UHQGRC

Application

Suitable for use in sealed joint cladding, open joint rainscreen cladding, 3D architectural dressings, coping elements and landscape garden features.

Description

High quality glass fibre reinforced concrete cladding elements.


Features and benefits:

  • High flexural strength and durability when compared to typical glass reinforced concrete (GRC) materials.
  • GRCA Equivalent Grade 21P.
  • Provides the appearance of natural stone (at a lower weight).
  • Fire-resistant.
  • Available in a range of facing coats to provide an appearance similar to architectural pre-cast concrete. Facings coats have a high compressive strength and low water absorption. All facing coats are developed in UKAS accredited testing facilities to ensure validated compatibility with GRC mixes.
  • Meets/ exceeds the most onerous requirements of BS EN 1169 (General Rules for Factory Production Control of GRC), GRCA Specification for Manufacture, Curing and Testing of GRC and PCI MNL-130-09 (Manual for Quality Control for Plants and Production of GFRC Products).
  • Manufactured under a BSI accredited Quality Management System to ISO 9001: 2015.
  • Full UKAS accredited testing to ISO 17025: 2017.
  • Combines high characteristic flexural strengths at yield and ultimate failure levels with enhanced durability.

General information

Color

Range of facing coats available.

Finish

Pre-finished

Material

Cement-based

Cement based composite manufactured from white cement, silica sand, admixtures and additives reinforced with NEG alkali resistant glass fibre.

Shape

Can be produced into a range of shapes dependent on project requirements, rectilinear or multi curvilinear are possible.

Size

To suit project requirements, panel sizes ranging from approximately 1–20 m².

Uniclass 2015

Pr_25_71_14_35 Glass-reinforced concrete cladding unitsPrimary

CAWS

H40/110 GRC cladding

H40/120 GRC components

H40/130 Proprietary GRC components

Specification data - Glass-reinforced concrete cladding units Enhanced data

Component type

Insert requirements.

Standard

EN 15191: 2008, EN 1169: 1998, EN 1170, the GRCA Specification for the manufacture, curing and testing of glass fibre reinforced concrete (GRC) and PCI MNL 130-09 (modified to EN standards).

Production method

Spray process in accordance with EN 15191: 2008.

Guide mix design

Grade 21P.

Impact resistance

-

Soft body

Highly resistant.

Hard body

Highly resistant.

Form

-

Shape

Can be produced into a range of shapes, rectilinear or multi curvilinear are possible, insert requirements.

Panel type

Insert requirements.

Dimensions

-

Height

Insert requirements.

Width

Insert requirements.

Depth

Insert requirements.

Exposed faces

-

Surface texture

Insert requirements.

Colour

F01-00.

F02-00.

F03-00.

F05-00.

F09-00.

F10-00.

F11-00.

F12-00.

F14-00.

F15-00.

F16-00.

F18-00.

Bespoke.

As required, consult manufacturer for details.

Applied surface finish

Pre-finished.

Fixings

-

Primary

Insert requirements.

Secondary

Insert requirements.

Verification

-

Testing authority

UKAS Accredited Testing Laboratory 10206.

Evidence of compliance

Test results to 1170 with UKAS accredited modifications where appropriate.

Timing

Flexural testing - daily; density testing - weekly; movement testing - annually; ageing testing - annually.

Product Reference

Ultra-High Quality GRC (UHQGRC)

Flexural strength

After 7 days (LOP): 8 MPa; after 28 days (LOP): 8.5 MPa. After 7 days (MOR): 20 MPa; after 28 days (MOR): 21 MPa to EN 1170-5.

Dry density

1850 kg/mᶟ to EN 1170-6.

Water absorption

9% to EN 1170-6.

Shrinkage

0.6 mm/lm to EN 1170-7 (modified to GRC Synergies DIHM SOP 12).

Expansion

0.8 mm/lm to EN 1170-7 (modified to GRC Synergies DIHM SOP 12).

Combined

1.4 mm/lm to EN 1170-7 (modified to GRC Synergies DIHM SOP 12).

Ageing

Decline in MOR approximately 7% when tested in accordance with EN 1170-8 (modified to GRC Synergies DIHM SOP 13).

Anchor pull out test

Typically 3.8 kN to GRC Synergies LDM 1201.

Literature

UHQGRC

UHQGRC

Finishes

Finishes

Syntec GRC Company Brochure

Syntec GRC Company Brochure

Third party certifications

  • GRCA: Full Member Certificate: 1097/32
  • Certificate: FS616150 : ISO 9001:2015
  • NBS Enhanced