NBS Source
List your products
Description

Vertical, permanent visual barrier or sun shading. Ideal for use as sun shading on east or west facing walls.

Features:

  • Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
  • Extruded aluminium blades. Choice of blade type, angle, centres and finish.
  • Blades can be matched to Sunclips horizontal louvre units, to and to Sunclips Patio sliding units.

General information

Size

Insert requirement or 'As Drawing'.

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Features

Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications

Extruded aluminium blades. Choice of blade type, angle, centres and finish

Blades can be matched to Sunclips horizontal louvre units, to and to Sunclips Patio sliding units

Material

Aluminium extrusion profile in EN AW-6063 T66 alloy

Uniclass 2015

Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary

CAWS

L10/59 Solar shading system

L10/670 Brises soleil

Specification data - Carbon steel brise-soleil units

Product Reference

Solar Shading Brise Soleil Sunclips® Vertical on Mullions

Size

Insert requirement or 'As Drawing'.

Fixing

Knife brackets

Pre-mounted on façade.

RENSON® brackets

For direct fixing to façade.

Support profiles

SD.014, horizontal framing or projecting arm

40 x 14.5 mm (w x d).

SD.054, horizontal framing or projecting arm

40 x 54 mm (w x d).

SD.100, horizontal framing or projecting arm

40 x 100 mm (w x d).

Blades

-

Type

SC.096

Blade width 96 mm.

SE.096.01

Blade width 96 mm.

SE.096.02

Perforated, blade width 96 mm.

SE.130

Blade width 130 mm.

SE.176

Blade width 176 mm.

Angle

45º

Standard.

Special order

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Extension panels

Not required

Required

Pre-fabricated panels for extension purposes such as to allow for window cleaning.

Standard product features

Material:

Aluminium extrusion profile in EN AW-6063 T66 alloy.

Fixing:

The end plates are attached directly to a load-bearing substructure.

Product Options

Blades:

Indicative maximum spans for typical wind pressures:

  • SC.096 blade: 0.8 m (650 Pa), 0.75 m (800 Pa), 0.6 m (1250 Pa).
  • SE.096 blade: 1.35 m (650 Pa), 1.22 m (800 Pa), 1.0 m (1250 Pa).
  • SE.130 blade: 2.0 m (650 Pa), 1.8 m (800 Pa), 1.44 m (1250 Pa).
  • SE.176 blade: 2.0 m (650 Pa), 1.8 m (800 Pa), 1.44 m (1250 Pa).

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Literature
Similar products from Renson Fabrications Ltd