Compare

TRADELINE Twin Frame Braced C Stud Partition Systems Utilising Siniat Board

Name: TRADELINE Twin Frame Braced C Stud Partition Systems Utilising Siniat Board
Brand: Metsec (voestalpine Metsec)
SKU: s9NuVY3AZ2fTgHErqCCubM

Verified by manufacturer 4 months ago

TWC50-S-60(2x50)(210)

Metsec (voestalpine Metsec)

Third party certifications:

BES 6001
Certificate type
BSI Kitemark
Certificate type
EPD
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
ISO 9001 Quality Management
Certificate type
UK Conformity Assessed (UKCA)
Certificate type

Twin Frame Braced C Stud Plasterboard partition system.

Jump to:

+44 (0) 121 601 6000 Website

Application

Wall partitions.

Description

TRADELINE Braced Twin Frame C Stud systems are lightweight, non-load-bearing, friction fit

systems.

They can be used within all sectors but primarily within residential to achieve the

acoustic requirements of Approved Document E.

Due to greater separation between the TRADELINE frameworks, high levels of sound insulation can

be achieved up to Rw 65dB. Whilst also providing up to 120 minutes of fire resistance.

Features and benefits:

Quick and easy to install lightweight construction.
Variable cavity thickness.
Overall construction of 200 to 400 mm on tested configurations.
Rw figures from 58 to 65 Rw dB.
Tradeline thermal braced twin frame 'C' stud achieves up to Rw 65 dB and a theoretical U-value of 0.0 W/m²K.

Structural performance:

Strength grade to BS 5234-2:1992 Annexes A-F.

Fire performance:

Fire resistance to BS 476:1987:Part 22.

Acoustic performance:

Calculated weighted sound reduction index (Rw) to BS EN ISO 10140-2: 2010.

Installing framing for partitions:

Partition height (maximum) calculated based on a limiting deflection of L/240 at 200 Pascals.

General information

Length	Bespoke
Width	200 mm 210 mm 250 mm
Height	Bespoke

Uniclass	Ss_25_10_30_35 Gypsum board partition systemsPrimary
CAWS	K10/125 Metal stud partition system K10/30 Metal stud

Product range	Drylining / Twin Frame Partitions - Braced C Stud Drylining / TRADELINE Drywall Systems

Specification data - Gypsum board partition systems

Framing	Twin Tradeline 50 mm 'C' Stud, braced at 1200 mm vertical centres.
Insulation	Acoustic partition roll, 50+50 mm.
Linings	-
Inner layers	Siniat GTEC dB Board, 15 mm.
Face layer	Siniat GTEC dB Board, 15 mm.
Fasteners	Tradeline Drywall Screws.
Joint treatment	Tradeline Joint Tape. Tradeline Paper Joint Tape. Tradeline Light Weight All Purpose Joint Compound. Tradeline Metal Corner Tape. Tradeline Flexible Metal Corner Tape. Tradeline Scrim Tape. Tradeline Drywall Self-Adhesive Joint Tape.
System accessories	Tradeline Acoustic Intumescent Sealant. Tradeline PB24 Partition Brace. Tradeline FS24 Flat Bracing Strip. Tradeline ASP19B Plywood Service Support Plates.

Fire resistance	To BS 476:1987:Part 22, 90/ 90 minutes (Integrity/ Insulation).
Partition height	- Manufacturer guidance Insert requirement, maximum 6800 mm (at 600 mm centres). Calculated based on a limiting deflection of L/240 at 200 Pascals.
Nominal thickness	210 mm. Guidance for specification option: Optimum system thickness. Note that if a greater partition thickness is required, this may improve the sound reduction index (Rw) - consult manufacturer for details.
Calculated weighted sound reduction index (Rw)	60 (-9) Rw dB. Guidance for specification option: Based on the nominal system thickness.
Centres	600 mm.
StrengthGrade	Severe duty.
Head/ Floor channel	Tradeline Standard Track. Guidance for specification option: Used for partition heights under 4 m. Available in 50, 52, 62 or 72 mm wide. 25 mm flange. Tradeline 32 mm Leg Track. Guidance for specification option: Used for partition heights under 4 m. Available in 52, 62, 72, 94 or 148 mm wide. 32 mm flange. Tradeline Deep Track. Guidance for specification option: Used for partition heights between 4 m and 8 m. Can be used as a head track where a deflection head of up to 30 mm is needed. Available in 52, 62, 72, 94 or 148 mm wide. 50 mm flange. Tradeline Extra Deep Track. Guidance for specification option: Used for partition heights between 8 m and 10.2 m. Can be used as a head track where a deflection head of up to 45 mm is needed. Available in 72, 94 or 148 mm wide. 70 mm flange.
Standards	To BS 5234-2:1992 Annexes A-F, BS 476:1987:Part 22, BS EN ISO 10140-2: 2010.