Type RG


Framed glass sliding stacking panel partition system.

  • Individually operated, top hung, aluminium framed glass panels, purpose made to suit any opening size.
  • Retractable top and bottom seals with telescopic jamb seals, all operated by removable crank handle.
  • Mechanically operated by worm screw drive.
  • No floor track.
  • Suitable for internal use or external use in combination with 10mm high weather bar.
  • Height maximum: 4 m.

General information

Uniclass 2015

Pr_30_59_24_80 Sliding door and partition setsPrimary


L20/545 Sliding stacking panel partitions

Specification data - Sliding door and partition sets

Product Reference

Type RG

Partition assembly

See drawing ___

See schedule ___


E - Fully electric

SE - Semi electric

M - Manual


Single stack

Bi - parting




E system

K system, offset stack

K system, behind reveal stack

K system, wall recess stack

K system, branch stack

K system, remote stacking

Z system, Za

Z system, Zb

Z system, cupboard stack

Track profile



For full Electric operation

For Manual or Semi - electric operation

Ceiling angle trim


Flush with underside of profile

Recessed 20 mm from underside of profile

Recessed ___ mm from underside of profile

Track finish

Aluminium, satin anodized

RAL 9010

Other RAL colours ___

Floor Track



With concealed drainage channel



Panel Type





Special ___


Toughened glass ___

Laminated glass ___

Double glazed unit, acoustic ___

Double glazed unit ___

Other ___

Frame finish

Aluminium, colour anodized, colour ___

Aluminium, RAL 9010

Aluminium, RAL colour ___

Aluminium, satin anodized


Aluminium, colour anodized, colour ___

Aluminium, RAL 9010

Aluminium, RAL colour ___

Aluminium, satin anodized

Pass door fittings


Latch with lever handle

Latch with lever handle and lock carcass

Other ___




Standard product features


  • Width (maximum): 1200 mm.
  • Thickness: 73 mm.
  • Curved layouts, corner panels, special function panels, glazing bars to special order.
  • Panels and wall jambs have interconnecting profiles.
  • Can be used in conjunction with Type 100 panels.

Acoustic performance:

  • Can be used to limit noise transmission between rooms, using optional dense cladding, optional internal insulation and higher sealing pressures.
  • Tested to achieve sound reduction ratings of up to Rw 39 dB, measured in accordance with BS EN ISO 140 -3.
  • Insulation typically related to panel weight.
  • Average achieved site insulation typically less than laboratory conditions.

Fire performance:

  • Non fire rated.

Product Options


  • M - Manual.
  • SE - Semi electric.
  • E - Fully electric.

Panel stacking layout:

  • K system. For 90° movement of panels away from main track, for remote panel stacking. Twin point cross roller suspension.
  • Z system. Straight runs only. Twin point guide roller suspension.

Ceiling track profile:

  • Selection of material and profile by manufacturer, dependent on panel weight and other parameters. Consult manufacturer to confirm size.
  • Ceiling angle trim allows masking of suspended ceiling edge.
  • 20 mm recessed angle trim required to avoid partition panels fouling ceiling when using E system single point suspension.
  • Recessed angle trim may be advisable in other applications, dependent on panel width and pattern of use.

Ceiling track finish:

  • Powder coated RAL 9010 as standard - other RAL colours to special order.

Floor track:

For use in external applications.

  • Standard. Width 32 mm, height 10 mm.
  • With concealed drainage channel below floor level.


  • DT - fixed, full height pass door panel. Cantilever hinges.
  • EE - corner, angle or T - junction panel.
  • NE - standard glazed panel.
  • SE - Relocatable, single leaf inset pass door panel. Cantilever hinges. With header and one jamb at hinge side.

Panel Glazing type:

  • Double glazed unit- Maximum unit thickness: 52 mm.

Panel frame finish:

  • Aluminium, colour anodized.
  • Aluminium, powder coated RAL 9010.
  • Aluminium, powder coated to other RAL colours.
  • Satin anodized aluminium (SAA).
  • Stainless steel cladding.


  • Standard. Width 53 mm.
  • Telescopic. Width 217–317 mm.

Similar products from Movawall Systems Ltd

Type GG

Type GG