NBS Source
List your products
Description

Vertical, permanent sun protection with multiple blades mounted between end plates to form cassettes. Any blade pitch and inclination can be chosen. Any version of the end plates is also possible. The cassettes can be delivered to the site fully pre-assembled. Attachment of the cassettes directly to the load bearing substructure is via standard brackets or attachment to knife brackets.

Features:

  • Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
  • Choice of blade angle and centres.
  • Blades can be matched to Sunclips fixed horizontal or vertical louvre units.

General information

Size

Insert requirement or 'As Drawing'.

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Features

Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications

Choice of blade angle and centres

Blades can be matched to Sunclips fixed horizontal or vertical louvre units

Material

Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy

End plates: Aluminium alloy (AlMg3) or steel. The thickness is calculated as a function of the dimensions, weight and local wind load

Screws and fasteners: Stainless steel sheet-metal, galvanized and powder coated

Uniclass 2015

Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary

CAWS

L10/59 Solar shading system

L10/670 Brises soleil

Specification data - Carbon steel brise-soleil units

Product Reference

Solar Shading Brise Soleil Sunclips® Vertical Cassettes

Size

Insert requirement or 'As Drawing'.

Fixing

Knife brackets

Pre-mounted on façade.

Standard brackets

For direct fixing to façade.

Blades

-

Type

SE.096.01

Blade width 96 mm.

SE.096.02

Perforated, blade width 96 mm.

SE.130

Blade width 130 mm.

SE.176

Blade width 176 mm.

Angle

45º

Standard

Special order

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Standard product features

Material:

  • Blades: Aluminium extrusion profile in EN AW-6063 T66 alloy.
  • End plates: Aluminium alloy (AlMg3) or steel. The thickness is calculated as a function of the dimensions, weight and local wind load.
  • Screws and fasteners: Stainless steel sheet-metal, galvanized and powder coated.

Product Options

Blades:

Indicative maximum spans for typical wind pressures:

  • SE.096 blade: 1.35 m (650 Pa), 1.22 m (800 Pa), 1.0 m (1250 Pa).
  • SE.130 blade: 2.0 m (650 Pa), 1.8 m (800 Pa), 1.44 m (1250 Pa).
  • SE.176 blade: 2.0 m (650 Pa), 1.8 m (800 Pa), 1.44 m (1250 Pa).

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Literature
Similar products from Renson Fabrications Ltd