Description

STYCCOBOND F52 is a polymer reinforced gum spirit adhesive, designed to provide a rigid setting bond for the installation of carpet and linoleum. It is protected against bio-degradation and is suitable for use over normal underfloor heating installations.

STYCCOBOND F52 can be used for securing a wide range of fibre bonded/needle punched carpets, unitary and hessian backed carpets and linoleum.

See the F. Ball Recommended Adhesives Guide for details of specific floorcoverings.

STYCCOBOND F52 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard.

STOPGAP waterproof surface membranes, sound flooring grade asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

For details on other subfloors, contact our Technical Service Department.

Highly absorbent subfloors such as sand/cement screeds and plywood etc. may cause rapid drying of the adhesive, thus reducing the open time. Use STOPGAP P131 diluted4 parts of water and stir until thoroughly dispersed. This should be allowed to dry thoroughly before proceeding with the installation.

Dry and suitably prepared calcium sulphate screeds e.g. anhydrite must be primed with neat STOPGAP P121.

General information
Specification data - Polyurethane (PUR) adhesives

Product Reference

Styccobond F52

Product Options

Technical properties:

  • Colour - Grey/Brown.
  • Consistency - Paste
  • Coverage Rates - 3m2 per litre with a 2mm x 6mm (B2) trowel
  • Open Time - 30 minutes

Literature
Similar products from Ball, F and Co Ltd