WD2 Series outlet for inverted roof or no fines screed, horizontal threaded outlet, round flat grating
Cast iron body, medium sump.
Wade WD2 Series (medium sump) outlets for inverted roofs or no fines screeds. Grating level is 78–105 mm above the base of the membrane clamping collar. Grating can be further raised by the addition of extension pieces.
Material | Body: Cast iron |
Product Reference | WD2 Series outlet for inverted roof or no fines screed, horizontal threaded outlet, round flat grating |
Type | WD232 Roof outlet horizontal, 2" BSP thread, sherardized ductile iron secured round gratingWD233 Roof outlet horizontal, 3" BSP thread, sherardized ductile iron secured round gratingWD234 Roof outlet horizontal, 4" BSP thread, sherardized ductile iron secured round gratingAs drawing ___Contractor's choice |
Extension pieces | Not requiredWG501 Extension piece; cast iron, height 96 mmWG502 Extension piece; cast iron, height 35 mmAs drawing ___Contractor's choice |
Spigot adaptors | Not requiredT301 Adaptor (ABS) to 3" BSP thread for 82 mm plastics pipework; threaded one end; length 140 mmFor use with WD233. T1702 Adaptor (ABS) to 2" BSP thread for 50 mm plastics pipework; threaded one end; length 60 mm; includes solvent weld socketFor use with WD232. T1704 Adaptor (ABS) to 4" BSP thread for 110 mm plastics pipework; threaded one end; length 126 mm; includes solvent weld socketFor use with WD234. T1802 Adaptor (ABS) to 2" BSP thread for 50 mm stainless steel pipework; threaded one end; length 90 mmFor use with WD232. Proprietary coupling required. WT101 Adaptor (sherardized mild steel) to 2" BSP thread for 50 mm cast iron pipework to BS 416 and to DIN 19522 (Ensign + SMU); threaded one end; length 170 mmFor use with WD232. Proprietary coupling required. WT102 Adaptor (sherardized mild steel) to 3" BSP thread for 75 mm cast iron pipework to BS 416 and to DIN 19522 (Ensign); threaded one end; length 170 mmFor use with WD233. Proprietary coupling required (or Wade T1603 for connection to DIN 19522 pipes). WT103 Adaptor (cast iron) to 4" BSP thread for 100 mm cast iron pipework to BS 416 and to DIN 19522 (Ensign + SMU); threaded one end; length 170 mmFor use with WD234. Proprietary coupling required. WT105 Adaptor (cast iron) to 4" BSP thread for 100 mm cast iron pipework to BS 437; threaded one end; length 170 mmFor use with WD234. Proprietary coupling required. WT108 Adaptor (sherardized mild steel) to 3" BSP thread for 75 mm cast iron pipework to BS 416 and to DIN 19522 (SMU); threaded one end; length 170 mmFor use with WD233. Proprietary coupling required. As drawing ___Contractor's choice |
Accessories | Not requiredWG301Bonded insulation jacketUsed to prevent condensation forming on the underside of an outlet body. Bonded insulation jacket with trace heatingUsed to prevent condensation forming on the underside of an outlet body. Consult manufacturer. As drawing ___Contractor's choice |
Standard product features | Material: Body: Cast iron. Area drained (at head, 35 mm; rainfall rate, 75mm/h):
Load rating class (BS EN 1253): L15 (suitable for areas with light vehicular traffic). |
Product Options | Spigot adaptors: A comprehensive range of spigot adaptors is available to enable bodies with BSP threaded outlet to be connected speedily and effectively to all pipework in general use. To complete the connection a proprietary coupling may be required. Longer spigots, such as required to pass through a slab, can be made in 10 mm increments up to 1000 mm. To specify add suffix “#” and length (mm). On request, spigots may also be threaded both ends. |