NBS Source
List your products
Description

Gilgen SLX sliding door operators are designed, constructed and installed to satisfy BS EN 16005:2012, and are tested for one million cycles, providing proven reliability. The operators also comply with Building Regulations (E&W) Approved Document B and M, The Equality Act 2010 and BS 8300:2009.

The integration of a number of technological advancements such as CanBus technology for enhanced operational safety and bluetooth wireless technology for easier access and control ensure the doors are suitability for a wide variety of applications such as retail, hotels, offices, airports, stations, hospitals, schools, colleges, garden centres and leisure.

All equipment is installed by Automatic Door Suppliers Association (ADSA) accredited engineers.

General information
Finish

Polyester powder coated, RAL

Insert colour requirements.

Silver anodized

Stainless steel cladding, brushed

Stainless steel cladding, mirrored

Stainless steel cladding, patterned

Insert requirements.

Stainless steel cladding, satin

Uniclass 2015
Sliding door and partition sets (Pr_30_59_24_80)Primary
Specification data - Sliding door and partition sets
Product Reference

SLX Automatic Sliding Door System

Door -
Door configuration

Bi-parting, no fixed panels

Bi-parting, two fixed glazed panels

Bi-parting with full emergency break out (doors and glazed screens)

Bi-parting with partial emergency break out (doors only)

Single slide, no fixed panels

Single slide, one fixed panel

Clearance width

700–3000 mm single sliding; 800–4000 mm bi-parting; 1000–2500 mm bi-parting models with break out.

Height

2000–3000 mm; insert requirements.

Midrail

Not required

Required

Consult manufacturer for details.

Finish

Polyester powder coated, RAL

Insert colour requirements.

Silver anodized

Stainless steel cladding, brushed

Stainless steel cladding, mirrored

Stainless steel cladding, patterned

Insert requirements.

Stainless steel cladding, satin

Drive operation

Standard SLX

Standard SLX plus booster

Standard SLX drive plus dual motor

Heavy duty SLX

Heavy duty SLX with booster

Heavy duty SLX drive plus dual motor

Glazing

Installation specific; please consult manufacturer and insert requirements.

Control

D Bedix hard wired control unit

F key

Kombi D Bedix

Portable Bedix wireless unit

Six position key switch

Activation

Integration with access control systems

Manual push pad

Motion sensors

Touch-free push pad

Locking and security

Installation specific; please consult manufacturer and insert requirements.

Door movement guide

Recessed floor track

Not suitable if break out option required.

Surface mounted fixed point guide

Rear door safety

Installation specific please consult manufacturer.

Standard product features

Door profile:

40 mm thick.

Drive system:

SLX sliding door drive system integrates Bluetooth wireless control technology and a powerful, near silent drive into a very slender profile. System components are connected via a can-bus, which not only guarantees smooth and reliable operation, but also facilitates constant communication with the processor to ensure optimum operational safety.

Safety:

  • Combined presence and activation sensing devices ensure door opening distances are in accordance with BS EN 16005, prevent doors closing on pedestrians within the threshold area and provide a signal to the door control system, thereby optimising pedestrian safety.
  • Rear edge sensors (electro sensitive protection equipment, ESPE) complying with BS EN 16005 are located within the door operator to maintain back of door safety and protect pedestrians against crushing edges at the main closing edge.
  • Fail-safe system (battery back-up) enables up to 30 minutes operation (subject to use) in the event of a mains failure. The fail safe system is automatically tested at least once every 24 hours.
  • Fire alarm interface connection enables door leaves to fail safe to open in the event of an emergency. In compliance with BS EN 16005 door sets with a clear opening width of up to 2000 mm open by at least 80% within 3 seconds after activation by the activators in the escape direction (or within 5 seconds in the event of the loss of power.)

Operation:

24 V DC motor with microprocessor controller which allows extensive options for opening width, electric locking, summer/ winter modes, exit only, manual control, speed of opening and the length of time the door is open.

Power requirements:

230 V single phase. A 13 A live neon-lit fused spur supply, protected by a 30 mA RCD must be provided prior to installation. In order to comply with BS EN 16005 the mains connection must be capable of disconnection to prevent unintentional and unauthorised reactivation.

Product Options

Door leaf:

- Width:

Single sliding:

  • Standard SLX drive: 700–2000 mm.
  • Heavy duty SLX drive: 800–3000 mm.
  • Heavy duty SLX drive with booster: 1100–3000 mm.

Bi parting:

  • Standard SLX drive: 800–3000 mm.
  • Standard SLX drive with booster: 1000–3000 mm.
  • Standard SLX drive dual motor: 1100–3000 mm.
  • Heavy duty SLX drive dual motor: 1200–4000 mm.
  • Standard SLX drive with break out: 1000–2500 mm.

- Height:

2000–3000 mm - Nominal depending upon location and door panel width and weight.

- Weight:

  • 1 x 150 kg (standard SLX drive).
  • 1 x 240 kg (heavy duty SLX drive).
  • 1 x 400 kg (heavy duty SLX drive with booster).
  • 2 x 120 kg (standard SLX drive).
  • 2 x 150 kg (standard SLX drive plus booster or dual motor).
  • 2 x 240 kg (heavy duty SLX drive dual motor).

- Configuration (break out solutions only):

The bi-parting sliding door system with break out is designed to provide a convenient, barrier free access in day-to-day situations, while guaranteeing a safe exit for occupants and easy entry for emergency services in the event of a fire. In compliance with BS EN 16005 door leaves (or door set leaves and side screens) are capable of being broken out from any position in the direction of escape. The total force to release the break out function does not exceed 220 N.

Rear door safety:

Several options are available, subject to installation considerations. Please consult the manufacturer. The options available are;

  • 900 mm high, firmly secured, solid glazed barrier, in accordance with BS EN 16005.
  • 2.5 m high, fully glazed pocket screen complying with BS EN 16005.

Security:

A key turn manual hook lock (with steel insert in the leading edge for improved security and strength) is included as standard however there are a range of options available such as in head electric locks and multi point locking for added security. Integration with access control systems is also achievable. Please consult manufacturer.

Control:

  • D Bedix hard wired programming key pad (incorporating digital display screen). Designed for installation in a central control panel. Configured for Automatic/ Manual/ Night/ Exit/ Open door operating modes.
  • Portable Bedix wireless control unit designed to enable selection of operating modes (as per D Bedix) and configure parameters. Simple menu based controls. No fixed location required. Password protected.
  • Kombi D Bedix, push button control (as standard D Bedix) incorporating additional security key to prevent unauthorized access.
  • F Key: Multi user, compact programmable portable unit enabling restricted personnel access.
  • Six position key switch. Single point door control but with NO fault identification.

Operation:

Additionally, the door allows for fitting of door position switches, fire or smoke alarm signals and voice message systems to assist partially sighted people and integrates with access control systems.

Glazing:

  • Single or double glazed with a range of U-values as low as 1.6 W/m²K.
  • Tinted glazing.
  • For added security glazing complete with bomb blast resistant film can readily be supplied.
  • Glazing complete with etched in logos.
  • Glazed fan lights.

Door movement guide:

  • Surface mounted fixed point guide enhances efficiency of door movement.
  • Recessed floor track, helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Recessed floor track:

Helps further improve door security as well as improved weather sealing and resistance to strong winds and driving rain.

Third party certifications
  • CE approved
  • TUV NORD
  • DIN18650-1 and DIN 18650-2 2005 and 2010
  • ISO 9001: 2008
Similar products from Gilgen Door Systems UK Ltd