NBS Source
I'm a manufacturer
Compare variants

Trisomet® Wall

Verified by manufacturer 15 days ago

Tata Steel Variant:
Third party certifications:
  • FM Approved

    FM Approved

    Certificate type

  • BES 6001

    BES 6001

    Certificate type

  • ISO 14001 Environmental Management Systems

    Certificate type

  • ISO 9001 Quality Management

    Certificate type

  • BRE Certificate

    BRE Certificate

    Certificate type

  • EPD

    EPD

    Certificate type

Insulated trapezoidal steel wall panel system.

Jump to:
+44 (0) 1244 892199 Website

Application

Suitable for horizontal and vertical wall cladding applications.

Description

Trisomet® is an insulated panel manufactured as a single component suitable for horizontal or vertical wall cladding applications. As a one-fix component its consistency enables speed of installation and with a wide spaced trapezoidal steel external skin provides optimum performance for water drainage, strength and walkability. Single, double and multi span configurations are available.


Features and benefits:

  • One fix construction in panel lengths from 300 mm to 20 m to optimize the speed of installation and minimize waste for more sustainable construction.
  • Core depths from 40 to 135 mm to optimise the design solution.
  • The 135 mm core meets a U-value of 0.15 W/m²K.
  • Third party validation of high standards of quality, thermal performance, fire safety, air-tightness, water penetration and environmental credentials.
  • Approved to FM Class 4880, 4881 and 4471 to unlimited wall height.
  • LPCB (Loss Prevention Certification Board) approval to LPS 1181-1 to help reduce insurance premiums and assure reaction to fire performance.
  • Fire resistance performance of up to 30 minutes insulation and four hours integrity achievable with standard fixing and sealing methods (external side-lap stitched at maximum 300 mm centres).
  • Available with Platinum® Plus - a system guarantee for up to 30 years, that covers the durability, structural and thermal performance of all system components. The guarantee is derived from a tailored specification to suit your building function and is fully transferable on change of ownership of the building.
  • Colorcoat HPS200 Ultra® or Colorcoat Prisma® pre-finished steel used as standard, offering long-term UV and corrosion performance with the Confidex® Guarantee and providing peace of mind for up to 40 years.
  • Product specification and performance in accordance with BS EN 14509, European Product Standard for CE Marking.
  • Full traceability of all component materials and certified ‘very good’ to BRE’s responsible sourcing standard BES 6001 which helps increase credits under the Responsible Sourcing of Materials section of Building Research Establishment Environmental Assessment Method (BREEAM).
  • The PIR core has zero ozone depletion potential (ODP) and a very low global warming potential (GWP) of less than 5 to increase BREEAM credits.
  • All steel elements are 100% recyclable, without any loss of quality.


Fire performance:

LPS 1181 Grade EXT-B

Trisomet® carries Grade EXT-B and EXT-A approval by the LPCB, Certificate 460a/29. Also fire resistance performance of up to 4 hours integrity and 30 mins insulation dependant on panel thickness. These are attained using standard fixing and sealing methods (external side-lap stitched at maximum 300mm centres).

internal surface of the panel complies with a Class B s2 d0 rating in accordance with EN 13501-1.


Water penetration:

Laboratory testing shows evidence that the Trisomet® system is water-tight up to a pressure of 1200 Pa, which surpasses the relevant standards.

Pa, when tested to BS EN 12865‘Hygrothermal performance of building components and building elements’


Air-tightness:

In accordance with Building Regulations Approved Document L2 (E&W) and Scotland (Technical Handbook Section 6 Energy) tests to EN BS 12114 shows the sealed panel of air leakage as low as 0.43 m³/h/m² at an applied pressure of 50 Pa.

A practical expectation for a finished building, with effective sealing at all junctions, would be 3-5 m³/h/m². However, enhanced detailing practises on large shed buildings can realise air leakage performance figures of less than 3 m³/h/m².


Find out more: https://www.tatasteeleurope.com/construction/products/roof/insulated-panels/trisomet

General information

Color

Other

Manufacturer guidance

Wide range available.

Material

Steel

Guidance for specification option:

Pre-coated steel skins/ PIR core.

Length

Bespoke

Width

1000 mm

Height

Bespoke

Warranty description

25 year

Third party certifications

FM Approved

FM Approved

Factory Mutual Approval (3055069)

BES 6001

BES 6001

BES 6001

ISO 14001 Environmental Management Systems

ISO 14001 Environmental Management Systems

ISO 14001 / 45001

ISO 9001 Quality Management

ISO 9001 Quality Management

ISO 9001

BRE Certificate

BRE Certificate

Loss Prevention Certification Board - Certificate 460a

EPD

EPD

EPD Trisomet 80mm Insulating Roof & Wall Panel

EPD

EPD

EPD Trisomet 120mm Insulating Roof & Wall Panel

EPD

EPD

EPD Trisomet 100mm Insulating Roof & Wall Panel

Literature

Trisomet design and installation guide

Trisomet design and installation guide

Trisomet® brochure

Trisomet® brochure

TATA Building Systems UK - All products brochure

TATA Building Systems UK - All products brochure

Colorcoat HPS200 Ultra® colour card

Colorcoat HPS200 Ultra® colour card

Colorcoat® LG colour card

Colorcoat® LG colour card

Colorcoat Prisma® colour card

Colorcoat Prisma® colour card

Trisomet® CE DOP

Trisomet® CE DOP

Optemis Carbon Lite

Optemis Carbon Lite

Case studies

Automotive Steel Store

Automotive Steel Store

Jaguar Land Rover, Body in White Building, Castle Bromwich

Jaguar Land Rover, Body in White Building, Castle Bromwich

Sellafield - Pond Hall Building

Sellafield - Pond Hall Building

WICKES DIY STORE, FARNBOROUGH

WICKES DIY STORE, FARNBOROUGH

PUCKLECHURCH INDUSTRIAL BUILDING

PUCKLECHURCH INDUSTRIAL BUILDING