Compare

Styccobond F73 Plus - Flooring Adhesive

Name: Styccobond F73 Plus - Flooring Adhesive
Brand: Ball, F and Co Ltd
SKU: rFqX4qQF7uojn6EAsYWbBo

Verified by manufacturer 4 months ago

Ball, F and Co Ltd

Third party certifications:

ISO 14001 Environmental Management Systems
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type

Heavy duty one part flooring adhesive.

Jump to:

+44 (0)1538 361633 Website

Application

Suitable for securing needle punched/ fibre bonded carpets, artificial grass, PVC, latex, polyurethane and rubber backed carpets, vinyl and rubber floorings, in both sheet and tile format.

It can also be applied to Stopgap smoothing underlayment's, sound, smooth subfloors of concrete, granolithic, sand/ cement screeds and plywood.

Description

A single pack, fibre-reinforced moisture curing heavy duty flooring adhesive.

It is water-resistant and suitable for outdoor use, however, it is not intended to be used as or as a substitute for a surface damp proof membrane.

Features and benefits:

It is resistant to oil and grease and is suitable for use over normal underfloor heating systems.
Viscous liquid.

Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

For installation onto non-absorbent subfloors, contact our Technical Service Department.

General information

Color	White
Finish	Trowelled
Material	Other
Shape	Formless
Length	Bespoke
Width	Bespoke
Height	Bespoke
Warranty description	Lifetime

Uniclass	Pr_20_31_02_03 Acrylic and methacrylate adhesivesPrimary
CAWS	M50/10 Resilient floor tiling M50/110 Resilient floor tiling M50/150 Sheeting M50/170 Carpeting M50/20 Sheeting M50/25 Carpeting

Specification data - Acrylic and methacrylate adhesives

Form	One-component.
Open time (minimum)	20 minutes. Guidance for specification option: 20–30 minutes depending on temperature, humidity and absorbency of the subfloor.
Colour	White.
Execution	- Manufacturer guidance Trowelled - Consult manufacturer for details and insert requirements.

Reinforcement	Fibre reinforced.
Coverage	1.8–3.3 kg/m² (dependent on application).
Cure time	Initial set from 90 minutes; full cure 24 hours.

Sustainability data

Contains Red List materials	No
Country of material origin	Europe
Country of product manufacture	United Kingdom
Embodied carbon A1-A3 (production stage) as defined in BS EN 15804	0
Recyclability	Packaging partly
Recycled content As defined in clause 7.8 of BS EN ISO 14021	0 %