SILCOR® 900MP
Verified by manufacturer over a year ago
BBA Agrément Certificate
Certificate type
Two-part, spray-applied waterproofing membrane.
Application
- Roofs.
- Podium decks.
- Terraces.
- Walkways and foot bridges.
- Balconies.
- Green/planted roofs.
Description
A premium performance two-component spray-applied seamless waterproofing membrane that rapidly cures to form a high-strength, elastomeric, and fully-bonded waterproof membrane. Unlike conventional liquid membranes, Silcor 900MP is extremely durable with excellent wear and chemical resistance and does not normally require additional protection against mechanical damage.
Features and benefits:
- Continuous waterproofing integrity.
- Will accept foot traffic after 5 minutes.
- No protection needed.
- Spray-applied for maximum coverage per day.
- Eliminates water migration to prevent water tracking. Accommodates movements and bridges concrete shrinkage cracks.
- Tough with excellent wear and damage resistance.
- Excellent fuel and chemical resistance.
General information
Uniclass | |
CAWS | J31/353 Waterproof coating J31/5 Cold deck roof coating |
Specification data - Liquid tanking resins
Composition | Elastomeric. |
Primer | Silcor® Primer EPF. Guidance for specification option: Two-part epoxy primer. Silcor® P20 PU Primer. Guidance for specification option: Polyurethane primer. Silcor® Primer EPF. Guidance for specification option: Two-part epoxy primer. Silcor® Primer EP LT. Guidance for specification option: Three-component epoxy primer for cementitious and masonry substrates. Fast curing at low temperatures. Silcor® Primer MT. Guidance for specification option: Two-component phosphate/epoxy primer for metal substrates. |
Accessories | Not required. Dry Quartz Silica Sand. Guidance for specification option: For use with primers. Hydroduct. Guidance for specification option: Geocomposite drainage/ irrigation membrane. Hydroduct Root Barrier. |
Tensile strength (minimum) | 18 Mpa. |
Elongation | > 300%. |
Tear resistance | > 64 N/mm. |
Water vapour permeability | 9.9 g/m²/day. |
Methane permeability | 30.6 ml/m²/day. |
Shore A hardness | 91 A, 41 D. |
Abrasion resistance | 255 mg. |
Specific gravity | 1.03 g/cm³, 1.11 g/cm³. |
Resistance to wind load | >50 kPa. |
Fire rating | Class E. |
Third-party certification | BBA Certificate. |
BIM objects
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
| Platform | Compatible | Version |
|---|---|---|
 Revit | - | 1 |
 IFC | - | 1 |
Third party certifications
Literature
SILCOR® Seamless Waterproofing