Primer designed to promote the adhesion of STOPGAP smoothing underlayments to smooth non-absorbent surfaces.
STOPGAP P131 is a primer designed to promote the adhesion of STOPGAP smoothing under layments to smooth non-absorbent surfaces. It can also be used as a general purpose primer for absorbent surfaces to promote adhesion and to prevent unacceptably rapid drying of adhesives and smoothing under layments. It is suitable for use in marine applications as part of an IMO system. It is suitable for use over normal underfloor heating installations. STOPGAPP131 is coloured green to provide the user with visual control of coverage uniformity. STOPGAPP131 should be used on non-absorbent surfaces of STOPGAP waterproof surface membranes, terrazzo, power floated concrete, quarry and ceramic tiles, sound asphalt, epoxy marine primers, well bonded epoxy and polyurethane coatings and minimal existing adhesive residue. It should also be used on absorbent surfaces such as concrete, sand/cement screeds, plywood, hardboard and chip board.
M10/160 Proprietary self smoothing levelling screeds
M10/7 Proprietary quick drying levelling screeds
M42/150 Composition block flooring
M42/20 Composition block flooring
M42/30 Concrete/ Screed substrates
M50/10 Resilient floor tiling
M50/110 Resilient floor tiling
M50/130 Carpet tiling
M50/15 Carpet tiling
M50/155 PVC sheet flooring in special wet areas
M50/45 Existing floor covering removed
M50/460 Smoothing/ levelling underlayment compound