NBS Source
List your products
Application

  • Designed for use in high performance built up roofing systems and meets requirements of both new build and remedial roofing applications.
  • Can be applied as an underlay to all suitable types of substrates and is particularly well suited to roofs with high condensation risk.
  • In addition, it may be used as part of an overlay system to existing asphalt waterproofing. The product is not recommended for use as single layer waterproofing.

Description

A high performance, polyester-reinforced waterproofing material which is saturated and coated with high quality styrene-butadiene-styrene (SBS) modified bitumen. The upper side is finished with fine-grained sand, whilst the underside consists of specially engineered low melt bitumen stripes with sand in between, covered by thermofusible film to prevent the roll from sticking together. The stripe technology is designed to achieve partial bonding to the substrate and to allow any trapped vapour or moisture to dissipate in all directions, thus preventing blistering build up.

Features and benefits:

  • Good low temperature flexibility at -20°C.
  • Compatible with all types of bitumen membranes.
  • Suitable for roofs with high condensation risk.
  • High puncture resistance.
  • High resistance to foot marking.
  • Manufactured to EN 13707: 2004 + A2: 2009.
  • CE marked.

Applications:

  • Designed for use in high performance built up roofing systems and meets requirements of both new build and remedial roofing applications.
  • Can be applied as an underlay to all suitable types of substrates and is particularly well suited to roofs with high condensation risk.
  • In addition, it may be used as part of an overlay system to existing asphalt waterproofing. The product is not recommended for use as single layer waterproofing.

General information
Specification data
Product Reference

Technoelast K-TMS 170/3400 Venting Layer

Standard product features

Size (l x w):

10 x 1 m.

Weight:

3.4 kg/m² (±0.17).

Technical characteristics:

  • Reinforcement type and weight: Polyester, 170 g/m².
  • Water tightness (to DIN EN 1928): 300 kPa.
  • Tensile properties maximum tensile force (to EN 12311-1): 700/ 500 N/50mm (±200 /140).
  • Tensile properties elongation (to EN 12311-1): 50/ 50% (±15).
  • Resistance to tearing (nail) (to EN 12310-1): 180/ 180 N (±30).
  • Flow resistance at elevated temperatures (to EN 1110): ≥90°C.
  • Flexibility at low temperatures (to DIN to EN 1109): ≤-20°C.
  • Water vapour transmission properties (to EN 1931): µ=20 000.
  • Reaction to fire (to EN 13501-5/ to ENV 1187: 2002, test 2): Broof (t2).
  • Chemical resistance: Water-resistant and is resistant to watery solutions of salt, diluted non-oxidising acids and bases. Aliphatic and aromatic hydrocarbons, as well as chlorine hydrocarbons, oils and greases may loosen the product and should therefore be avoided.

Similar products from TechnoNICOL