Styccobond F66 Contact Adhesive

Ball, F and Co Ltd Third party certifications:
  • QA Certificate

    QA Certificate

    Certificate type

Solvent free contact adhesive for securing PVC/rubber edgings, coving, nosing and some floor coverings.

Jump to:
+44 (0)1538 361633

STYCCOBOND F66 is a solvent free contact adhesive providing a safer alternative to conventional solvent based products. The adhesive should be applied by notched spreader and/or sponge applicator. The adhesive is suitable for use over normal underfloor heating. The formation of an instant bond makes it particularly suitable for use on vertical surfaces.

STYCCOBOND F66 can be used for securing PVC and rubber edgings, covings and nosings, floor and wallcoverings with backings of PVC, rubber, cork and most textiles. Refer to the F. Ball Recommended Adhesives Guide for details of specific floorcoverings and wallcoverings.

Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate smoothing underlayment.

STYCCOBOND F66 can be used on substrates of Plaster, Cement Render, Wood, Stone, Metal and UPVC.

For details on other surfaces, contact our Technical Service Department.

On suitably prepared, very absorbent surfaces use neat STOPGAP P121 or diluted STOPGAP P131 in accordance with instructions on the appropriate Technical Data Sheet.

General information
Specification data - Solvent-based synthetic rubber resin adhesives

Product Reference

Styccobond F66 Contact Adhesive

Product Options

Technical properties:

  • Colour - White.
  • Consistency - Creamy
  • Coverage Rates - 5m2 per litre per coat or 125 linear metres of 100mm wide coving per 5 litres with a notched spreader 9m2 per litre per coat with an applicator sponge

Drying Time - 30 minutes

Third party certifications
  • Quality Assurance - certficate : STYCCOBOND F66 has been tested to the standards of the International Maritime Organisation and approved for use in marine floor installations.USCG approval No. 164/112/1121/WCL MED0404.
Similar products from Ball, F and Co Ltd