Steel shelving system available in multiple lengths, depths and heights. Can be tailored around building features. Suitable for single-sided installation or applied as double-sided shelving placed in the room.
Manufactured from 0.75 mm steel and powder-coated before being roll formed, all surfaces of the shelves will be 100% epoxy powder-coated for longevity.
- Upright panels:
Box section uprights manufactured from 0.75 mm steel with a face dimension of 30 mm and standard load capacity of 800 kg. Upright panels can be fully clad on each side (i.e. double-skinned) to present a completely flat face. All uprights are fitted with base-plates and levelled with interlocking shims. Double-sided racks are connected with structural fixings.
- End panels:
Decorative End panels can be fitted to each rack.
Index / Way finding:
- Various signage options are available for indexing and way finding.
- Shelf supports:
Shelves will be supported on four clips, concealed within the flange of the shelf. Neither tools nor specialist skill will be required to adjust shelf heights.
- Back cladding:
The backs/spines of all bays can be open/braced or fully clad to prevent accidental contents migration.
Epoxy-polyester powder coated to DIN 55690 SP-EP
Dry and oil-free steel, certified to quality standard BS EN 1013
|Uniclass 2015||Shelf units (Pr_40_30_78_77)|
Insert requirement, 155 kg (maximum) without use of reinforcement bar.
Elba Pendel frame
l’Oblique /TUB frame
Roller front doors
Shelf perforated 2 and 3 rows
Steel partition panel
ZT Pendel frame
|Standard product features|
Dry and oil free steel, certified to quality standard EN 1013.
Epoxy polyester powder coated to DIN 55690 SP-EP with an average paint layer thickness of 35 µm. Where folded or boxed sections are formed, the steel will be powder coated prior to being formed, ensuring every surface is 100% coated. Pre-galvanized steel is not used.
RAL 9002 (Grey white).