SUPALUX® - Fire Protection to Partitions and External Walls - Internal Partition

SUPALUX® - Fire Protection to Partitions and External Walls - Internal Partition

Promat UK Third party certifications:
  • Certifire Certificate

    Certifire Certificate

    Certificate type

Fire protection to internal partitions and external walls.

Jump to:
+44 (0)800 145 6033 www.promat.com
Application

Provide fire protection to partitions and external walls.

Description

Promat SUPALUX is a non-combustible calcium silicate board reinforced with selected fibres and fillers which can be used for fire protection of internal partitions and external walls.

Fire resisting walls used for partitioning buildings and enclosing compartments will be required to provide a barrier to the passage of fire from one side or the other and must therefore be also to satisfy each of the relevant criteria (integrity, insulation and if the wall is loadbearing - the loadbearing capacity).

Application:

Provide fire protection to partitions and external walls.

General information

Finish

Painted, paint finishes should not compromise the surface spread of flame

Finishes should be applied in accordance with Promat TDS 056. Untreated

Untreated

Size

Features

Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%. 30 - 240 minutes fire resistance, 30 plus years proven performance, high temperature environments (up to 80°C). Slim constructions, multiple applications, early installation for faster build

Material

A non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde.

Shape

Square profile

WarrantyDescription

Etex Building Performance Limited warrants that our passive fire protection products and component parts, when installed in the building originally designed, built and unaltered in accordance with the conditions and procedures set out in Promat Passive Fire Protection Handbook, this specification document and associated CAD drawings; and any specific technical recommendations made in relation to the above project, shall be durable and free from defects due to faulty manufacturing or factory workmanship

The system must be installed by a 3rd party accredited fire protection contractor, and where included in the specification, solely with proprietary products and components as supplied by Etex Building Performance Limited

The scope of this warranty will be dependent on the application and the environment in which the products are being installed

Uniclass 2015

Pr_25_71_52_24 Fibre-reinforced calcium silicate fire protection boardsPrimary

CAWS

K11/885 Fire protection board

P12/310 Boards

Specification data - Fibre-reinforced calcium silicate fire protection boards

Product Reference

SUPALUX®

Fire Protection to Partitions and External Walls - Conversion Of External Wall To Internal Wall (Concealed System Grid System)

SUPALUX®

Fire Protection to Partitions and External Walls - Internal Partition (Timber Stud Partition)

SUPALUX®

Fire Protection to Partitions and External Walls - Internal Partition (Steel Stud Partition)

SUPALUX®

Fire Protection to Partitions and External Walls - Internal Partition (Solid Partition)

SUPALUX®

Fire Protection to Partitions and External Walls - Internal Partition (Shaftwall System)

SUPALUX®

External Walls Further Than 1 m From The Relevant Boundary (Concealed System Grid System)

Standard

BS 476-22

FireRating

Non-combustible with a reaction to fire Classification of A1 according to BS EN:13501-1

Thickness

6 mm

9 mm

12 mm

15 mm

20 mm

25 mm

Edges

Square

Certification

Certifire Certificate CF 420A

Frame

Horizontal sheeting rail, top hat sections, galvanised angle (various dimensions dependent on partition selected)

Steel stud, ceiling and floor channel (various dimensions dependent on partition type selected) Timber studs, timber noggins

Insulation thickness (minimum)

Stone wool insulation thickness and density varies (dependent on partition type selected)

Fillet strips

Not required

Promat SUPALUX® fillet (various dimensions dependent on partition type selected)

Lining

-

Inner layer

Promat SUPALUX® (various thicknesses dependent on partition type selected)

Face layer

Promat SUPALUX® (various thicknesses dependent on ceiling type selected)

Fasteners

M4 self tapping screws and M6 anchor bolts

M4 Wood screws and M6 steel anchors

System accessories

PROMASEAL® Intumescent Sealant

Fire protection

For Promat SUPALUX® conversion of external wall to internal, fire protection provided from EI30 to EI120 minutes.

For Promat SUPALUX® External Walls Further than 1 m from the relevant Boundary, fire protection provided from E120 to E240 minutes and EI15 minutes

For Promat SUPALUX® shaftwall partitions, fire protection provided from EI60 to EI120 minutes (dependent on side of shaftwall the temperature is measured)

For Promat SUPALUX® solid partitions, fire protection provided from EI30 to EI240 minutes

For Promat SUPALUX® steel stud partitions, fire protection provided from EI30 to EI240 minutes

For Promat SUPALUX® timber stud partitions, fire protection provided from EI30 to EI120 minutes

Substrate

Solid or structural wall/floor that provides at least the same fire performance as required from the Promat SUPALUX® system

Finish

Painted, paint finishes should not compromise the surface spread of flame

Finishes should be applied in accordance with Promat TDS 056. Untreated

Untreated

Moisture

Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%

Size

Insert requirements.

Standard product features

Colour:

Off-white.

Features:

Boards can be installed before the building is watertight and are suitable for areas where the humidity is up to 85%. 30 - 240 minutes fire resistance, 30 plus years proven performance, high temperature environments (up to 80°C). Slim constructions, multiple applications, early installation for faster build.

Finish:

Promat SUPALUX® has a smooth sanded surface on one face with a lightly textured reverse face.

Material:

A non-combustible calcium silicate board reinforced with selected fibres and fillers. It is formulated without inorganic fibres and does not contain formaldehyde. .

Shape:

Square profile.

Size:

2440 mm x 1220 mm - 6 mm, 9 mm, 12 mm, 15 mm (thickness), 2500 mm x 1250 mm - 20 mm, 25 mm (thickness).

Warranty description:

Etex Building Performance Limited warrants that our passive fire protection products and component parts, when installed in the building originally designed, built and unaltered in accordance with the conditions and procedures set out in Promat Passive Fire Protection Handbook, this specification document and associated CAD drawings; and any specific technical recommendations made in relation to the above project, shall be durable and free from defects due to faulty manufacturing or factory workmanship.

The system must be installed by a 3rd party accredited fire protection contractor, and where included in the specification, solely with proprietary products and components as supplied by Etex Building Performance Limited.

The scope of this warranty will be dependent on the application and the environment in which the products are being installed.

Third party certifications
  • Certificate CF 420A
Similar products from Promat UK