Sikafloor® 262 AS Thixo

Description

Sikafloor® 262 AS Thixo is a two component, coloured, electrostatically conductive resin flooring giving a textured or standard finish.

Suitable areas of application:

  • Computer rooms.
  • Explosion risk areas.
  • Print shops and paint booths.
  • Manufacturing facilities.
  • Electronics assembly.
  • Aircraft hangars.
  • Laboratories.
  • Power plants.
  • Pharmaceutical production areas.
  • Vehicle assembly facilities.

Preparation:

The cementitious substrate should be sound and of sufficient compressive strength (minimum 25 N/ mm²) and pull off strength (minimum 1.5 N/mm²). The surfaces must be dry and free of all contaminants, e.g. oils, grease, surface treatments and coatings, etc. The substrate must be prepared mechanically to achieve an open textured fine gripping surface, free of cement laitance. Weak concrete should be removed and surface defects such as blowholes and voids must be fully exposed. All dust, loose and friable material must be completely removed, preferably by brush and vacuum, from all surfaces before application of the coating. Repairs to cementitious substrates and filling of blowholes, levelling of irregularities, etc. should be carried out using an appropriate product from the SikaDur®, Sikafloor® or SikaGard® range of materials. Prior to application, confirm substrate moisture content and RH. If >4% by weight and >75% RH, Sikafloor® EpoCem® may be applied as a DPM system.

Other requirements:

Consult with manufacturer for application of earthing plates and connectors.

General information

Uniclass 2015

Pr_35_31_68_70 Resin floor coatingsPrimary

Product range

Flooring

Specification data - Resin floor coatings

Product Reference

Sikafloor® 262 AS Thixo

Colour

Insert requirement.

Product Options

System:

  • Two component system: 1 coat Sikafloor 220W; 1 coat Sikafloor 262AS Thixo.
  • Three component system: 1 coat Sikafloor 156 scratch coat; 1 coat Sikafloor 220W; 1 coat Sikafloor 262AS Thixo.