weberset plus

weberset plus

Third party certifications:
  • BSI Kitemark

    BSI Kitemark

    Certificate type

Saint-Gobain Weber

A standard-setting non-slip tile adhesive for low-porosity tiles and substrates.

Jump to:
+44 (0)1525 718877

A standard-setting cement-based polymer-modified non-slip adhesive for fixing porcelain, ceramic, quarry, terrazzo and terracotta tiles and natural stone to rigid interior and exterior floors and walls. Suitable for low porosity substrates such as power floated concrete or existing tiles.

Exceeds the requirements of BS EN 12004 for C2T.

Can be primed with PR360.


Weber AD250 admixture is required when fixing tiles to wooden substrates. Not recommended for tiles with resin backs.


  • Ensure that all surfaces are clean, dry, sound and free from dust, grease or any contaminating barrier.
  • Make good any unsound areas and remove flaky or peeling layers before tiling.
  • Porous or dusty surfaces should be primed with Weber PR360 and allowed to dry before tiling.
  • Check before use that the colour of the adhesive does not cause staining or discolouration of light coloured or translucent tiles.

General information
Specification data - Cementitious adhesives

Product Reference

weberset plus






Product Options


Use on porous or dusty surfaces, allow primer to dry.

Third party certifications
  • BS EN 12004 : C2T
Similar products from Saint-Gobain Weber