Sliding Brick Anchors
A range of sliding brick anchors.
Designed to accommodate vertical movement and are supplied with one way and/or two way ties to provide a mechanical tie between masonry cladding and the structure.
Available in three lengths and various head details with 12 mm diameter fixing holes as standard. Specials available on request.
The stems are designed to fit within the cavity and take ties that will slide up and down to allow for vertical movement. Designed to resist wind loads of up to 1.5 kN.
| Size | 350 WT75CHT / WT75BHT / WT75B / WT75EO / WT75L / WT75C / WT75T / WT75EHT / WT75E. 500 WT75CHT / WT75BHT / WT75B / WT75EO / WT75L / WT75C / WT75T / WT75EHT / WT75E. 600 WT75CHT / WT75BHT / WT75B / WT75EO / WT75L / WT75C / WT75T / WT75EHT / WT75E. |
| Material | Grade 1.4301 (304) stainless steel Standard. Grade 1.4401 (316) stainless steel Optional. |
| Uniclass 2015 | |
| CAWS | F30/251 Wall head restraint slip ties |
| Product Reference | WT75CHTCranked half twist head. WT75BHTBent half twist head. WT75BBent head. WT75EOExtended side fixing head. WT75LSoffit fixing offset head. WT75CSoffit fixing central head. WT75TSoffit fixing longitudinal head. WT75EHTHalf twist head. WT75ESide fixing. WT75T1Sliding anchor one way tie. WT75T2Sliding anchor two way tie. |
| Size | 350WT75CHT / WT75BHT / WT75B / WT75EO / WT75L / WT75C / WT75T / WT75EHT / WT75E. 500WT75CHT / WT75BHT / WT75B / WT75EO / WT75L / WT75C / WT75T / WT75EHT / WT75E. 600WT75CHT / WT75BHT / WT75B / WT75EO / WT75L / WT75C / WT75T / WT75EHT / WT75E. |
| Ties | - |
| Type | WT75T1 Sliding Brick Anchor One way tie100, 125, 150. 175, 200 mm. WT75T2 Sliding Brick Anchor Two way tie200, 225, 250, 275, 300 mm. |
| Size | 100125150175200225250275300 |
| Material | Grade 1.4301 (304) stainless steelStandard. Grade 1.4401 (316) stainless steelOptional. |
| Accessories | NoneWBEBM10M10 expansion bolt for fixing to concrete. WBXSM10M10 Xylan coated setscrew complete with neoprene isolation washer. WIP75Neoprene isolating patch for fixing to steelwork. |
| Standard product features | Standard fixing hole: 12 mm diameter to suit M10 fixings. Minimum tie spacing: 150 mm. Minimum number of ties per stem: 2 |
| Product Options | Product reference: Wincro WT75CHT Sliding Anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75CHT an offset stem and a single 12 mm hole to allow fixing to the face of the structure. Wincro WT75BHT sliding anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75BHT has an offset stem and a single 12 mm hole to allow fixing to the underside of a structural member. Wincro WT75B sliding anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75B has a single 12 mm hole to allow fixing to the underside of a structural member. Wincro WT7EO sliding anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75EO has a single 12 mm hole to allow fixing to the face of the structure. Wincro WT75L sliding anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75L has an offset stem and two 12 mm holes to allow fixing to the underside of a structural member. Wincro WT75T sliding anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75T has two 12 mm holes in line with the stem to allow fixing to the underside of a structural member. Wincro WT75C sliding anchors: Restraint for the head of a cavity wall. The stem fits within the cavity and will accept either WT75T1 or WT75T2 ties. The WT75C has two12mm holes at right angles to the stem to allow fixing to the underside of a structural member. |