NBS Source
List your products
Application

  • In publicly accessible buildings in accordance with DIN 18040–1 and DIN EN 1253.
  • In accessible dwellings complying with DIN 18040–2 (consult technical literature for details).
  • As structural sealing in combination with tile or slab coverings for load classes A0 and A.

The product can be installed on almost any surface as an individual tileable floor-level shower system. The system includes:

  • A waterproof rigid foam core with a special, resistant and glass fibre reinforced cement coating.
  • A defined and absolutely even surface slope.
  • A flat, fully integrated, standard-compliant, horizontal drain.

The product is also compatible with wedi Fundo Fino drain covers. In this case, the polyvinyl chloride (PVC) frame has to be used.

Ten year guarantee.

Description

Flush to the floor shower element for direct tiling with integrated, horizontal, standard-compliant drain. The floor element is supplied sealed ready for installation.

The shower element fulfils all relevant standards and offers an overall installation height of 90 mm.

Features and benefits:

  • The drain has been tested by TÜV Rheinland and fulfils all of the requirements of DIN EN 1253.
  • Drain capacity of 0.8 L per second.
  • 50 mm water trap height.
  • At least 1.5% even preformed gradient.
  • 100% waterproof material.
  • Suitable for all tile sizes.
  • Alongside the stainless steel cover included, wedi Fundo Fino designer grates can also be used.
  • Assured reliability due to the drain technology integrated into the waterproof blue extruded polystyrene (XPS) core.
  • Complies with all common standards and guidelines (DIN EN 1253 and EN 12056).
  • A+ rating in relation to Emissions Dans L'air Interieur.

Applications:

  • In publicly accessible buildings in accordance with DIN 18040–1 and DIN EN 1253.
  • In accessible dwellings complying with DIN 18040–2 (consult technical literature for details).
  • As structural sealing in combination with tile or slab coverings for load classes A0 and A.

The product can be installed on almost any surface as an individual tileable floor-level shower system. The system includes:

  • A waterproof rigid foam core with a special, resistant and glass fibre reinforced cement coating.
  • A defined and absolutely even surface slope.
  • A flat, fully integrated, standard-compliant, horizontal drain.

The product is also compatible with wedi Fundo Fino drain covers. In this case, the polyvinyl chloride (PVC) frame has to be used.

Ten year guarantee.

General information
Finish

resistant and glass fibre reinforced cement coating

Color

Grey

Features

Standard-compliant, flat complete system for flush-to-floor showers, with a total installation height of 90 mm

Material

A waterproof extruded polystyrene rigid foam core with a special, resistant and glass, fibre reinforced cement coating

Shape

Rectangle

Size

1200 x 900 x 90 mm

1800 x 900 x 90 mm

1400 x 900 x 90 mm

1600 x 900 x 90 mm

WarrantyDescription

available on request

Uniclass 2015
Shower trays (Pr_40_20_06_84)Primary
Specification data - Shower trays
Product Reference

Fundo Integro, floor element with fully integrated drain technology, central drain, 900 x 900 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, central drain, 1200 x 1200 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, central drain, short side connection, 1200 x 900 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, central drain, long side connection, 1200 x 900 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, offset drain, 1200 x 900 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, offset drain, 1400 x 900 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, offset drain, 1600 x 1000 x 90 mm

Fundo Integro, floor element with fully integrated drain technology, offset drain, 1800 x 900 x 90 mm

Drain grid

As standard, stainless steel

wedi Fundo Fino 1.1, stainless steel, square

wedi Fundo Fino 1.2, stainless steel, round

wedi Fundo Fino 2.1, stainless steel, square

wedi Fundo Fino 2.2, stainless steel, round

wedi Fundo Fino 3.1, stainless steel, square

wedi Fundo Fino 3.2, stainless steel, round

wedi Fundo Fino 4.1, solid stainless steel, square

wedi Fundo Fino 4.2, solid stainless steel, round

wedi Fundo Fino 5.1, solid stainless steel, square

Accessories

None

Building board

Various options available, consult literature and insert requirements.

Moltoromo

Nonstep Pro new

Various options available, consult literature and insert requirements.

Point drainage

Various options available, consult literature and insert requirements.

wedi 320 tile adhesive

wedi 520 – Sealant

wedi 610 – adhesive sealant

wedi building board XL

Various options available, consult literature and insert requirements.

wedi building board XXL

Various options available, consult literature and insert requirements.

wedi Fundo sealing set

wedi Tools joint reinforcement tape

wedi tools sealing tape

Standard product features

Technical characteristics:

– Fundo Integro (can be shortened on-site, but the geometry of the elements must be maintained):

  • Wheelchair load-bearing from minimum tile size: 50 x 50 mm.
  • Glass mosaic (thickness: 3 mm) from minimum size: 20 x 20 mm.
  • Minimum installation height: 90 mm.

– Drain:

  • Frame for the stainless steel grid: 120 x 120 x 4 mm.
  • Stainless steel grid V2A: 115 x 115 x 2.5 mm.
  • Levelling frame: 115 mm (diameter) x 40 mm.
  • Drain performance (DIN EN 1253-1): 48 L/ minute, 0.8 L/s.
  • Connection pipe (ABS): DN 50.
  • Drain capacity in accordance with (DIN EN 1253-1): 50 mm.
  • Slope connection piece: 1.5%.

– Raw foam building board systems:

  • Type: Extruded polystyrene (XPS) rigid foam core.
  • Long-term compressive strength (50 years) ≤2% compression (EN 1606): 0.08 N/mm².
  • Compressive resistance or compressive strength at 10% compression (EN 826): 0.25 N/mm².
  • Thermal conductivity (EN 13164): 0.036 W/mK.
  • Bulk density (EN 1602): 32 kg/m³.
  • Temperature limits: -50 to +75°C.
  • Fire behaviour EN 13501-1: Class E.
  • Waterproof tested to: 1.5 bar.

Product Options

Drain grid:

wedi Fundo Fino square grids are 115 x 115 x 5 mm. Round grids are 115 mm diameter x 5 mm.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2017 1 2.1
IFC
- 1 2.1
Download now from NBS National BIM Library
Literature
Similar products from wedi