Steel access panel for ceramic/ marble tiled walls.
Suitable for use in kitchens, bathrooms, or shower rooms where discrete access to services is required.
The 8000 Series is a range of access panels designed to accept a tiled finish up to a maximum thickness of 13 mm, ideal for use in kitchens, bathrooms, or shower rooms where discrete access to services is required.
Features and benefits:
Insert requirements (width x height).
M40/10 Natural stone covering to
M40/110 Tiling to
M40/115 Natural stone covering to
M40/5 Tiling to
Non fire rated (NFR).
To BS EN 1634-1, 60 minutes (1FR).
Sizes are manufactured to order. Consult manufacturer for further information.
With Tiled Frame (TF) panels, specified sizes refer to the actual door leaf size. Sizes should be calculated using the Tiled Door Specification Sheet. Exposed Edge Frame (EEF) sizes refer to the overall frame size.
(EEF): Suitable for use when tiles are being cut to fit within the panel, or when access is required into a wall which has already been tiled. Cut edges of tiles are concealed by the perimeter of the door or frame.
(TF): To be installed into walls which haven’t yet been tiled, to give a fully concealed finish. Ideal for use when full tiles are applied to the door face, with the gaps between frame and door lining through with grout lines on the surrounding wall.
Zintec steel door tray.
(MP). As standard.
Glass reinforced gypsum.
Latch or lock type
(BL). Operated by an 8mm square drive key.
(PC). Push to open, push to close operation for a completely flush finish.
(SL). Operated by a castellated key for better security.
8000 Series Tiled Access Panel
Powder coated matt.
Full rubber EPDM seal.
ALTA 3000 - Access Panel
ARIA 5000 - Access Panel
ECHO 7000 Series Access Panel
IMAGE 2000 - Access Panels
IMAGE 2000 Series Plastic Access Panel
INTEGRA 4000 Double Door - Access Panel
INTEGRA 4000 FR Series
INTEGRA 4000 Quadruple Door - Access Panel
INTEGRA 4000 Quintuple Door - Access Panel
INTEGRA 4000 Single Door - Access Panel