NBS Source
List your products
Description

Overhanging permanent awning where the blades are screwed in place between end plates. This application can be horizontal or projecting at an angle. The cassettes can be delivered to the site fully pre-assembled.

Features:

  • Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications.
  • Choice of mounting and angle.
  • Choice of blade, angle, centres and finish.
  • Blades can be matched to Sunclips vertical units and to Sunclips Patio vertical sliding units.

General information

Size

Insert requirement or 'As Drawing'.

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Features

Reduces solar heat gain. Manufacturer offers sunpath diagram analysis, loading analysis and component proposals related to wind conditions of proposed applications

Choice of mounting and angle

Choice of blade, angle, centres and finish

Blades can be matched to Sunclips vertical units and to Sunclips Patio vertical sliding units

Material

Aluminium extrusion profile in EN AW-6063 T66 alloy

Uniclass 2015

Pr_30_59_09_15 Carbon steel brise-soleil unitsPrimary

CAWS

L10/59 Solar shading system

L10/670 Brises soleil

Specification data - Carbon steel brise-soleil units

Product Reference

Solar Shading Brise Soleil Sunclips® Horizontal Cassettes

Size

Insert requirement or 'As Drawing'.

Blades

-

Type

SC.096

Blade width 96 mm.

SE.130

Blade width 130 mm.

SE.176

Blade width 176 mm.

Angle (from horizontal)

45º

60º

75º

90º

Special order

Finish

Anodized

20 µ.

Polyester powder coating, RAL

Insert colour requirement, 60–80 µ.

Polyester powder coating, Syntha Pulvin

Insert colour requirement, 60–80 µ.

Standard product features

Material:

Aluminium extrusion profile in EN AW-6063 T66 alloy.

Fixing:

Knife brackets pre-mounted on façade.

Product Options

Finish:

Other anodized or polyester powder coating finishes may be available to special order.

Accessories:

Mullion end caps are for use when a fascia profile is not required.

Intermediate mullion:

An SD.014 intermediate mullion with standard clips may be needed, depending on the unsupported span of the blades and the local wind load.

Literature
Similar products from Renson Fabrications Ltd