NBS Source
I'm a manufacturer
Compare variants

SHADOW S

Verified by manufacturer 10 days ago

SHADOW S With Concealed Outlet, Left Hand Waste And Horizontal Trap BT00100574

Bathroom Engineering Ltd (Part of TECE GmbH) Variant:

Pre-formed showerbed.

Jump to:
+44 (0)1761 241133 Website

Application

Creates a superior ready to tile floor in a shower area or in a wet room. Suitable for:

  • En-suite and designer bathrooms.
  • Refurbishments and new build projects.
  • Floor and wall structures: Designed for concrete, easy adaptation to board/ joist installations.

Description

SHADOW S showerbed with an ultra-discrete gap between floor and wall. Pre-formed with a shallow gradient leading to a concealed channel hidden below the slim ‘shadow’ outlet. Waste water disappears into the channel below the tiles and is taken away to a high volume trap concealed below a removable tiled panel.


Features and benefits:

  • Supplied complete with factory fitted end gasket and internal corner piece.
  • Stainless steel tile support.
  • Adjustable and removable tile retainer for waste and trap.
  • Channel sealing blocks and adhesive.
  • Two part hard compressed polymer showerbed with flat underside and 1.5% flat gradient leading an outlet slot.
  • 7 mm ‘shadow’ outlet concealing full length integrated channel below close fitting tiles.
  • Two sizes available: 1200 x 1200 mm or 1200 x 2000 mm wide. Trim-able to 500 x 700 mm on-site.
  • Wheelchair suitable with minimum 100 x 100 mm tiles (50 x 50 mm with reinforcing matting).
  • Suits different floor coverings including tiles (12 mm thick) or natural stone (22 mm thick).
  • Left or right hand outlet position, for reduced pipe runs during installation.


Package includes:

  • Supplied complete with factory fitted end gasket and internal corner piece.
  • Stainless steel tile support.
  • Adjustable and removable tile retainer for waste and trap.
  • Channel sealing blocks and adhesive.


General information

Material

Polymer

Shape

Square

Rectangle

Size

1200 x 1200 x 12 mm

1200 x 2000 x 12 mm

1200 x 1200 x 22 mm

1200 x 2000 x 22 mm

Manufacturer guidance

Trim-able to 500 x 700 mm on-site.

Uniclass

Pr_40_20_06_84 Shower traysPrimary

CAWS

N13/375 Shower units

N13/377 Wet room showers

N13/40 Shower units

Specification data - Shower trays

Form

Square.

Materials

-

Body

Polypropylene moulded DIN 50 mm.

Manufacturer guidance

Waste and trap.

Size

1200 x 1200 mm.

Shower Waste

Left hand side.

WasteTrapType

Horizontal.

Profile

60/ 48 mm showerbed, 105/ 93 mm overall including support and trap.

Gradient

1%, flat.

Waterproofing

Standard factory finish – KMK (polymer cement mortar).

Adapter

DIN 50 mm compression to 2 inch, ABS solvent weld.

Tile thickness

12 mm.

Similar products from Bathroom Engineering Ltd (Part of TECE GmbH)

e-Form 22™

e-Form 22™

SHADOW

SHADOW