NBS Source
List your products
Description

Used on secret fix Rainscreen systems for installing a 3 mm bracket at the back of 13 mm Fibre Concrete Facade Panels. Rivets have a 6 mm diameter body and a 3.3 mm mandrel.

Firstly, a pilot hole will be drilled into the back of the facade panel using a 6 mm stop drill bit. The pre-drilled bracket is then positioned over the hole, and the TUC-S rivet is pushed through the bracket into the hole and the mandrel is completely removed using a riveting tool.

Installation can be performed quickly, securely and easily by one person. Installation time can also be reduced by up to 50% compared with conventional blind attachments. This product can also be removed once installed if required.

This fastening solution cannot be overdriven during installation, due to its radial expansion. When the mandrel is removed, the partially cut thread becomes wedged into the back of the facade panel material, generating very high pull out values. Spontaneous slackening due to expansion or vibration is impossible.

Warranty:

Up to 40 years. Consult manufacturer to confirm.

General information
Material

Rivet body and the mandrel are manufactured from A4 1.4401 (316) grade austenitic stainless steel. Suitable for all corrosivity categories; C1–C5 as defined in BS EN 12944

Uniclass 2015
Semi-tubular rivets (Pr_20_29_71_77)Primary
Specification data - Semi-tubular rivets
Product Reference

TUC-S-W10-6x14-A4

Standard product features

Material:

Rivet body and the mandrel are manufactured from A4 1.4401 (316) grade austenitic stainless steel. Suitable for all corrosivity categories; C1–C5 as defined in BS EN 12944.

Product Options

Material:

Consult manufacturer for suitability with swimming pool applications.

Similar products from SFS Group Fastening Technology Ltd