NBS Source
Trisobuild VW/ FWV
Compare variants

Trisobuild VW/ FWV

Trisobuild® FW30V

Tata Steel Variant:
Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

Site assembled steel vertical walling system.

Jump to:
+44 (0) 1244 892199 www.tatasteeleurope.com

Application

Suitable for vertical design walling applications.

Description

Site assembled walling system with internal and external profiles.

The Trisobuild® systems can be tailored to meet project requirements including fire resistance and acoustic performance. The system comprises of a Colorcoat® pre-finished steel trapezoidal liner profile, an Instaloc® Plus spacer system, an insulation layer and a Colorcoat® pre-finished steel external weathering profile.

The Trisobuild® VW System is a vertically run wall system which can provide an efficient external cladding system. The system provides the designer with an infinite number of combinations to create a unique aesthetic.

The capability of the systems can also allow the designer to specify the correct performance for the building and elevation. With tested components, the system provides a range of thermal, acoustic and fire resistance performance levels. The wall system can achieve up to four hours fire integrity and one hour fire insulation.


Features and benefits:

  • Certified 'very good' to Building Research Establishment (BRE)'s responsible sourcing standard BES 6001.
  • Available with Platinum® Plus - a system guarantee for up to 30 years, that covers the durability, structural and thermal performance of all system components. The guarantee is derived from a tailored specification to suit your building function and is fully transferable on change of ownership of the building.
  • Loss Prevention Certification Board (LPCB) LPS 1181-1 approved 460a 14, 15, 19, 23 and 31.
  • The insulation within the system has both zero ozone depletion potential (ODP) and low global warming potential (GWP). Both these factors support the achievement of a high Building Research Establishment Environmental Assessment Method (BREEAM) rating.
  • Trisobuild® wall systems have been third party assessed using BS 476–22 ‘Fire resistance of non-load bearing elements’.
  • All steel elements are recyclable, without any loss of quality. The insulation can be separated easily and if kept ‘clean’ can be recycled. A product specific environmental product declaration (EPD) is available for all Trisobuild® systems.


Trisobuild® FW (fire wall) range system build-up:

  • The resistance to fire insulation and integrity in minutes are: FW30V: 30/240, FW60V: 60/240.
  • For the FW30V system, a minimum 160 mm Knauf FactoryClad insulation quilt should be used. For the FW60V system, a minimum of 200 mm Rockwool quilt of nominal density 24 kg/m³ should be used.
  • External profile, side lap stitching is optional but recommended at a maximum 500 mm centres for aesthetic reasons only.
  • Minimum 140 mm high Instaloc® Plus spacer system for the FW30H system should be used and 180 mm for FW60H.
  • Internal liner profile.


Supporting structures:

  • When sheeting rails heat up during a fire they cease to function as structural members. Therefore, to prevent the wall from moving downwards under its own self-weight either a support at the head or base of the wall is required.
  • All Tata Steel firewalls can be designed to be supported from eaves, beams/ stanchions or rafters and posts if situated on a gable end. However, these elements must be protected using conventional fire protection materials to give the same period of fire resistance as the firewall.


Reaction and resistance to fire:

  • All Trisobuild® VW systems have an internal reaction to fire classification of A1 and an external reaction to fire of A1 when using Colorcoat Prisma®, and when using Colorcoat HPS200 Ultra® is deemed to satisfy B-s3-d2 in accordance with ADB2.
  • All fire wall system performances have a maximum span limit between supports of 1.525 m.


Thermal performance:

All quoted system U-values and construction ‘psi’ and f values have been computer modelled in accordance with EN ISO 10211 as stated in the Metal Cladding and Roofing Manufacturers Association (MCRMA) Technical Note 14 by trained and experienced technical engineers.

U-Values are based on secondary steelwork support at 1.8 m centres, 1.2 m bracket spacing and insulation with a 0.040 W/mK thermal conductivity.


U-values:

U-Values are based on an LP1000 liner, secondary steelwork support and brackets at 1.5 m centres, 1.5 m vertical bar spacing and insulation with a 0.040 W/mK thermal conductivity.

General information

Color

Wide range available.

-

Material

Steel

Size

To suit project requirements.

-

Uniclass

Ss_25_20_14_54 Metal insulating sandwich panel cladding systemsPrimary

CAWS

H31/10 Metal

H31/120 Metal

Specification data - Metal insulating sandwich panel cladding systems Enhanced data

Cladding panels

-

Panel type

Carbon steel insulating sandwich panels

Continuity thermal insulation

A minimum 160 mm Knauf FactoryClad insulation quilt.

Material

Colorcoat HPS200 Ultra® pre-finished steel.

Colorcoat Prisma® pre-finished steel.

Grade

S220 Steel.

Profile

Various.

Insert requirements.

Thickness

0.5 mm.

0.7 mm.

Material

Colorcoat® High Reflect steel.

Colorcoat® PE 15 steel.

Grade

S220 Steel.

Profile

LP1000.

Thickness

0.4 mm.

Length

Maximum span limit between supports of 1.525 m.

-

Thickness

Consult manufacturer and insert requirements.

-

Material

Pre-coated steel.

Colour

Insert requirements.

-

Material

Pre-coated steel.

Colour

Insert requirements.

-

Span

As drawing.

Insert details.

Height

140 mm.

Insulation depth: 140 mm. U-value: 0.30 W/m²K.

160 mm.

Insulation depth: 160 mm. U-value: 0.26 W/m²K.

180 mm.

Insulation depth: 180 mm. U-value: 0.23 W/m²K.

200 mm.

Insulation depth: 200 mm. U-value: 0.21 W/m²K.

220 mm.

Insulation depth: 220 mm. U-value: 0.19 W/m²K.

Show more

Reaction to fire

A1.

Panel external face.

Panel internal face

Integrity: 240 minutes. Insulation: 30 minutes.

Environmental information

Recyclability

All steel elements are recyclable, insulation is recyclable if kept clean.

100%

Literature

Colorcoat® LG

Colorcoat® LG

Colorcoat HPS200 Ultra Colourcard

Colorcoat HPS200 Ultra Colourcard

Colorcoat HPS200 Ultra Technical Brochure

Colorcoat HPS200 Ultra Technical Brochure

Photovoltaic installation guidelines for industrial and commercial buildings

Photovoltaic installation guidelines for industrial and commercial buildings

Acoustic performance of pre-finished steel cladding systems

Acoustic performance of pre-finished steel cladding systems

Structural performance of built-up roof and wall cladding systems

Structural performance of built-up roof and wall cladding systems

Ensuring consistent appearance of pre-finished steel wall cladding

Ensuring consistent appearance of pre-finished steel wall cladding

Refurbishment solutions for non-domestic solutions

Refurbishment solutions for non-domestic solutions

The effect of gauge on pre-finished steel roof and wall cladding performance

The effect of gauge on pre-finished steel roof and wall cladding performance

Creating an air-tight building envelope

Creating an air-tight building envelope

Colorcoat Prisma® Colourcard

Colorcoat Prisma® Colourcard

Third party certifications

  • Loss Prevention Certification Board (LPCB): Certificate: LPS1181 Part 1 : 460a, 14, 15, 19, 23, 31

Similar products from Tata Steel

Formawall®

Formawall®

Trimapanel®

Trimapanel®

Trimapanel® Flat

Trimapanel® Flat

Trimapanel® FTF

Trimapanel® FTF

Trisobuild HW/ FWH

Trisobuild HW/ FWH

Trisomet® Wall

Trisomet® Wall