A range of walkways designed to provide a level, anti-slip means of traversing roofs.
A range of walkways designed to provide a level, anti-slip means of traversing roofs – including corrugated and standing seam roof constructions – for access and maintenance.
A safety tread incorporated in the top plank provides safe footing, even in wet conditions.
WalkSafe® modular panels are manufactured, to order, from extruded PVC-U. The panels are clipped together on-site using integral fasteners. Fixing through the roof membrane is not required under normal conditions.
Health and Safety Executive recommends a minimum width of 430 mm, or 600 mm if materials are to be carried along a walkway. A surveyor’s opinion should be sought for widths greater than 915 mm for use in valleys.
When used on flat roofs, the roof deck must comply with BS 629. When used over roof waterproofing membranes, the waterproofing layer should have a minimum static indentation rating of L3, when tested to MOAT No 27:1983, to ensure sufficient resistance to damage.
As drawing ___
H43/120 Metal insulating sandwich panel
J42/485 Membrane walkway
L35/120 Duckboard system
L35/140 High level walkway system
L35/160 Working platform system
L35/340 High level walkways
WalkSafe® – Flat
WalkSafe® – Half valley
WalkSafe® – Valley
As drawing ___
Standard product features
Class 1Y to BS 476-7.
Standard Colours are white (using recycled material), silver grey (calcium zinc), and brown. Special colours are available, subject to minimum order volumes.
Standard modules are three metres long. Other lengths available to order.
© 2021 NBS Enterprises Ltd. All rights reserved.