Single Phase Electric Roller Shutters

Application

Suitable for loading bays, factories, warehouses and any applications where security is required, representing a reliable and efficient closure for most applications.

Description

Steel roller shutters, which are operated via a single-phase electric motor. Roller shutters provide a virtually unobstructed opening, and when open, the shutter and mechanism are out of the way above the doorway, and clear of any risk of damage from vehicles moving through the opening. The doors are robust and have a long life, with little maintenance required.


Features and benefits:

  • Curtain: Constructed from 76 mm curved section galvanized steel laths, with steel end locks fitted to alternate laths to prevent lateral movement. The bottom rail is a galvanized steel inverted 'tee' section.
  • Guides: the side guides are formed from galvanized steel channels and prepared for fixing to the opening structure by means of continuous fixing angles.
  • End plates: fabricated from carbon steel of adequate thickness relative to door size, and supplied with angles for fixing to the structure.
  • Roller: the roller is manufactured from carbon steel tube of sufficient diameter and wall thickness to resist deflection, and is mounted on bearings or in cups on each end plate.
  • Operation: electrical operation is by means of a single-phase tubular motor. A safety brake is fitted to all shutters where personnel could pass underneath, thus meeting all relevant health and safety requirements. The client should provide a fused spur within 500 mm of the motor position.
  • Controls: the standard method of control is by means of internal, wall-mounted push-buttons. Other types of control, including key switches and group controls, are available at extra cost.
  • Casings: coil casings fabricated from galvanized steel sheet are available as an optional extra.

General information

Size

Bespoke; consult manufacturer for details and insert requirements.

Color

A range of RAL colours available.

Self-coloured

Finish

Galvanized

Standard.

Polyester powder-coated

Optional.

Material

Carbon steel

Shape

Square

Rectangular

WarrantyDescription

12 months

Uniclass 2015

Pr_30_59_84_73 Roller shuttersPrimary
Pr_30_59_57_76 Security shutters

CAWS

L20/610 Roller shutters/ curtains

Specification data - Roller shutters Enhanced data

Opening sizes

Insert requirement, available up to 5 x 5 m as standard (clear width x clear height), available up to 7 x 5.5 m as special order (clear width x clear height).

-

Format

External.

Arrangement

Vertical, face-fitted across opening.

Vertical, fitted into reveal.

Performance

-

Resistance to wind load

To BS EN 12424, class 5.

Shutter curtain.

-

Lath material

Carbon steel.

Profile

Flat.

51 mm flat – Standard, for smaller openings.

102 mm flat – For industrial and exposed locations.

Curved.

Traditional.

Finish and colour

Polyester powder-coated.

Insert requirement.

Self-coloured.

Frame and guides

-

Material

Carbon steel.

Finish

Galvanized.

Standard.

Polyester powder-coated.

Stainless steel.

Colour

Insert RAL colour requirement, or type 'Not applicable' for Galvanized or Stainless steel.

-

Operation

-

Mode

Automatic.

Electrical via a 230 V nominal, single-phase tubular motor.

Control

Internal, wall-mounted push-buttons

-

Accessories

None.

Building management system (BMS) linkage.

Card reader.

Galvanized steel coil casing.

Light curtain.

Motor casing and fascias.

Photocells.

Radar.

Status indicator.

Product Reference

Single Phase Electric Roller Shutters

Size

Bespoke; consult manufacturer for details and insert requirements.

Lath design

Perforated.

Punched.

Weight

35 kg/m².

Typically 35 kg/m², dependent upon the size and lath configuration.

Similar products from Bolton Gate Company