NBS Source
I'm a manufacturer
Compare variants

Application

Designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

ESA Installation

  1. Select ESA/EFA according to tile thickness. 
  2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
  3. Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required. 
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower. 
  6. Fill the joint completely with grout. 

EFA Installation

  1. Select ESA/EFA according to tile thickness. 
  2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering. 
  3. Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required. 
  4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage. 
  5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower. 
  6. Fill the joint completely with grout. 




Description

Straight edge trim:

An L shaped extruded aluminium profile designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.


Formable trim:

An L shaped extruded aluminium profile designed to provide a solution to the problem of protecting edges of the floor finishes in curved areas.

In choosing aluminium as a finishing profile the suitability of its installation must be determined if chemical or mechanical stresses are anticipated.

General information

Color

Finish

Matt

Mill

Brass

Bright

Brushed

Material

Aluminium

Shape

Other

Length

2500 mm

Width

3 mm

Height

2.25 mm

3.25 mm

4.25 mm

6 mm

8 mm

Show more

Uniclass

Pr_35_90_31_32 Floor edging stripsPrimary

CAWS

M40/10 Natural stone covering to

M40/110 Tiling to

M40/115 Natural stone covering to

M40/12 Mosaic to

M40/120 Mosaic to

M40/5 Tiling to

M41/110 Terrazzo tiling

M41/120 In situ terrazzo

M41/130 Precast terrazzo

M41/140 Marble tiling

Product range

Aluminium Tile Trims

Specification data - Floor edging strips

Material

Aluminium.

Colour where exposed to view

Mill aluminium 80.

Guidance for specification option:

Standard.

Cross section size

2500 x 3 x 6 mm.

Guidance for specification option:

(L x W x D)

Profile

Formable trim.

Sustainability data

Contains Red List materials

No

Country of material origin

United Kingdom

Literature

ESA - Aluminium Straight Edge Datasheet

ESA - Aluminium Straight Edge Datasheet

Similar products from Genesis Global Systems Limited

Aluminium Angle Trim

Aluminium Angle Trim

Aluminium Contour Trim

Aluminium Contour Trim

Aluminium Pro Trim

Aluminium Pro Trim

Aluminium Slim Square Trim for Mosaic

Aluminium Slim Square Trim for Mosaic

P.V.C Straight Edge Trim

P.V.C Straight Edge Trim

P.V.C Trim Regular - Quadrant Face Profile

P.V.C Trim Regular - Quadrant Face Profile

PVC Dim Strip

PVC Dim Strip

Quadrant Trim

Quadrant Trim

Round Edge And Corner Trims

Round Edge And Corner Trims

Square Edge Trim

Square Edge Trim