A render system for application onto masonry substrates comprising levelling coat, cement free reinforcing coat and glass fibre reinforcing mesh, suitable to accept a wide range of low maintenance facade finishes offering exceptional levels of weather protection.
The StoRend Flex Cote system offers approximately 15 times the crack resistance compared to traditional renders and can be finished with a range of Sto render finishes, StoBrick, Sto-Resin Brick Slips, Sto-Ecoshapes or enhanced with StoDeco Profiles or StoDeco Rustications. Sto through coloured render finishes are available in a variety of textures and grain sizes, and up to 1100 colours from the StoColor system and StoDesign Architectural Colour Range.
M20/160 Proprietary cement gauged render
M20/19 Proprietary render
StoRend Flex Cote
Common or facing brickwork
Disinfectant for treatment of algae/ fungal growth.
Deep penetrating, adhesion promoting, surface consolidating, absorption regulating primer typically suited to application in large areas.
Adhesion promoting, surface consolidating, absorption regulating primer suited to application in small to medium areas.
Bonding bridge for use on surfaces that are smooth and/ or of very low absorption.
Minimum thickness 6 mm, maximum thickness 12 mm per coat. Multiple coats are possible.
StoMiral FL Vario
Alternative for aerated concrete blockwork. Minimum thickness 8 mm, maximum thickness 12 mm per coat. Multiple coats are possible.
Number of coats
See 'Options' below and insert requirements.
StoArmat Classic Plus cement-free reinforcing render
Sto Glass Fibre Mesh
Decorative finish render:
Acrylic resin bound render finish used to achieve special render effects.
Acrylic resin bound render with stippled texture.
Acrylic resin bound render finish with fine grain used either alone or with Stolit K/ Stolit Effect to achieve special render effects.
Acrylic resin bound render with rustic texture.
Acrylic resin bound render with rilled texture.
Super-hydrophobic render finish with stippled texture and Lotus Effect.
Super-hydrophobic render finish with rustic texture and Lotus Effect.
Silicone resin bound hydrophobic render with stippled texture.
Silicone resin bound hydrophobic render with rustic texture.
Silicone resin bound hydrophobic render with rilled texture.
Acrylic bound render finish with exposed natural stone aggregate.
See 'Options' and insert requirement.
Sto-Bellcast Bead PVC-U
Sto-Stop Bead PVC-U
Sto-Movement Joint Bead PVC-U
Sto-PVC Mesh Angle Bead
For reinforcing 90° external angles.
Sto-Mesh Angle Flexibead Ideal
For reinforcing external angles.
For reinforcing internal angles.
Sto-Seal Bead Standard
Combined render stop bead and reinforcing mesh for use at head/ reveal interfaces.
- Type/ Overall thickness:
StoArmat Classic Plus cement free, water based, fibre reinforced, highly flexible acrylic mesh coat. Minimum thickness: 3.0 mm; thickness to be such as to ensure the reinforcing mesh is fully embedded.
Decorative finish render:
Render finishes are available in a range of up to 800 colours from the StoColor System and a further 300 colours from the Sto Architectural colours range.
Other finishes: StoBrick clay brick slips, Sto Resin Brick Slips, Sto-EcoShapes, StoDeco Profiles, StoDeco Rustications, plus other options may be used as an alternative to or in conjunction with render finishes - consult manufacturer for details.
- Colour/ Aggregate:
Refer to StoColor system and Sto Architectural colour range for colours. Consult manufacturer for details and samples.
© 2020 NBS Enterprises Ltd. All rights reserved.