NBS Source
List your products
Description

Horizontal or inclined panel, aerofoil or box section blade, adjustable angle aluminium louvre solar shading.

Features:

  • Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
  • Choice of blade type and centres.
  • Blade orientation adjustable through 90º.
  • Blades can be matched to Icarus fixed louvre units, vertical units, to Icarus Patio and to Loggia sliding units.

General information
Size

Insert requirement or 'As Drawing'.

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Features

Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications

Choice of blade type and centres

Blade orientation adjustable through 90º

Blades can be matched to Icarus fixed louvre units, vertical units, to Icarus Patio and to Loggia sliding units

Material

Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy

End plates: Aluminium alloy (AlMg3)

Pivot sleeves: Stainless steel, mounted centrally in aluminium end caps

Bearings and circlips: UV-resistant synthetic material

Screws and fasteners: Stainless steel sheet-metal

Uniclass 2015
Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary
CAWS

L10/59 Solar shading system

L10/670 Brises soleil

Specification data - Carbon steel brise-soleil units
Product Reference

Solar Shading Elliptical Icarus® Horizontal Movable

Size

Insert requirement or 'As Drawing'.

Support profiles

Aluminium

Galvanized steel

Blades

ICA.100

Aerofoil, 100 mm section width.

ICA.125

Aerofoil, 125 mm section width.

ICA.150

Aerofoil, 150 mm section width.

ICA.200

Aerofoil, 200 mm section width.

ICA.250

Aerofoil, 250 mm section width.

ICA.300

Aerofoil, 300 mm section width.

ICA.360

Aerofoil, 360 mm section width.

ICA.400

Aerofoil, 400 mm section width.

ICA.480

Aerofoil, 480 mm section width.

ICL.200

Aerofoil/ block, 200 mm section width.

ICP.150

Block, 150 x 30 mm (w x d) section.

ICP.200/30

Block, 200 x 30 mm (w x d) section.

ICP.200/40

Block, 200 x 40 mm (w x d) section.

Operation

Electric, type 100

Tube motor. Length between fixing points: 530 mm.

Electric, type 200

Tube motor. Length between fixing points: 630 mm.

Manual, direct

Knob mounted on transmission bar.

Manual, cable

With remote winding handle. Length (maximum): 5 m.

Submit proposal

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Standard product features

Material:

  • Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy.
  • End plates: Aluminium alloy (AlMg3).
  • Pivot sleeves: Stainless steel, mounted centrally in aluminium end caps.
  • Bearings and circlips: UV-resistant synthetic material.
  • Screws and fasteners: Stainless steel sheet-metal.

Fixing:

The support profiles are attached directly to RENSON® brackets.

Product Options

Brackets:

Aluminium or galvanized steel, according to overhang, blade weight, and wind and snow load. Contact manufacturer for more information.

Blades:

Indicative maximum spans for typical wind pressures:

  • ICA.100 blade: 1.87 m (650 Pa), 1.75 m (800 Pa), 1.52 m (1250 Pa).
  • ICA.125 blade: 2.08 m (650 Pa), 1.95 m (800 Pa), 1.70 m (1250 Pa).
  • ICA.150 blade: 2.54 m (650 Pa), 2.39 m (800 Pa), 2.07 m (1250 Pa).
  • ICA.200 blade: 2.79m (650 Pa), 2.62 m (800 Pa), 2.27 m (1250 Pa).
  • ICA.250 blade: 3.19 m (650 Pa), 2.99 m (800 Pa), 2.60 m (1250 Pa).
  • ICA.300 blade: 3.69 m (650 Pa), 3.46 m (800 Pa), 3.10 m (1250 Pa).
  • ICA.360 blade: 4.28 m (650 Pa), 4.02 m (800 Pa), 3.50 m (1250 Pa).
  • ICA.400 blade: 4.32 m (650 Pa), 4.07 m (800 Pa), 3.54 m (1250 Pa).
  • ICA.480 blade: 5.17 m (650 Pa), 5.17 m (800 Pa), 4.59 m (1250 Pa).
  • ICL.200 blade: 2.98 m (650 Pa), 2.80 m (800 Pa), 2.43 m (1250 Pa).
  • ICP.150 blade: 3.12 m (650 Pa), 2.94 m (800 Pa), 2.55 m (1250 Pa).
  • ICP.200/30 blade: 3.17 m (650 Pa), 2.98 m (800 Pa), 2.595 m (1250 Pa).
  • ICP.200/40 blade: 3.83 m (650 Pa), 3.83 m (800 Pa), 3.37 m (1250 Pa).

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Literature
Similar products from Renson Fabrications Ltd