NBS Source
List your products
Sikafloor® 20 PurCem
Description

Sikafloor® 20 PurCem is a three component, water based, high strength, coloured polyurethane resin floor screed suitable for floors subject to heavy loading, abrasions and chemical exposure.

Suitable areas of application:

  • Food process plants.
  • Warehouses.
  • Chemical plants.
  • Pharmaceutical plants.
  • Power plants.
  • Storage areas.
  • Plant rooms.
  • Processing areas.
  • Laboratories.
  • Workshops.
  • Cold stores.

Preparation:

The cementitious substrate should be sound and of sufficient compressive strength (minimum 25 N/ mm²) and pull off strength (minimum 1.5 N/mm²). The surfaces must be dry and free of all contaminants, e.g. oils, grease, surface treatments and coatings, etc. The substrate must be prepared mechanically to achieve an open textured fine gripping surface, free of cement laitance. Weak concrete should be removed and surface defects such as blowholes and voids must be fully exposed. All dust, loose and friable material must be completely removed, preferably by brush and vacuum, from all surfaces before application of the coating. Repairs to cementitious substrates and filling of blowholes, levelling of irregularities, etc. should be carried out using an appropriate product from the SikaDur®, Sikafloor® or SikaGard® range of materials. Prior to application, confirm substrate moisture content. If >10% by weight, Sikafloor® EpoCem® may be applied as a DPM system.

General information
Specification data - Smoothing and levelling underlay compounds
Product Reference

Sikafloor® 20 PurCem

Resin flooring -
Nominal thickness

6 to 9 mm recommended; insert requirement.

Colour

See 'Options' below and insert requirement.

Surface finish/ treatment

Not required

Standard product features

Application:

Rake to a uniform thickness and finish with a steel trowel.

Product Options

Colour:

Refer to colour chart. Consult manufacturer for details.

Similar products from Sika Limited