Description

STYCCOBOND B92 is a one part, solvent based synthetic resin adhesive used for installing a wide range of wood floorcoverings. It has a long open time and is quick setting to develop a high bond strength. It is protected against bio-degradation.

STYCCOBOND B92 can be used for securing wood blocks, cork, wood mosaic panels, engineered boards (semi-solids) and wood strip flooring up to a maximum length of 1.5 metres.

STYCCOBOND B92 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, and plywood (Minimum 6mm flooring grade).

STOPGAP Waterproof Surface Membranes, sound asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.

Proper subfloor preparation is essential for the correct installation of any floorcovering. Subfloors must be structurally sound, smooth, dry (<65% RH) and free from laitance and any contaminants which will affect adhesion. Use STYCCOCLEANC140 for removing grease, oil, polish, soap etc. from non-absorbent substrates.

Concrete and sand/cement screeds must be fully cured and any laitance or surface treatments must be removed. The temperature of the floor must be maintained above10ºC throughout the application and drying of the adhesive.

For detailed information, request our Subfloor Preparation Guide.

General information

Uniclass 2015

Pr_20_31_02_80 Solvent-based synthetic rubber resin adhesivesPrimary

CAWS

M42/10 Wood flooring

M42/110 Wood block flooring

M42/120 Mosaic parquet panel flooring

Specification data - Solvent-based synthetic rubber resin adhesives

Product Reference

Styccobond B92

Product Options

Technical properties:

  • Colour - Beige.
  • Coverage Rates - 500g/m2 with a 2mm x 6mm or B2 trowel or 700g/m2 with a 3mm x 6mm or B3 trowel
  • Open time - Up to 20 minutes
  • Flash point - -5C

Literature
Similar products from Ball, F and Co Ltd