Verified by manufacturer 2 months ago
Flexible acrylic-rubber injection resin.
A high performance, five-part injection resin that reacts to create an acrylic-rubber compound with exceptional durability, flexibility and adhesion. These qualities make TRADECC PC 509 Rubber Acryl perfect for sealing leaks in structures that are subject to settlement or movement, such as movement joints.
The cured resin also swells in contact with water, retaining that moisture so as not to dry or shrink even under seasonal temperature and water level fluctuations.
By adjusting the volume of Initiator (Part E) that is used, the reaction speed of TRADECC PC 509 Rubber Acryl can also be controlled from 18 seconds up to 18 minutes. Coupled with its flexibility, adhesion and low viscosity, the resin is guaranteed to penetrate deep into fine cracks in the substrate, even when dry.
Features and benefits:
Newton ReSeal System:
The Newton ReSeal System consists of a range of Newton’s advanced concrete repair mortars and injection resins to seal structural and non-structural cracks and defects, whether they are dry or leaking large volumes of water.
The products in the Newton ReSeal System can be used to repair a number of defects, including spalled and broken concrete to walls and pillars, road repairs, and cracks and honeycombing to concrete basement walls, soffits and floors.
Whitish pink - mixed.
When specified, installed and protected in accordance with the Data Sheet, fully and permanently isolated from UV light and physical damage or wearing, and only to those substrates confirmed within, TRADECC PC 509 Rubber Acryl has a service life that can be equal to the design life of the structure
C42/340 Crack/ void sealing grouts
Five-part injection resin that reacts to create an acrylic-rubber compound.
Viscosity at 20°C
Yes - by initiator.
18 seconds to 18 minutes.
Rate of expansion
24.91 kg container.
(Part A - Resin), 0.09 kg bottle (Part B - Additive), 2.5 kg bottle (Part C - Catalyst), 23.7 kg container (Part D - Strengthener), 0.625 kg container (Part E - Initiator).
Country of material origin
Country of product manufacture