NBS Source
List your products
Description

Vertical, permanent sun protection with multiple blades mounted between end plates to form cassettes. Any blade pitch and inclination can be chosen. Any version of the end plates is also possible. Reduces solar heat gain. Blades can be matched to Icarus adjustable louvre units, horizontal units, to Icarus Patio and to Loggia sliding units.

General information

Size

Insert requirement or 'As Drawing'.

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Material

Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy

End plates: Aluminium alloy (AlMg3) or steel. The thickness is calculated as a function of the dimensions, weight and local wind load

Screws and fasteners: Stainless steel sheet-metal, galvanized and powder coated

Uniclass 2015

Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary

CAWS

L10/59 Solar shading system

L10/670 Brises soleil

Specification data - Carbon steel brise-soleil units

Product Reference

Solar Shading Elliptical Icarus® Vertical Cassettes

Size

Insert requirement or 'As Drawing'.

Fixing

End plates

For direct fixing to façade.

Knife brackets

Pre-mounted on façade.

Blades

-

Type

ICA.100

Aerofoil, 100 mm section width.

ICA.125

Aerofoil, 125 mm section width.

ICA.150

Aerofoil, 150 mm section width.

ICA.200

Aerofoil, 200 mm section width.

ICA.250

Aerofoil, 250 mm section width.

ICA.300

Aerofoil, 300 mm section width.

ICA.360

Aerofoil, 360 mm section width.

ICA.400

Aerofoil, 400 mm section width.

ICA.480

Aerofoil, 480 mm section width.

ICL.200

Aerofoil/ block, 200 mm section width.

ICP.60

Block, 60 x 10 mm (w x d) section.

ICP.150

Block, 150 x 30 mm (w x d) section.

ICP.200/30

Block, 200 x 30 mm (w x d) section.

ICP.200/40

Block, 200 x 40 mm (w x d) section.

Angle

45º

60º

75º

90º

Special order

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Standard product features

Material:

  • Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy.
  • End plates: Aluminium alloy (AlMg3) or steel. The thickness is calculated as a function of the dimensions, weight and local wind load.
  • Screws and fasteners: Stainless steel sheet-metal, galvanized and powder coated.

Product Options

Blades:

Indicative maximum spans for typical wind pressures:

  • ICA.100 blade: 2.28 m (650 Pa), 2.105 m (800 Pa), 1.795 m (1250 Pa).
  • ICA.125 blade: 2.47 m (650 Pa), 2.29 m (800 Pa), 1.965 m (1250 Pa).
  • ICA.150 blade: 3.145 m (650 Pa), 2.89 m (800 Pa), 2.44 m (1250 Pa).
  • ICA.200 blade: 3.59 m (650 Pa), 3.285 m (800 Pa), 2.755 m (1250 Pa).
  • ICA.250 blade: 4.11 m (650 Pa), 3.745 m (800 Pa), 3.125 m (1250 Pa).
  • ICA.300 blade: 4.615 m (650 Pa), 4.515 m (800 Pa), 3.73 m (1250 Pa).
  • ICA.360 blade: 5.28 m (650 Pa), 5.25 m (800 Pa), 4.34 m (1250 Pa).
  • ICA.400 blade: 5.325 m (650 Pa), 5.325 m (800 Pa), 4.475 m (1250 Pa).
  • ICA.480 blade: 6 m (650 Pa), 6 m (800 Pa), 5.88 m (1250 Pa).
  • ICL.200 blade: 3.75 m (650 Pa), 3.45 m (800 Pa), 2.9 m (1250 Pa).
  • ICP.60 blade: 1.435 m (650 Pa), 1.335 m (800 Pa), 1.15 m (1250 Pa).
  • ICP.150 blade: 3.7 m (650 Pa), 3.415 m (800 Pa), 2.91 m (1250 Pa).
  • ICP.200/30 blade: 3.91 m (650 Pa), 3.615 m (800 Pa), 3.05 m (1250 Pa).
  • ICP.200/40 blade: 4.735 m (650 Pa), 4.675 m (800 Pa), 3.935 m (1250 Pa).

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Literature
Similar products from Renson Fabrications Ltd

© 2020 NBS Enterprises Ltd. All rights reserved.