NBS Source
List your products
Description

A range of associated sections to complement the range of purlins, cladding rails and steel framing projects.

Alternative eaves section:

  • A range of alternative eaves sections are available to offer greater construction flexibility. These sections may be connected directly to column flanges without the need for cleats, or may be attached through flange plates or seating brackets.
  • Parallel (TPP) and non-parallel (TPN) flange sections are available.
  • Manufactured in a range of thicknesses from 1.2 to 4 mm S450GD+Z275 zinc coated steel.

Door post section:

  • Used in framing for personnel access doors. The section is recessed to avoid bolt heads encroaching into the clear opening of the doorway.
  • Manufactured in a range of thicknesses from 1.2 to 4 mm S450GD+Z275 zinc coated steel.

Eaves pressed section:

  • Similar to Eaves beam range of sections but with the option to specify the top flange included to either a positive or negative slope.
  • Manufacturing lengths (minimum x maximum): 400 x 13000 mm.
  • Top flange slope (minimum x maximum): -25° x +30°.
  • Manufactured in a range of thicknesses from 1.2 to 2.4 mm S45390GD+Z275 zinc coated steel.

Top hat section:

  • A range of top hat sections used for horizontal cladding solutions and over cladding solutions.
  • Standard top hat sections are TH80 (1.7mm), TH100 (1.7mm).
  • Standard top hat panel joint option are THPJ80 (1.8mm), THPJ100 (1.8mm).
  • Bespoke sizes available on request.
  • Manufactured in a range of thicknesses from 1.2 to 2.4 mm S45390GD+Z275 zinc coated steel.

General information
Size

As drawing ___

Insert requirements.

Material

Hot dipped zinc coated steel

Uniclass 2015
Cold-formed galvanized steel sections (Pr_20_76_51_21)Primary
Specification data - Cold-formed galvanized steel sections
Product Reference

Alternative eaves section (TPP)

Alternative eaves section (TPN)

Door post section

Eaves pressed section, ___°

Insert requirements.

Top hat section (TH)

Top hat section (THPJ)

Size

As drawing ___

Insert requirements.

Digital objects
PlatformCompatibleVersionCertified to
IFC
- 5 2.1
Revit
- 5 2.1
Download now from NBS National BIM Library
Similar products from Ayrshire Metals Ltd