WD2 Series outlet for inverted roof or no fines screed, vertical threaded outlet, round flat grating

WD2 Series outlet for inverted roof or no fines screed, vertical threaded outlet, round flat grating

WD222 Roof outlet, 2" BSP thread, sherardized ductile iron secured round grating

WD223 Roof outlet, 3" BSP thread, sherardized ductile iron secured round grating

WD224 Roof outlet, 4" BSP thread, sherardized ductile iron secured round grating

As drawing ___

Contractor's choice

Not required

WG501 Extension piece; cast iron, height 96 mm

WG502 Extension piece; cast iron, height 35 mm

As drawing ___

Contractor's choice

Not required

T301 Adaptor (ABS) to 3" BSP thread for 82 mm plastics pipework; threaded one end; length 140 mm

For use with WD223.

T1702 Adaptor (ABS) to 2" BSP thread for 50 mm plastics pipework; threaded one end; length 60 mm; includes solvent weld socket

For use with WD222.

T1704 Adaptor (ABS) to 4" BSP thread for 110 mm plastics pipework; threaded one end; length 126 mm; includes solvent weld socket

For use with WD224.

T1802 Adaptor (ABS) to 2" BSP thread for 50 mm stainless steel pipework; threaded one end; length 90 mm

For use with WD222. Proprietary coupling required.

WT101 Adaptor (sherardized mild steel) to 2" BSP thread for 50 mm cast iron pipework to BS 416 and to DIN 19522 (Ensign + SMU); threaded one end; length 170 mm

For use with WD222. Proprietary coupling required.

WT102 Adaptor (sherardized mild steel) to 3" BSP thread for 75 mm cast iron pipework to BS 416 and to DIN 19522 (Ensign); threaded one end; length 170 mm

For use with WD223. Proprietary coupling required (or Wade T1603 for connection to DIN 19522 pipes).

WT103 Adaptor (cast iron) to 4" BSP thread for 100 mm cast iron pipework to BS 416 and to DIN 19522 (Ensign + SMU); threaded one end; length 170 mm

For use with WD224. Proprietary coupling required.

WT105 Adaptor (cast iron) to 4" BSP thread for 100 mm cast iron pipework to BS 437; threaded one end; length 170 mm

For use with WD224. Proprietary coupling required.

WT108 Adaptor (sherardized mild steel) to 3" BSP thread for 75 mm cast iron pipework to BS 416 and to DIN 19522 (SMU); threaded one end; length 170 mm

For use with WD223. Proprietary coupling required.

As drawing ___

Contractor's choice

Not required

WH202 Underdeck clamp; mild steel

To secure outlet body to a roof deck.

WH202SS Underdeck clamp; stainless steel

To secure outlet body to a roof deck.

WH301 Bearing pan; galvanized mild steel

To spread the load over a larger area.

WG301

Bonded insulation jacket

Used to prevent condensation forming on the underside of an outlet body.

Bonded insulation jacket with trace heating

Used to prevent condensation forming on the underside of an outlet body. Consult manufacturer.

As drawing ___

Contractor's choice