NBS Source
List your products
Description

Sensor panel designed to provide system status information for each vent within a smoke ventilation system. The repeater panel would typically be located near the fire service access entrance of the building to provide system indication. Whilst this product is not required under Building Regulations Approved Document B, it provides system status information in the event of a fire or for system maintenance. It has an aesthetically pleasing framed enclosure and includes configurable touch sensitive buttons for a lamp test or to silence the auditable alarm. System status indication has the ability to display battery fault, main power fault, communications fault or service due.

Features:

  • Battery backed in mains power failure for up to 72 hours.
  • Multiple systems can be displayed on one Repeater Panel.
  • Multiple Repeater Panels can be used on one system.
  • CE Marked and compliant to European regulations.
  • Includes a manual override via a key switch to force either fan on, off or automatic operation or to boost fan speed.

Indications per vent/ zone:

  • Green (Healthy).
  • Yellow (Fault).
  • Red (Active).

General information
Features

Battery backed in mains power failure for up to 72 hours

Multiple systems can be displayed on one Repeater Panel

Multiple Repeater Panels can be used on one system

CE Marked and compliant to European regulations

Includes a manual override via a key switch to force either fan on, off or automatic operation or to boost fan speed

Uniclass 2015 Mechanical services control panels (Pr_75_50_18_51)
Specification data
Product Reference

SHEVTEC® Repeater Panel

Standard product features

Technical properties:

  • Size (w x h x d): 164 x (H dependent on specification) x 24 mm.
  • Environmental protection: IP40.
  • Humidity: Non-condensing.
  • Input current (typical/ maximum): 20 mA/ 100 mA.
  • Input voltage: 18–30 V DC.
  • Temperature range: 0–60°C.

Similar products from SE Controls