NBS Source
List your products
Description

Three chamber 75 mm polyamide window system which achieved good thermal performance.

An enhancement to the SPW 600 Suite of windows which introduces a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit (IGU) ensure the window exceeds the rigorous standards set in the Building Regulation (E&W) Approved Document L.

Flexibility:

Available in casement, tilt/turn and top swing reversible windows, suitable for educational, commercial and retail applications, transport terminals, health service buildings etc.

Construction:

Constructed with mitred and mechanically crimped or joined corners, with support chevrons and cleats to ensure accurate alignment. Integral transoms and mullions are fixed into the outer frames with screws or brackets. Joints are sealed against water ingress during assembly.

Opening lights are inserted directly into the outer frames on butt hinges or friction stays.

Vent frames can be fixed directly into the framing modules. Individual modules can be fully assembled and then transported to site.

The windows incorporate an integral polyamide thermal break.

General information
Size

As drawing

As schedule

Finish

Anodized

Insert colour requirements, 25 microns (minimum), satin or polished finish available.

Mill finish

Polyester powder coated

Insert colour requirements, 40 microns standard and 60 microns available for marine environments.

Features

Includes a polystyrene strip in the thermal break cavity alongside a backer rod situated around the insulated glazed unit

Material

Aluminium and glass

Uniclass 2015
Aluminium window units (Pr_30_59_98_02)Primary
Specification data - Aluminium window units
Product Reference

SPW 600e

Size

As drawing

As schedule

Type

Overswing

Side hung

Tilt/turn

Top hung

Finish

Anodized

Insert colour requirements, 25 microns (minimum), satin or polished finish available.

Mill finish

Polyester powder coated

Insert colour requirements, 40 microns standard and 60 microns available for marine environments.

Glazing -
Type

Insulated glass unit – Insert thickness required, 26–56 mm available

Glazing method

Inside glazed

As standard.

Outside glazed

Ironmongery/ Accessories

Manufacturer's standard

Standard product features

Size:

- Overswing open out:

  • Maximum width: 1500 mm.
  • Maximum height: 1600 mm.

- Side-hung:

  • Maximum width: 900 mm.
  • Maximum height: 1500 mm.

- Tilt-turn:

  • (Minimum)–Maximum width: (450)–1500 mm.
  • (Minimum)–Maximum height: (500)–1500 mm (heavy duty, 2200 mm).

- Top-hung:

  • Maximum width: 1500 mm.
  • Maximum height: 1500 mm.

Material:

  • Extruded aluminium: Aluminium alloy 6063.T6 to BS EN 755-9.
  • Polyamide thermal barriers are manufactured in accordance with PA66 GF25.
  • Gaskets are manufactured in accordance with BS 3734.

U-Value:

Separate figures are available for Thermal U-values depending on type of window configuration, frame and glazing material, consult manufacturer for details.

Performance:

  • Complies with BS 6375-1.
  • Air permeability: 600 Pa.
  • Watertightness: 600 Pa.
  • Wind resistance: 2400 Pa.
  • Carries a Window Energy Rating (WER) of A–C.

Security:

Tested to BS 7950, security hardware required.

Product Options

Finish:

Polyester powder coated available in single or dual colour. Consult Senior Architectural Systems for availability of colours and samples.

Glazing:

  • 28 mm double glazed can be used as standard, but other unit sizes up to 56 mm are possible depending on weight.
  • Each pane of glass is individually inserted into a fully rebated and prepared opening.
  • Various glazing options are available to maximize thermal and acoustic performance. Consult Senior Architectural Systems for details.
  • Internal beading is standard, with external beading an option on outward opening windows.

Digital objects
PlatformCompatibleVersionCertified to
Revit
Revit 2016 4 2.0
IFC
IFC2X3 3 1.3
Download now from NBS National BIM Library
Literature
Similar products from Senior Architectural Systems Ltd