Composite decking with weathered, aged oak finish.
Use Millboard decking for all standard outdoor flooring applications (e.g. in residential, commercial, education, healthcare, leisure and hospitality) including:
For all applications Millboard decking boards to be installed with a 4 mm gap between the boards and a 1 mm gap at butt ends, to facilitate drainage. There is no need for a ventilation gap to be left under Millboard decking boards. The maximum unsupported overhang for the boards is 50 mm, each cut board must be supported by a minimum of three joists. Each board must be screwed down with 2 x Millboard Durafix® stainless steel screw fixings where a board crosses a joist, and 3 x Millboard Durafix® stainless steel screw fixings at the ends of the boards.
Ground level application (soft surface):
Millboard decking boards installed over DuoSpan 99 mm Joists and Beams, Beams supported by Plas-Pro Posts concreted into the ground. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.
Hard surfaces application (roof terrace, concrete base):
Millboard decking boards installed over DuoSpan Joists, Joists supported by DuoLift joists supports onto a solid/stable base. Installed with DuoSpan brackets to the recommendations set out in installation guide found on manufacturers website.
The Weathered Oak boards need to be supported at 400 mm centres for residential applications, for commercial applications, bridges, balconies and steps this needs to be reduced to 300 mm centres.
A polyurethane resin mineral board, moulded from real oak masters, and hand-finished. Millboard decking is slip-resistant, splinter-free, anti-static and its non-porous composition makes it resistant to algae and insect infestations. UV and weather-stability, stain resistance and resistance to rotting and warping, make it a low maintenance product for use in all standard outdoor flooring applications. To be used with Millboard Durafix® stainless steel screw fixings.
Features and benefits:
Moulded from hand selected century old oak masters.
Millboard decking board is a polyurethane resin mineral board, moulded from real oak masters, and hand-finished.
Limited warranty against rotting such as fungal and mildew decay, splitting and twisting.
Residential limited structural warranty.
Commercial limited structural warranty.
200 x 32 x 3600 mm
Q55/380 Deck boards
200 x 32 mm.
Millboard Durafix® stainless steel T15 decking screws 4.5 x 60 mm.
Millboard Durafix® stainless steel T15 decking screws 4.5 x 45 mm.
Millboard Durafix® stainless steel T15 fascia screws 4.5 x 35 mm.
DuoSpan 51 mm Joist.
DuoSpan 99 mm Joist.
Plas-Pro 50 x 50 mm Joist.
Plas-Pro 125 x 50 mm Joist.
DuoLift 15-60 mm Joist Cradle.
DuoLift 20 mm Self-Levelling Joint.
DuoLift 45 mm Riser.
DuoLift 45 mm Foot.
DuoLift Acoustic Separation Pad.
DuoSpan 136 mm Beam.
Plas-Pro 100 x 100 mm Post.
To BS 7976-2:2002, 41-56 (Wet) 54-79 (Dry).
Reaction to fire
To EN 13501-1:2007 + A1:2009, Bfl - s1.
MOAT 43:1987, 0 mm.
MOAT 43:1987, 0 mm.
Resistance to static indentation (reinforced)
MOAT 27:1983, 0.1 mm.
To BS EN 438-2: 2005.
No visible change.
To BS EN ISO 7784-2:2006, 261 mg.
To BS EN 13245-1:2010.
No cracking or damage to topcoat.
Surface static resistance.
IEC 62631-3-23, 6.5E+10 Ω/sq (6.4 x 10⁹).
The top surface is a textured, resilient Lastane® layer which is chemically melded to the core and hand-tinted using 2K component pigments that resist fading and UV damage.
Flexible bullnose edging.
Country of material origin
Material origin varies however is within UK and Europe.
Country of product manufacture
Not currently recycled but upcycled and used as path edging, planters, seating and other outdoor creations. Municipal incineration of Millboard provides effective energy recovery.
Over a third of the raw materials used for making the structural core of Millboard is recycled.
© 2022 NBS Enterprises Ltd. All rights reserved.