SST Flex Breakout Automatic Sliding Door
Application

  • Exterior doors or interior doors.
  • Public buildings.
  • Shopping arcades.
  • Showrooms (car dealers or similar).

Description

The SST FLEX breakout sliding door looks like a standard sliding door with a fine-frame profile system (FLEX). In the event of an emergency however, users can open the door panels and sidelights by hand (breakout function). The escape route width almost to amounts the full door width for a generous through passage.

Features and benefits:

  • Excellent scope of supply.
  • Easily adapted to individual requirements.
  • Emergency exit and escape route doors with break-out panels and side screens.
  • Highly economical and reliable thanks to proven standard components.
  • Wide range of adjustable parameters.
  • Extensive provision of standard connections.
  • Safety equipment (sensors) to DIN 18650 and EN 16005 on request.
  • Supplied ready for installation – mounting and commissioning on request.

Application:

  • Exterior doors or interior doors.
  • Public buildings.
  • Shopping arcades.
  • Showrooms (car dealers or similar).

General information

Size

As drawing

Insert reference.

As schedule

Insert reference.

Uniclass 2015

Pr_30_59_24_80 Sliding door and partition setsPrimary

CAWS

L20/490 Automatic doors

Specification data - Sliding door and partition sets

Product Reference

SST Flex Breakout Automatic Sliding Door

Size

As drawing

Insert reference.

As schedule

Insert reference.

Glazing

Double glazing (Iso), 22 mm thick

Toughened safety glass, 8 mm thick

Toughened safety glass, 10 mm thick

Toughened safety glass, 12 mm thick

Special order

Insert requirement.

Frame finish

Polyester powder coating

Insert colour requirement.

Silver anodized

Fanlight

-

Type

Not required

Fanlight

Panel cover

Fanlight design

Single-piece

Three-piece

Two-piece

Glazing

Double glazing (Iso), 22 mm thick

Toughened safety glass, 8 mm thick

Toughened safety glass, 10 mm thick

Toughened safety glass, 12 mm thick

Special order

Insert requirement.

Locking

Electromechanical combined locking device with external manual lock release

Electromechanical combined locking device with internal manual lock release

Accessories

Insert requirements, many options available.

Standard product features

Technical characteristics:

  • Continuously adjustable opening speed - ES 200 operator: 100–700 mm/s.
  • Continuously adjustable closing speed: 100–500 mm/s.
  • Continuously adjustable low (creep) speed: 30–90 mm/s.
  • Supply voltage, frequency: 240 V, 50 Hz.
  • Maximum power consumption: 250 W.
  • Power supply for external components: 24 V, 2 A.
  • Class of protection: IP 20.
  • Temperature range: -20 to +60°C.
  • Admissible (relative) humidity: Maximum 93% (non-condensing).

Product Options

Size:

  • System width: Available 2520–5520 mm.
  • Clear passage size: Available 1000–2500 x 2100–2500 mm (w x h).

Similar products from dormakaba UK & Ireland