Compare

SF52 Mullion Drained Curtain Wall System

Name: SF52 Mullion Drained Curtain Wall System
Brand: Senior Architectural Systems Ltd
SKU: ca8MUAcPJf4z4TgnUdLR2q

Senior Architectural Systems Ltd

Curtain wall system with enhanced thermal performance.

Jump to:

+44 (0)1709 772600 www.seniorarchitectural.co.uk

Description

A curtain wall system which has been designed to enhance thermal performance meaning the system can exceed current building regulations. It is a stick type front loaded system using spring pins and a specially designed cleat which allows square cutting throughout.

Features and benefits:

The system can be either zone drained (via conventional pressure plate drainage or using a specially designed spout system) or it can be mullion drained.
The zone drained system can be assembled capped, uncapped (using the SAS toggles) or combination of the two.
Section sizes vary from 50—250 mm (50, 80, 100, 125, 150, 175, 200, 225 and 250 mm).
Specific profiles can be incorporated offering design flexibility.

General information

Material	Aluminium Alloy.

Uniclass	Ss_25_10_20_85 Stick curtain walling systemsPrimary
CAWS	H11/110 Curtain walling

Product range	SF52 curtain wall systems

Specification data - Stick curtain walling systems Enhanced data

Framing	-
Frame members	Aluminium alloy curtain wall frame sections. Aluminium alloy 6060, 6063 or 6083 (for improved strength). T6 to BS EN 755-9 or BS EN 12020-2.
Cladding units	-
Glass units	Insulated glass units (IGUs). Insert required thickness. 22–50 mm thick glazing available. Consult with Senior Aluminium Systems for recommendations and details. All glazing complies with BS 6262 and ground floor glazing will comply with Secure By Design (inner pane to be a minimum of 6.8 mm laminated).
System accessories	Aluminium/ co extruded plastic pressure plate. Fixed to mullions and transoms at a maximum of 25 mm from ends and at a maximum of 150 centres.

Type	SF050. SF080. SF100. SF125. SF150. SF175. SF200. SF225. SF250. As drawing. Insert details. Show more
Vertical	SMR998. SMR997. SCW002. SCW008. As drawing. Insert details.
Horizontal	SMR997. SCW055. SCW003. SCW007. As drawing. Insert details.
Perimeter edge/ thermal break	Extruded to BS 7619.
Gasket	Manufactured in accordance with BS 3734.
Air permeability	600 Pa. Tested to CWCT specification sequence B and in accordance with BS EN 13830.
Watertightness	600 Pa. Tested to CWCT specification sequence B and in accordance with BS EN 13830.
Wind resistance	2400 Pa. Tested to CWCT specification sequence B and in accordance with BS EN 13830.
Mullion	Insert requirents. Mullion size dependent on wind load, mullion centres and tie back positions. Transom size subject to span and glass weight and in-conjunction with architectural design.