NBS Source
List your products
Description

GTEC Standard Board is a gypsum board for partitions, linings and ceilings where normal fire, structural and acoustic levels are specified. It is available with square or tapered edges in a variety of sizes. Tapered edge boards for taping and jointing to achieve a flush finish or for a single coat gypsum plaster finish. Square edge boards for textured finishes or undecorated applications as well as being suitable to receive gypsum plaster.

Features and benefits:

Available in a wide range of sizes to minimize waste.

General information
Material

Aerated calcium sulfate di-hydrate enclosed inside a tough paper with bound edges. Core and papers are bonded with starch. PVA edge glue

Uniclass 2015
Vapour check gypsum plasterboards (Pr_25_71_52_94)Primary
Specification data - Vapour check gypsum plasterboards
Product Reference

Siniat Standard Board

Thickness

9.5 mm

5.95 kg/m², thermal resistance (R-value): 0.05 m²K/W.

12.5 mm

8 kg/m², thermal resistance (R-value): 0.066 m²K/W.

15 mm

10 kg/m², thermal resistance (R-value): 0.079 m²K/W.

Standard product features

Material:

Aerated calcium sulfate di-hydrate enclosed inside a tough paper with bound edges. Core and papers are bonded with starch. PVA edge glue.

Colour:

Ivory on the front and grey on the rear face.

Edges:

Tapered down the long edges.

Size (w x l):

1200 x 2400 mm.

Technical properties:

  • Thermal conductivity (to BS EN 12524): 0.19 W/m·K.
  • Water vapour resistance factor (to BS EN 12524): μ = 10.
  • Moisture content: <2%.
  • Longitudinal breaking load (to BS EN 520): 9.5 mm thickness: ≥400 N; 12.5 mm thickness: ≥550 N; 15 mm thickness: ≥650 N.
  • Transverse breaking load (to BS EN 520): 9.5 mm thickness: ≥160 N; 12.5 mm thickness: ≥210 N; 15 mm thickness: ≥250 N.
  • Nail and screw pull through: >300 N.
  • Reaction to fire: A2-s1, d0.

Similar products from Siniat