-1:2017 manual call points can be fitted with a protective cover preventing false alarms whether accidental or malicious, halting alarm fatigue.Call point protectorsSafety Technology International manufacture a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From integral covers to outdoor and sounder models; there are now variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon, and break seal acts as a deterrent against malicious activation.As we enter transition to the “new normal” it is imperative the leisure, retail, and hospitality industries prevent false fire alarms in their premises. Conforming to BS 5839-1:2017 to protect manual call points from false activation, whether accidental or malicious. Not only to aid economic recovery post-pandemic but to keep fire safety at the forefront of customers’ minds. Failure to address false fire alarms allows alarm fatigue to manifest, and this can prove to be costly – in every sense of the word.

Bioethanol fires require no chimney or flue, give off no harmful emissions and are 95% energy efficient. They are available in a large selection of designs for living rooms, kitchens, bedrooms, bathrooms and gardens. A good example is the home of Bury resident Anthony Norman, who chose an Italian kitchen and a British made bedroom from local dealer Icon, both featuring table-top bioethanol fires. Anthony and his family were convinced that they would make exciting additions to their new kitchen and master bedroom. Ebios bioethanol fires are made in Germany and distributed by DRU in the UK.

Coopers innovative FireMaster Plus2 fire curtains was also used to create tenable zones as the product offers both integrity and radiance performance. The use of all the fire curtains allowed the open plan design of the museum to be realised by offering fire compartmentation and boundary protection. A total of 20 Simplex and Duplex FireMaster Horizontal fire curtains and 110 FireMaster and FireMaster Plus fire curtains have been installed in the museum by Coopers Fire UAE partners, Dosteen Doors.

Fully certified products from the range of TBA FIREFLY™ have been employed to protect a potentially vulnerable roof-space above a doctor’s surgery in Chingford, Essex, ensuring any outbreak of fire could not spread to other parts of the building. The work on the property owned by Peabody Estate has been carried out by Wickford based T & R Fire Protection on behalf of another industry expert, LMAC Fire Systems, also from Essex. The two companies regularly cooperate on such projects as landlords continue to maintain and improve the fire safety performance of existing buildings.In the case of the Chingford surgery, FIREFLY™ Apollo Lite™ 30:30 was specified along with the manufacturer’s widely utilised Collaroll, High Temperature Adhesive and 12mm stainless steel staples. In addition to protecting the sides of the 2.8 metre high pitched roof-space, creating fire barriers and wrapping multiple beam ends with the Collaroll, T & R also installed one of FIREFLY'S Access Panel FR 120 units. These have been stringently tested against EN 1363-1 2020 and are third party certified by IFC, being shown to achieve an impressive two hours fire resistance from either side of a fire compartment. Intended to be fitted vertically, the heavy-duty construction of the Zintec steel door and unistrut frame ensures the assembly offers a tight and flush fit when closed, and robust performance in use.The Director for T & R Fire Protection, Tom, commented: “We’ve used APOLLO Lite™ and other FIREFLY™ products on many hundreds of projects in the past, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. There are many older properties which have no fire compartmentation in their roof spaces and in the case of the Chingford doctor’s surgery, the landlord – Peabody – asked us to carry out an inspection and come up with a fire strategy. We base our recommendations and design drawings on FIREFLY'S standard details and, once they’ve been approved go in and install the fire barriers. The work involves breaking the loft-space down into a number of compartments with one of the Firefly access panels providing safe passage between them. The installation has gone very well, though there is a lot more of this type of work to be done across the country in many sectors.”The APOLLO Lite™ 30:30 has been developed for use in vertical separation or compartmentation situations, offering 30 minutes integrity and insulation and is straightforward to install for an experienced contractor. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including multi-storey flats and commercial premises.

The recently renovated 'schloss Colditz' in Saxony, Germany is a great example of how to reconcile the often conflicting demands of historic preservation and fire-protection. The renovation has not just fulfilled fire-protection requirements but the planners have used extremely discreet solutions that fit with historic preservation requirements. Many of the passageways have been fitted with Teckentrup T30 all-glass doors, which combine functionality with aesthetics and maximum transparency.

The Coopers FireMaster, closed and open Concertina fire curtain is a perfect solution when requiring fire compartmentation around a staircase as it offers a virtual firewall creating a lobby, once the curtain has been deployed, with more than 3 hours integrity. A total of five FireMaster Concertinas were installed between floors 11 and 15 in this large office space. These curtains allow for the open plan flow of the building to remain as intended and prevent the spread of fire through the building whilst providing compartmentation.

Product constituents: To meet UK fire standards the Access Panels manufactured have been tested by Warrington Fire and hold a 120-minute fire rating certificate.

Coopers Fire installed a large, multi-faceted FireMaster Concertina Closed fire curtain on floor 12. The client utilising floors 12 and 13 wanted to keep an open plan feel between floors to allow a more free flowing environment for the staff. To achieve this, a bespoke staircase was designed connecting the floors. The spiral staircase was a major feature on floor 12 and meant that staff were able to move freely between floors 12 and 13 without using the lifts.

Barry Fire Station / Altro case study

Launched just in time for the Spring season, Sadolin Shed & Fence All Weather Barrier woodstain is the latest product to join the superior woodcare range – providing the perfect blend of five years’ protection, fast drying times and ease of application for specifiers. Available in five and ten litre pack sizes, Sadolin Shed & Fence All Weather Barrier woodstain preserves and protects sheds and fences and features a wax enriched water repellent, as well as UV protection, to ensure long-lasting colour from the shades available, Grey Shadow, Woodland Walk, Sylvan Grade, Cedar Red and Ebony Wood.

Coopers installed FireMaster fire curtains with smoke control over the lift door openings on each of the ground and upper seven floors and two on the basement so a total of forty eight curtains. An important part of the design of the building on the ground and first floor was to subtly integrate the fire curtain headbox and side guides into the lift opening.