wedi Nonstep Plus
Impact sound deadening board.
- For decoupling ceramic and natural stone floor coverings from the substructure.
- For deadening impact sound when laying ceramic and natural stone floor coverings with a relatively low design height.
- On all load-bearing surfaces such as concrete and wooden floorboards (not stairs).
- Underlay for floating floor coverings such as ready-to-lay parquet or laminate.
- For residential type use. Not approved for wheeled loads with high concentrated loads.
- Not for use under electric thin-bed heating elements.
Impact sound deadening board consisting of a wedi building board bonded in the factory to a rubber mat, creating an overlap. Used for decoupling under ceramic floor coverings, laminate or ready-to-lay parquet.
Features:
- Low structural height.
- Low mass per unit area.
- Simple to lay; economic way of reducing impact sound under ceramic and natural stone floor coverings.
- Quick installation.
- Stress-reducing underlay, decouples the covering from the surface.
- Impact sound improved by 16 dB.
Applications:
- For decoupling ceramic and natural stone floor coverings from the substructure.
- For deadening impact sound when laying ceramic and natural stone floor coverings with a relatively low design height.
- On all load-bearing surfaces such as concrete and wooden floorboards (not stairs).
- Underlay for floating floor coverings such as ready-to-lay parquet or laminate.
- For residential type use. Not approved for wheeled loads with high concentrated loads.
- Not for use under electric thin-bed heating elements.
| Features | Low structural height Low mass per unit area Simple to lay; economic way of reducing impact sound under ceramic and natural stone floor coverings Quick installation Stress-reducing underlay, decouples the covering from the surface Impact sound improved by 16 dB |
| Material | Bottom: Polyurethane-bonded recycled rubber material with styrofoam flakes Top: 6 mm thick wedi building board bonded to a 5 mm thick rubber mat, creating an overlap |
| Size | 1200 x 600 mm |
| Uniclass 2015 | |
| CAWS | M40/27 Intermediate substrate M40/470 Intermediate substrate |
| Product Reference | wedi Nonstep Plus |
| Accessories | Nonewedi 610 Adhesive Sealantwedi Tools Joint Reinforcement Tapewedi Tools Joint Reinforcement Tape Self-Adhesivewedi Tools Sealing Tape |
| Standard product features | Material:
Size: 1200 x 600 mm. Thickness: 12 mm. Temperature limit: -40°C to +75°C. |
| Product Options | Accessories: - wedi 610 Adhesive Sealant: Elastic water-resistant adhesive which enables equalizing adhesion and sealing of wedi Nonstep Plus boards to create a waterproof seal between boards. - wedi Tools Joint Reinforcement Tape: An alkali-resistant glass fibre reinforced fabric for reinforcing over entire board surface area when using wedi Nonstep Plus. - wedi Tools Sealing Tape: Sealing tape consisting of a TPE-coated polypropylene fleece for the secure sealing of corner, connecting and butt joints and intersections. |